Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in San Rafael: What the Job Actually Involves
Impact windows & doors in San Rafael typically run $8,000 – $25,000 for a whole-house package, with most single-family installations landing in the $14,000 – $19,000 range. A typical house takes 2 – 4 days on site once materials arrive, and custom orders run 6 – 10 weeks from signed contract to final inspection. Call (866) 320-2646 and we’ll walk your property, measure every opening, and put a written line-item quote in your hands before you commit to anything.
What separates impact-rated work from a standard replacement is the assembly, not just the glass. The frame, the anchoring, the laminated glazing, and the door hardware all have to work together to hold a pressure differential and resist wind-borne debris. Get any one piece wrong and the rated performance is fiction.
How We Run an Impact Window & Door Job Here
Every installation follows the same five stages. What changes is the numbers: how many openings, how much rot we find behind the trim, and whether your frames are set into stucco, wood siding, or a hillside foundation wall.
Stage 1: Site Walk and Opening-by-Opening Measurement (half a day)
We measure every opening, note the wall assembly, and photograph existing damage. You decide the priority order at this stage: which rooms first, whether the front door and the slider get done in the same phase, and whether you want matching hardware throughout. On hillside lots we also look at how the exterior wall meets the foundation, because that’s where water intrusion hides.
Stage 2: Product Selection and Order (1 – 2 weeks)
You choose the material system, glazing package, and finishes. We confirm the wind-load rating the assembly needs to meet, then place the order. This is the longest single wait on the job: 6 – 10 weeks for custom sizes and colors, closer to 3 – 4 weeks for standard sizes in stock finishes. We give you the order confirmation and the delivery window in writing so you’re never guessing.
Stage 3: Permitting and Pre-Installation Prep (2 – 4 weeks, overlapping with the order)
We pull the permit and submit product data sheets showing the assemblies meet the required design pressure. Then comes the prep: protecting floors, moving furniture back from the openings, and staging the demo. You don’t have to be home for this stage.
Stage 4: Demo and Installation (1 – 4 days on site)
Each opening comes out, the rough opening gets inspected and repaired if needed, and the new unit goes in with the correct flashing and sealant sequence. Most homes stay livable during the process; we close each opening the same day it opens. If a wall has dry rot or a failed header, we stop, show you photos, and quote the repair before proceeding.
Stage 5: Inspection and Final Walkthrough (1 day)
The city inspector signs off, then we walk every opening with you. We test operation, check the weather seal, and leave you the product documentation and warranty paperwork. Anything that needs adjustment gets scheduled before we close the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Impact-rated assemblies aren’t one product. The choices below are the ones that actually change your price and your outcome.
- Frame material: Vinyl is the value play, $8,000 – $13,000 for a typical house, and holds up well in San Rafael’s warm, sheltered climate. Aluminum frames run $12,000 – $18,000 and take narrower sightlines, which matters on older homes where the original windows were lean. Wood-clad aluminum, $16,000 – $25,000, is the best match for a West End craftsman or a Dominican-area bungalow where the trim profile matters.
- Glazing package: Laminated impact glass is the core requirement. The upgrade decision is whether to add a low-E coating for solar control, which matters more on south and west elevations with afternoon sun. It adds roughly $80 – $150 per opening.
- Door systems: A standard impact-rated entry door with reinforced strike plates and multi-point locking is the baseline. Sliding or multi-slide patio doors cost more, $3,500 – $7,000 each installed, and need heavier anchoring and a sturdier track than standard sliders.
- Hardware and finish: Standard finishes come with the package. Custom color matching and upgraded hardware add $50 – $200 per unit. This is where homeowners tend to overspend on aesthetics and underspend on anchoring, which is the wrong trade.
- Reinforcement scope: On the hillside and hilltop homes above downtown, we often find the wall framing itself needs strapping and blocking before a heavier impact assembly can be anchored properly. That’s a $600 – $2,000 add-on depending on how many openings are affected.
If the wider scope includes replacing standard windows on the protected sides of the house at the same time, that’s a reasonable split. Our Windows & Doors service covers the full range, and your estimate can separate the two scopes so you can phase the work.
What Impact Windows & Doors Costs in San Rafael, CA
Installation in San Rafael runs $8,000 – $25,000 for a typical single-family home, with $14,000 – $19,000 the most common range for a full-house impact package. The five variables below move a job from the low end to the high end.
| Line item | Typical range |
|---|---|
| Whole-house impact package (10 – 16 openings) | $8,000 – $25,000 |
| Impact-rated entry door, installed | $1,800 – $4,500 |
| Impact sliding or patio door, installed | $3,500 – $7,000 |
| Structural reinforcement and blocking | $600 – $2,000 |
| Rot repair behind existing trim | $400 – $2,500 |
Size and count: The single biggest factor. Six large openings cost more than twelve small ones. Existing condition: A 1920s West End home with old framing and rot will run higher than a Terra Linda split-level with clean openings. Frame material: The vinyl-to-wood-clad spread is roughly $8,000 across a full house. Structural work: Hillside properties that need blocking and strapping before anchoring push toward the top of the range. Permit scope: A full-house permit with inspection draws more documentation than a handful of like-for-like units.
Every written estimate lists product, labor, permit, and disposal as separate line items. What’s typically not included: hidden rot discovered after trim removal, and structural repairs the inspector requires mid-job. Both get quoted before we continue, never quietly added. Call (866) 320-2646 for an exact quote on your house; estimates are free, and the pricing carries our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the county seat, and its permitting reflects that. Any impact window or door replacement that alters the opening, changes glazing area, or triggers a structural repair needs a building permit, and the wind-load documentation required depends on the site’s exposure category. Hillside homes above downtown and Dominican, sitting on sloped lots behind older retaining walls and cribbing, often need engineering input before an inspector will sign off on heavier assemblies anchored to that wall. That’s slower and more documentation-heavy than a flat-lot job in a neighboring inland town, and it’s the reality of building here.
The housing stock shapes the work. In the West End and the downtown grid, we’re often working on early-1900s craftsman and bungalow homes where the original framing is undersized for a modern impact assembly and needs blocking. In Terra Linda, the mid-century tracts have cleaner openings but sometimes show dry rot at the sill traps. And the Canal district’s older apartments and multi-family buildings present a different problem: shared walls, tenant access, and fire-life-safety review layered on top of the window permit. Winter rain concentrating off the surrounding hills makes flashing the most important detail on any installation we do here.
We cover all of San Rafael, from the 94901 ZIP downtown through 94903 in Terra Linda, along with San Anselmo, Larkspur, Corte Madera, and Mill Valley.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Impact Windows & Doors in San Rafael
Plan for 6 – 10 weeks from signed contract to final inspection for custom units, or 3 – 5 weeks for standard sizes. The on-site installation itself is 1 – 4 days depending on how many openings you’re replacing. Call (866) 320-2646 and we’ll give you a date range for your specific products.
Yes, in almost every case. Any replacement that changes the opening, alters glazing area, or touches structural framing requires a building permit and wind-load documentation. Like-for-like replacement in the same opening may qualify for a simpler review, but we confirm with the city before assuming. We pull the permit and handle the inspection.
Our written quote is fixed for the scope in it. The two things that can change it: dry rot discovered after trim removal, and structural repairs the inspector requires mid-job. We photograph both, quote the repair, and wait for your approval before continuing. Call (866) 320-2646 for a free estimate with line items you can hold us to.
Usually, yes. Most replacements go into the existing openings, so plumbing and electrical stay put. The exception is hillside homes where the anchoring requires added blocking and strapping, which is a framing repair inside the wall cavity, not a relocation. We flag that during the site walk if we suspect it.
Our workmanship is covered by the 730-Day Done Right Promise; if it’s not done right, we make it right. The window and door manufacturers carry their own product warranties on glass, frames, and hardware, and we hand you that documentation at the final walkthrough.
Get a Free Estimate for Impact Windows & Doors in San Rafael
Call (866) 320-2646 and a live person answers, day or night. We’ll schedule a free on-site estimate, measure every opening, and give you a written line-item quote with products, labor, permits, and disposal broken out. If you’re weighing a larger project, a full Windows & Doors in San Rafael scope can pair with this work, and homeowners often add an Aluminum Fence in San Rafael or an Iron Fence in San Rafael at the same time.
Written by the team at Groundwork Construction Co.