Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Sonoma, CA: What It Costs and How Long It Takes
Metal roofing in Sonoma, CA typically runs $15,000 to $40,000 for a full installation, and most homes are torn off and re-roofed in three to six working days. The figure swings with square footage, panel type, roof pitch and how much repair the decking needs once it’s exposed. If you’re pricing it against asphalt or tile, call (866) 320-2646 for a free on-site estimate and a written line-item quote.
How a Metal Roof Goes On: The Sequence We Follow
Metal isn’t installed the way shingle or tile is. The panel system dictates the order of work, and skipping a step here shows up as a leak five winters later. Here’s what actually happens across the week.
Stage 1: Roof inspection and decking assessment (day one)
We start by checking the existing roof from the deck up, not just the surface. That means looking at sheathing condition, flashing details, and any soft spots where moisture has been sitting. On older Sonoma homes with raised foundations and later additions, this is also where we find out whether previous roof layers were layered or torn off. You’ll get the findings before any material is ordered.
Stage 2: Tear-off and decking repair (day one to two)
The old roofing comes off down to the decking. Any rotten sheathing gets replaced, and that’s a real line item, so you’ll see it priced per sheet before we proceed. This is the stage where unknowns surface. On a 1970s wine-country estate or a Plaza-area Victorian, we don’t assume the deck is sound until we’re looking at it.
Stage 3: Underlayment and flashing (day two to three)
Synthetic underlayment goes down next, followed by ice-and-water membrane at the valleys and penetrations. Drip edge and flashing get installed before any panel goes up. This stage matters most in wildfire country, where ember-resistant detailing at vents and eaves is part of the roof assembly, not an afterthought.
Stage 4: Panel installation (day three to five)
This is where you decide, before we start, whether you want standing seam or exposed fasteners. Standing seam panels are formed and seamed with concealed fasteners; corrugated or through-fastened panels use screws with washers. Panels get laid from the eave up, and trim, ridge caps and closures finish the assembly. You’ll choose panel color and profile at the estimate stage, not here.
Stage 5: Final inspection and cleanup (day five to six)
We walk the roof, check every seam and penetration, confirm ventilation, and clear the site. You get a final walkthrough before we call it done. Workmanship is covered under our 730-Day Done Right Promise, which means if the installation isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Most of the decision happens at the estimate, not mid-job. These are the real trade-offs.
- Standing seam steel: The premium option. Concealed fasteners, long lifespan, clean look. Runs toward the top of the range and suits architectural homes and wine-country estates where appearance matters as much as performance.
- Through-fastened (corrugated) panels: Lower cost, faster install, good for outbuildings, additions and less visible roof planes. The fasteners are visible and need occasional checking, but the savings are real.
- Aluminum vs. steel: Steel is heavier and needs rust protection; aluminum resists corrosion better and weighs less. Steel from CertainTeed is a common durable choice, and aluminum is often preferred near humidity or where weight is a concern.
- Finish and warranty: Painted finishes with a factory warranty versus mill finish. Better coatings cost more up front but hold color longer under Sonoma’s sun.
- Panel profile and color: Affects both appearance and, if you’re in a review district, whether the design will pass. Choose early.
What Metal Roofing Costs in Sonoma, CA
Budget $15,000 to $40,000 for a full metal roof installation on a Sonoma home. The number at the low end is a modest footprint with through-fastened panels; the high end reflects a larger, more complex roof with standing seam and significant decking repair.
Five things move that figure:
- Roof size and pitch: Bigger and steeper roofs take more panels and more labor hours.
- Existing roof condition: Layered roofs, rot or multiple tear-off layers add disposal and decking cost.
- Material grade: Standing seam and premium finishes cost more than corrugated panels.
- Complexity: Valleys, dormers, skylights and multiple roof planes slow the install and add flashing.
- Permit and review scope: A simple re-roof permit is straightforward; anything touching structure or design review adds time and cost.
A written estimate from us includes tear-off, underlayment, flashing, panels and cleanup. Decking replacement and any structural repair get priced separately once exposed, so you see the change before we do the work. Compare this with a full Roofing in Sonoma scope if you’re also considering other roof types side by side.
See the difference
Before
After
Before
After
Before
AfterWhat Sonoma Homes Specifically Do to This Job
Sonoma is a wildfire-prone WUI county, and that changes what a metal roof is asked to do here. Class A fire ratings and ember-resistant venting aren’t optional features we upsell; they’re part of the assembly. Metal is one of the strongest answers to that requirement, which is a big part of why homeowners near the Plaza and out in the hills ask about it.
Downtown and near-Plaza buildings run to 19th-century adobe, Victorian and Edwardian stock, many with raised foundations and later additions. On these homes, permits can require City of Sonoma Historic Preservation Commission and design review before work moves, and we plan the schedule around that. Out past the city limits, wine-country estates on well-and-septic parcels bring their own logistics for staging and material delivery. If your project is part of a full Roofing scope, we coordinate it the same way across the Sonoma area.
Serving Sonoma, CA – Our Local Coverage Area
We serve Sonoma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Sonoma
Most homes take three to six working days from tear-off to final inspection. Larger or more complex roofs, or jobs that need decking repair or historic review, can run longer, and we’ll give you a realistic window in the estimate.
Yes, a re-roof permit is standard, and homes on or near the Plaza may also trigger historic preservation and design review. We pull the permits and handle the inspections so you’re not chasing the building department.
In most cases, yes. A metal roof replaces the roof covering and decking; it doesn’t require relocating plumbing or framing unless we find structural damage or you’re adding penetrations. Anything structural gets flagged and priced before we proceed.
Expect $15,000 to $40,000 for a full installation, depending on size, panel type and decking condition. Call (866) 320-2646 for an exact quote, and estimates are free.
Our installation is backed by the 730-Day Done Right Promise, and panel finishes carry manufacturer warranties. You’ll see both in writing before work starts. Homeowners often pair a roof project with Window Replacement in Sonoma or Impact Windows & Doors in Sonoma to shore up the building envelope at the same time.
Get a Free Metal Roofing Estimate in Sonoma
If you’re weighing metal against shingle or tile, the fastest way to a real number is an on-site look. Call (866) 320-2646 and we’ll schedule a free estimate: we inspect the roof, talk through standing seam versus through-fastened panels, and hand you a written line-item quote with upfront pricing. A live person answers, 24/7. No surprises, no pressure.
Written by the team at Groundwork Construction Co. of San Francisco.