Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in San Francisco (And Why One Measurement Won’t Do)
Measure the width at the top, middle, and bottom of the opening, and the height at the left, center, and right, then order to the smallest of those three readings. In San Francisco, those three numbers rarely match, and the smallest one is the only safe spec. A single tape pull in a 1908 row house is how homeowners end up with a custom unit that arrives three weeks later and doesn’t fit.
If the variance is larger than you expected, or the opening is out of square, call us at (866) 320-2646. We measure and verify before anyone orders a thing.
Why the opening at the top and the opening at the bottom don’t agree
In a 1908 row house in the Mission or Noe Valley, your window opening is usually not the same width at the top as it is at the bottom. That’s not a defect. It’s a century of the building doing what wood-frame buildings do: settling on brick foundations, absorbing seismic movement, and letting original plaster creep into the frame depth.
We see the same pattern across the west-side hills too, where marine fog and salt air have had a hundred years to work on timber and fasteners. That climate is also why we spec stainless hardware and galvanized flashing even on small jobs: standard fasteners on the fog belt corrode in a fraction of the time they’d last east of the hills.
Typical variance in San Francisco’s older stock lands between 1/4 inch and 3/4 inch. On badly settled openings, it goes wider. Whichever number you record at the bottom is the one the window has to clear.
The three-point measurement method, done properly
Here’s the sequence we use on any window we’re replacing, whether the unit is a stock Andersen or a custom Marvin sash:
- Width: measure at the top, middle, and bottom of the opening. Record all three. The smallest is your width.
- Height: measure at the left, center, and right. Again, smallest wins.
- Depth: measure the frame depth at the top and both jambs. Plaster reveals often narrow the usable depth, so measure the actual opening, not the trim face.
- Squareness: pull diagonals corner to corner. If they differ by more than about 1/4 inch, the opening is out of square and needs a pro measure-and-verify.
Write the numbers down with a sketch. Don’t trust your memory, and don’t round up “to be safe.” Rounding up on a custom order is how you get a unit that won’t fit.
Rough opening, daylight opening, or existing frame: which number do you actually order to?
Three different numbers get asked for, and mixing them up is the most common ordering mistake we see in San Francisco.
Daylight opening is the clear glass area you can see through. Useful for comparing styles and light, useless for ordering.
Existing frame is the visible sash and casing in the wall right now. That number tells you what’s there, not what fits once the old unit comes out.
Rough opening is the framed hole in the wall behind the casing. This is the number a manufacturer’s spec sheet wants, and it’s the one you’ll confirm against an Andersen or Marvin order sheet before the unit ships.
For a same-size retrofit, you can often measure the existing frame and match it. For a custom sash or any change in unit style, the rough opening is the number that matters, and it usually isn’t visible until the old window comes out.
The plaster-reveal complication in Victorian homes
This is the detail that causes more misfires on San Francisco jobs than any other. Original plaster window casings frequently extend into the frame depth, reducing the usable rough opening by 3/8 inch or more on each side. The exposed trim is painted over and easy to miss. On paper, the opening measures one thing. In practice, the plaster cheeks eat enough of it to shift the order spec.
We’ve seen this on enough 1880s-1920s Victorian and Edwardian homes that we don’t trust a homeowner measurement for a custom unit anymore. Not because homeowners measure badly; because the wall hides part of the answer.
When a homeowner measurement is enough, and when it isn’t
A tape measurement is genuinely useful information. It tells you whether a project is in the $5,310-$17,700 window replacement range or pushes toward the $9,440-$29,500 impact window range. That’s real budgeting help, and we’re glad to work from your numbers for a preliminary quote.
Once you’re ready to order, that changes. Custom orders require a professional measure-and-verify because the liability sits on the measurement: an incorrect order means weeks of delay and often a non-refundable unit.
At Groundwork Construction Co. of San Francisco, every window job includes a professional pre-order verification measure. That’s the point where Windows & Doors pricing gets locked. It doesn’t get revised after the unit arrives, which is how surprise costs happen on other jobs. The 730-Day Done Right Promise then backs the installation, in writing, for two full years.
What the professional measure adds
- Confirmation of the rough opening behind the plaster and casing
- Diagonal check to catch out-of-square openings from settling
- Frame depth verification against the exact unit spec being ordered
- A printed, upfront price that stays put after ordering
San Francisco window measurement at a glance
| Window type | Typical cost range |
|---|---|
| Window replacement (standard) | $5,310-$17,700 |
| Impact window installation | $9,440-$29,500 |
Steep hillside lots and tight urban lots in San Francisco add measurement complexity: scaffolding may be required, and some openings need access from a shared lightwell. We plan that into the number, not after the fact. Background-checked technicians in uniform do the measure, and calls are answered by a live person, 24/7.
For neighborhood-level context on how we handle the full project scope, see our San Francisco service area page.
FAQs
Measure width at top, middle, and bottom, and height at left, center, and right, and order to the smallest reading. In San Francisco’s older Victorian and Edwardian homes, expect 1/4 to 3/4 inch of variance across the opening. If you want it verified before ordering, call (866) 320-2646; estimates are free.
Yes. A homeowner measurement is enough for a preliminary quote and a realistic budget range. It’s not enough to order a custom unit, because the rough opening and any plaster reveal only become visible once the old window comes out. Call (866) 320-2646 and we’ll set up a professional verification measure before you commit to an order.
Daylight opening is the clear glass area you can see through; the rough opening is the framed hole in the wall behind the casing, and it’s the number manufacturers use for ordering. Order from the daylight opening and you’ll be off by the width of the frame on every side. Call (866) 320-2646 for an exact spec check – estimates are free.
Pull the two diagonals corner to corner; if they differ by more than about 1/4 inch, the opening is out of square. That’s common in San Francisco stock that’s settled on brick foundations, and it means a custom unit needs a professional measure. Call (866) 320-2646 for an exact quote.
Often yes, same-day appointments are available depending on routing, and our phone line has a live person 24/7, not voicemail. Call (866) 320-2646 and we’ll find the earliest slot. There’s also $1,000 off projects over $10,000 and 0% financing for 18 months if you’re ready to move.
If you’d rather have it looked at than gamble on the tape measure, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco. Call (866) 320-2646 for a free estimate, upfront pricing, and a measurement you can order from with confidence.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.