Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in San Francisco, CA
A fence gate in San Francisco typically runs $450 to $1,900 installed, depending on whether it’s a walk gate or a driveway gate, the material, and whether it needs an opener or self-closing hardware. A gate is the piece of the fence that gets used every single day – it’s the part that has to line up, swing clean, and latch the same way in year five as it did on week one. We build and hang gates as part of our Fence Installation service, and we treat the gate with the same attention we give the fence line itself.
Most San Francisco properties don’t have a simple, flat run of fence. There’s a sloped lot in Noe Valley, a tight side yard in the Inner Sunset, a driveway that meets the sidewalk at an angle in the Richmond. A gate on a Hill District or Sunset property has to account for grade, fog-cycle swelling, and hardware that won’t seize up in our coastal damp. We size, build, and hang gates for those conditions, not for a flat-lot model home. If you’ve got a gate that drags, sags, won’t latch, or never got installed with the fence in the first place, call us at (866) 320-2646 and we’ll get you a straight answer and a free estimate.
We back the work with our 730-Day Done Right Promise – if the gate isn’t hanging right or the hardware fails inside that window, we come back and make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to a single gate the same as it does to a 200-foot fence line.
Key Takeaways
- Walk gates in San Francisco typically run $450 – $1,200 installed; driveway and vehicle gates run $1,100 – $1,900 and up for automated systems.
- Marine air, fog, and slope are the three things that fail most gates here. Hardware and post setting matter more than the gate panel itself.
- We hang gates on properly set posts with adjustable hinges, so a gate that drops over time can be re-trued instead of rebuilt.
- Every project is backed by the 730-Day Done Right Promise and quoted with upfront pricing – the number you see is the number you pay.
When You Need Fence Gates
Gates fail slowly and then all at once. Here’s what we hear most from San Francisco homeowners, and each of these is a good reason to get a gate looked at before it becomes a bigger repair.
- A gate that drags or won’t latch. On a sloped lot – and that’s most of San Francisco, from Bernal Heights to Twin Peaks – a gate hung without accounting for grade will start dragging within a season. If you have to lift it to close it, the post or hinge has already moved.
- You’re replacing a fence and the old gate doesn’t match. New fence panels make an old gate look worse and often reveal that the gate post was never set deep enough. We build the gate to match the new fence line and set the posts to hold it.
- You bought a house with no side-yard gate. In tighter lots like the Mission or Inner Richmond, a side gate is often the only way to get a bike, stroller, or trash bins from the front to the back. We build walk gates sized for daily use, not just for looks.
- The gate sags after a windy winter. San Francisco’s fog and wind cycles work on gate hardware in a way that inland climates don’t. A sagging gate isn’t a panel problem – it’s usually a hinge and post-setting problem.
- You need a driveway gate for security or privacy. A vehicle gate on a driveway off the street gives you a secure line for cars, deliveries, and access to an ADU or rear unit. We build swing and slide gates and can set them up for a manual latch or automated opener.
- The gate hardware has seized or gone loose. Salt air and moisture rust out cheap hinges and latches faster than the gate panel itself. We replace hardware with marine-rated or heavy-duty galvanized options that hold up to the coastal air.
Our Fence Gates Process
We don’t sell a gate as an afterthought to the fence. Here’s how we run a gate project from first call to final swing.
- On-site measure and grade check. We measure the opening, check the grade, and look at what the gate post will sit in – soil, existing concrete, or a new footing. On a San Francisco slope, this is the step that decides how the gate is going to hang and swing. We also check property lines and any HOA or permitting considerations before we quote.
- Upfront pricing and material selection. We give you a written, itemized price – the number you see is the number you pay. You pick the gate material (wood, composite, or metal) and the hardware package, and we explain what each choice means for maintenance in our climate. No surprise add-ons once work starts.
- Post setting and framing. A gate is only as good as the post it hangs from. We set gate posts to the right depth and use proper footings for the soil and grade, then frame the gate so it holds its shape. This is the part most quick gate jobs skip, and it’s the reason so many gates drag within a year.
- Gate build and hang. We build or fit the gate, hang it on adjustable hinges, and set the latch and any self-closing or opener hardware. We check the swing through the whole arc, not just open and shut, so it clears the ground and the fence line all the way through.
- Final walkthrough and adjustment. We walk the gate with you, check the latch, check the swing, and adjust anything that isn’t right. You get the full rundown on the hardware and how to keep it working. Then the 730-Day Done Right Promise goes on the work.
Fence Gates Pricing in San Francisco
Fence gate pricing in San Francisco depends on gate type, material, size, and hardware. Here’s the honest range for 2026, with the line items that move the number. Every quote is no-hassle upfront pricing, and the free estimate and design consult costs you nothing.
| Gate type / work | Typical installed range |
|---|---|
| Standard wood walk gate (4 – 5 ft wide) | $450 – $900 |
| Composite or premium wood walk gate | $700 – $1,200 |
| Metal or ornamental walk gate | $800 – $1,500 |
| Driveway swing gate (wood or composite) | $1,100 – $1,900 |
| Driveway slide gate | $1,400 – $2,500 |
| Automated opener added to a gate | $900 – $2,200 |
| Hardware upgrade (adjustable hinges, marine-rated latch, self-close) | $80 – $300 |
| Post reset or new gate post footing | $250 – $600 per post |
What moves the number most:
- Gate type. A walk gate is the bulk of the work we do. A driveway gate is a bigger build and a bigger hardware package, especially if it’s automated.
- Material. Wood is the most common and the most affordable up front. Composite and metal cost more but need less upkeep in our coastal air. We can match your gate to brands we already work with across our other trades, so if you’ve used James Hardie siding or a KraftMaid kitchen with us, you already know the standard we hold materials to.
- Grade and slope. A gate on a slope needs a different hanging approach and sometimes a different post setting. This is common on San Francisco lots and it’s a real line item, not a markup.
- Hardware and automation. Adjustable hinges and a marine-rated latch are worth the small extra cost in this climate. An automated opener is its own line item and needs power run to it.
- Post condition. If the existing post is rotted or set too shallow, it has to be reset or replaced. That’s the single most common reason a gate sags, and it’s an honest repair, not a rebuild.
We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which matters when a gate is part of a bigger fence or driveway project. If you’re doing the whole fence, the gate often comes in at a better combined price than a standalone gate job. Call us at (866) 320-2646 for a free estimate – no-hassle pricing, and a live person answers whenever you call. We can also handle related exterior work through our home services, from fence repair to driveway and paver work, so you’re not juggling three contractors for one exterior project.
FAQs – Fence Gates
How much does a fence gate cost in San Francisco?
A walk gate in San Francisco typically costs $450 – $1,200 installed, and a driveway gate runs $1,100 – $1,900 or more, with automated openers adding $900 – $2,200. The final number depends on gate type, material, grade, and hardware. Call (866) 320-2646 for an exact quote – estimates are free and we give you upfront pricing, so the number you see is the number you pay.
Why does my gate drag or stop latching?
A dragging gate is almost always a post or hinge problem, not a gate panel problem. In San Francisco, slope, soil movement, and fog-cycle swelling work the hinges and post setting over time, and a gate hung without accounting for grade will drag within a season. The fix is usually adjustable hinges and a post reset, not a new gate. Call us for a free look – we’ll tell you what’s actually wrong before you spend on a replacement.
Can you install a gate on a sloped yard or a tight side yard?
Yes. Sloped lots and tight side yards are the norm in San Francisco, not the exception, and we measure grade and clearances before we quote. A gate on a slope gets hung to swing through its full arc without dragging, and a tight side gate gets sized to what you actually need to move through it. Call (866) 320-2646 and we’ll set up a free on-site measure.
Do you offer automated driveway gates?
Yes. We build swing and slide driveway gates and can set them up with an automated opener, including running power to the gate. Automation adds $900 – $2,200 to the gate cost depending on the opener and the access setup. Call us for a free estimate and we’ll scope the opener and the power run together.
What kind of gate hardware holds up to San Francisco fog?
Marine-rated or heavy-duty galvanized hinges, latches, and self-closing hardware hold up far better to coastal fog and salt air than standard hardware. It’s a small upcharge ($80 – $300) that saves you a hardware replacement in a couple of years. We’ll recommend the right package for your gate when we’re on site. Call (866) 320-2646 to talk it through.
Do I need a permit for a fence gate in San Francisco?
Fence and gate permits in San Francisco depend on height, location, and whether the gate faces the street, and rules can vary by district. We check the permitting picture before we quote so there are no surprises mid-project. Call us for a free estimate and we’ll tell you what applies to your property.
Can you match my gate to my existing fence?
Yes. We build gates to match the fence line, whether it’s wood, composite, or metal, so the gate looks like it belongs. If the fence itself needs work, we can quote the fence and gate together – that often comes in at a better combined price than doing them separately. Call (866) 320-2646 for a free estimate.
Why San Francisco Homeowners Call Groundwork Construction Co.
Gates are a small job with a lot of failure points – grade, hardware, post depth, and a climate that works on all three. We’ve handled enough of them in San Francisco to know which shortcuts cause problems and which ones don’t. Our technicians have up to 12 years of experience, they arrive in uniform and background-checked, and your call is answered by a live person 24/7 – no voicemail, no waiting until Monday morning. We match our gates to the same material standard we hold across our other trades, including brands like James Hardie and KraftMaid, so the gate isn’t the weak link in a project where everything else is done right.
And it’s all covered by the 730-Day Done Right Promise, backed in writing. If it’s not done right, we make it right. Upfront pricing, no surprises. From foundation to finish line, we’re the single contractor for the job.
Get a Free Fence Gate Estimate in San Francisco
If your gate drags, won’t latch, or you need a new one built to fit your property, call Groundwork Construction Co. of San Francisco at (866) 320-2646. We’ll set up a free estimate and design consult, give you upfront pricing, and tell you honestly whether your existing gate can be repaired or needs to be replaced. Live person, 24/7, and a 730-Day Done Right Promise on the work.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.