Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Impact Windows Cost in San Francisco (and Why the Permit Is a Line Item)
Impact window installation in San Francisco typically runs $9,440 to $29,500 for a whole-house package, and window replacement of any kind lands between $5,310 and $17,700 depending on frame material, glazing spec, and how much structural work the opening needs. But the number most calculators miss is the Planning Department review that governs window replacement on pre-1940 facades. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate that accounts for it.
Here’s the risk in plain terms. Replacing windows on a San Francisco Victorian or Edwardian facade without Planning Department approval is a code violation. The remedy is not a fine you pay and move on from. It’s reverting to a window profile that matches the original, at the homeowner’s expense. That’s why the design and permit cost is a mandatory line item on our bids, not a surprise added later.
How much does impact window installation cost in San Francisco?
Pricing here splits into three buckets: the window unit and labor, the historic-preservation work, and any structural framing the rough opening requires. Use the table below as a starting frame. Every one of these ranges assumes a standard wood-frame row house with an accessible opening.
| Line Item | San Francisco Cost Range |
|---|---|
| Impact window installation (whole-house package) | $9,440 - $29,500 |
| Standard window replacement | $5,310 - $17,700 |
| Historic-facade design review & permit fees | $2,000 - $8,000 |
| Header calculation / structural change in a bearing wall | Quoted per opening after framing inspection |
Two of those rows should worry you, and they’re the two a national impact-window calculator will never show. The first is the $2,000 to $8,000 design and permit band. The second is the header work. In an SF wood-frame row house, window rough openings are frequently part of the lateral wall system. Replacing a window in a bearing wall means a header calculation, and sometimes a structural change. No online estimator includes that.
That’s the honest reason to get a real quote on site rather than trust a web tool. We’ll come out, look at the framing, and put upfront pricing in writing. The number you see is the number you pay.
The historic preservation overlay: why your Victorian’s windows aren’t a free choice
Most pre-1940 residential facades in San Francisco fall under Planning Department review for window replacement. Your replacement has to match the original profile: divided lights, specific sash dimensions, the depth of the reveal. If you want something that doesn’t match, you’re filing for a variance. Those take time and money, and they aren’t guaranteed.
What this means practically is that the window you pick for the front of the house is often dictated by what was there in 1912. Sidelites and transom configurations, the number of lights per sash, the wood versus clad exterior face: all of it gets reviewed. It’s a real design constraint, and it’s why we spec the front elevation separately from the back. The rear wood-frame walls, side additions, and any non-contributing elevations don’t carry the same scrutiny, and that’s where homeowners get to make an unfettered choice.
Our technicians have up to 12 years of experience reading these facades, and we’ll tell you up front which openings are governed by review and which aren’t. That single conversation usually saves more than it costs.
Why Andersen and Marvin spec out for the fog belt and bay exposures
San Francisco isn’t a hurricane market. Impact windows here are a seismic and salt-air defense system, and the material spec needs to match. Standard aluminum-clad windows corrode within five to eight years on west-side and bay-facing exposures, because the marine fog and ocean salt eat standard fasteners and paint within a fraction of the normal lifespan.
We spec Andersen and Marvin products with marine-grade hardware and coatings as the standard for every west-side and bay-facing wall. That’s not sales talk. Contractors on the west side of the city learn to spec stainless hardware and galvanized flashing even on small jobs, or they come back in a few years to redo the work.
- Marine-grade hardware: stainless hinges, latches, and operators that don’t pit in salt air
- Coastal-rated coatings: finish systems that hold up to fog-belt damp on the west-side hills
- Galvanized flashing: at every sill and head, not just the water-facing side
- Frame-side seal and weatherproofing: the detail that keeps fog out of your wall cavity
You can choose from the full curated portfolio: Andersen and Marvin for windows, GAF and CertainTeed on the roofing side, and brands like Toto and Schluter inside for bath and kitchen work if a window replacement turns into a larger project. See our full Windows & Doors service page for the complete material menu and glazing options.
The real value in San Francisco is moisture control, not utility savings
Most impact-window marketing leans hard on energy bills. That math doesn’t hold in San Francisco. Heating loads are low, winters are mild, and the utility savings from a glazing upgrade are modest. The value here is different, and it’s worth being specific.
Our climate is mild but persistently damp. That persistent damp drives condensation on single-pane glass and old seals, and condensation drives mold risk inside the wall assembly and on the interior sill. New glazing with a proper marine-grade seal cuts that condensation cycle, which extends the life of your interior finishes and your structural framing. In a house with a brick foundation and a 100-year-old wood frame, structural preservation is the return on the investment, not the gas bill.
The energy savings you do get are real but secondary. Think of impact windows here as a moisture barrier that happens to lower your bill a little. If you want the broader exterior-and-interior context, our San Francisco service area page covers how window work fits into everything else we do from foundation to finish line.
One more thing worth saying plainly. This is a window replacement, not a spring or a cable, but it’s still a job with real structural consequences. A mis-sized header in a bearing wall, or flashing done wrong, shows up as a slow leak you won’t see until the frame has rotted. We don’t hand out step-by-step instructions for bearing-wall work for the same reason. It’s a trained-professional job.
What the 730-Day Done Right Promise covers on windows
Here’s how the guarantee actually applies to window work. Our 730-Day Done Right Promise covers installation workmanship for two full years. If a seal fails, flashing leaks, or operation degrades in that window, we make it right without a service call debate. No arguments about who’s responsible. We are.
That matters more on impact windows than on almost any other product, because the failure modes are slow and hidden. A window that opens fine on day one and binds by year three is usually a flashing or a shim problem, not a product defect. The promise puts that on us, not on you.
The other commitments that come with the job:
- Background-checked, uniformed technicians on every project
- Calls answered by a live person, 24/7 if something goes wrong after hours
- 0% financing for 18 months and $1,000 off projects over $10,000 on qualifying work
- Free project estimate and design consult before you commit to anything
We also understand that a window project on an SF row house is often the first step of a larger exterior scope. If the permit review or framing inspection turns up something bigger, our team handles roofing, siding, and full home additions and ADU work under the same guarantee. You can start with the home page to see the full scope.
FAQs
Yes, usually by a meaningful margin. Impact window installation runs $9,440 to $29,500 for a whole-house package, while standard replacement lands at $5,310 to $17,700. The gap comes from the glazing spec, marine-grade hardware, and the heavier framing some openings require. Call (866) 320-2646 for an exact quote; estimates are free.
Most likely, yes. If your home has a pre-1940 residential facade in San Francisco, window replacement generally requires Planning Department review, and the new window must match the original profile: divided lights, sash dimensions, and reveal depth. Expect $2,000 to $8,000 in design and permit fees if you need a variance. Call us at (866) 320-2646 and we’ll tell you which of your openings are governed before you buy anything.
Well, when they’re spec’d right. Standard aluminum-clad windows corrode within five to eight years on west-side and bay-facing exposures. We use Andersen and Marvin products with marine-grade hardware and coatings as the baseline for those walls, plus galvanized flashing at every sill and head. Call (866) 320-2646 and we’ll spec your elevations correctly.
Somewhat, but that’s not the main return. SF’s mild climate means heating loads are low, so the bigger benefit is moisture control: less condensation, lower mold risk, and longer life for the framing and interior finishes. If you’re weighing the upgrade, call (866) 320-2646 for a free estimate and we’ll walk through the real math.
Get a written price before you sign anything
Window projects in San Francisco go wrong in predictable ways: a bid that leaves out the permit, a framing surprise in a bearing wall, or hardware that rusts out in five years. Groundwork Construction Co. of San Francisco puts all of it in writing, backed by the 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate and design consult. Live person, 24/7.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan