Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterNew Construction vs. Replacement Windows in San Francisco: Which One Does Your House Actually Need?
Choose new-construction windows when your existing frame is rotted, out of square, or the building sits in an Article 10 or Article 11 historic district where design review demands a specific sash profile. Choose replacement (insert) windows only when the original frame is solid and the home is outside preservation review. In San Francisco, that second condition is rarer than most comparison guides admit. Call (866) 320-2646 and we’ll tell you which side of the line your address falls on before you spend a dollar.
The reason is straightforward. Nearly every page comparing these two products treats the decision as a cost-and-convenience question. Here it’s often a legal one first, a structural one second, and a budget one third.
The technical difference that matters on a 1910 Edwardian
New-construction windows carry a nailing fin around the perimeter. That fin fastens directly to the rough framing, which means the unit replaces the entire window assembly – frame, sill, jambs, and sash. The opening has to be exposed and squared first.
Replacement windows, often called inserts, drop inside the existing frame and fasten to it. No fin, no rough opening work, no exterior trim rebuild. Faster, cheaper, and perfectly appropriate when the frame underneath is sound.
That last clause is doing a lot of work in San Francisco. The city’s Victorian and Edwardian row houses have wood frames that have been absorbing marine fog for a century. We open up sills in the Sunset and the Richmond and find punky wood that crumbles under a screwdriver. Sometimes the jamb is soft from the sill up. An insert screwed into that substrate will rack, leak, and fail years before the window’s rated life is up. The window didn’t fail. The frame did.
Where San Francisco makes the standard comparison incomplete
Almost no comparison article mentions the third variable: neighborhood design review. In San Francisco it can override both cost and convenience.
Homes within Article 10 and Article 11 landmark districts, plus a long list of neighborhood conservation districts, face design review on exterior alterations. Window replacement counts. Reviewers commonly require that new units match the original sash profile – the divided-light pattern, the muntin dimensions, the depth of the reveal, the way the sash sits in the wall.
Off-the-shelf inserts rarely clear that bar. What clears it is a custom new-construction unit built to replicate the original profile. So a homeowner in a preservation district who assumed “replacement” was the correct path may find the planning process pushing them toward new-construction method anyway, with custom sash on top.
This is where product selection earns its keep. Andersen and Marvin both build new-construction units in profiles that can replicate historic double-hung proportions closely enough to clear design review without a variance fight. We specify those specifically for that reason. The right window here isn’t the cheapest one that fits the hole – it’s the one whose profile a planner will approve on the first pass.
Side-by-side: which method fits your situation
| Factor | New-construction window | Replacement (insert) window |
|---|---|---|
| Attaches to | Rough framing via nailing fin | Existing window frame |
| Requires | Frame exposed, opening squared, exterior trim rebuilt | Sound, square existing frame |
| Handles rotted sill or jamb | Yes – rot comes out with the old unit | No – rot stays and spreads |
| Historic district profile matching | Yes, with custom sash from Andersen or Marvin | Usually no |
| Typical San Francisco window replacement range | $5,310-$17,700 | $5,310-$17,700 |
| Impact-rated units, where specified | $9,440-$29,500 | Rarely applicable |
Notice the two middle columns land in the same price band. That’s the part homeowners find surprising. The method changes, not the ballpark – unless rot or a preservation requirement pushes the job into custom territory, at which point the number climbs toward the top of the range and sometimes beyond it. Upfront pricing means we put that number in writing before work starts.
What we check before quoting a window job in San Francisco
We inspect the rough opening before we quote. Not after the deposit, not after the crew arrives. Before. That inspection tells us three things that determine the method:
- Frame condition. Probe the sill and jamb at several points. Soft wood means the frame comes out, which means new-construction method.
- Square and plumb. Settlement in hillside homes is common. A racked opening won’t accept an insert cleanly.
- Preservation status. Which district the parcel sits in, and what the review body has accepted on comparable houses nearby.
That last check is a first-hand operator detail worth spelling out: we look at what has already been approved on neighboring houses in the same district. Precedent carries weight in design review, and it shortens the path considerably.
One more local note. On the west side, in the fog belt from the Outer Sunset through the Richmond, we spec stainless hardware and galvanized flashing on window jobs as a default. Standard fasteners and standard paint fail fast in salt air. It’s a small line item that buys years, and it’s the kind of thing that belongs in the estimate rather than in a conversation three winters later.
Common local scenarios we run into
A 1908 Edwardian in Noe Valley with soft sills. The homeowner wanted inserts to save money. Probing found rot running up the jamb on the south elevation, the side that takes the weather. New-construction method with full frame replacement was the honest answer. The insert would have been cheaper to quote and a worse decision.
A Richmond District row house outside any conservation district. Frames sound, openings square, no review requirement. Replacement inserts made sense here and still do. Not every job needs the heavier method, and we’ll say so.
A landmark-district home facing design review. The street’s original sash profile was the sticking point. We specified new-construction units in a matching profile and cleared review without a variance. The planning process, not the window, set the schedule.
A hillside home with a racked opening. Settlement had pulled the frame out of square by enough that no insert would seat properly. Full frame replacement was the only route to a weathertight result.
FAQs
New-construction windows are the better choice in San Francisco whenever the existing frame is rotted, out of square, or the home sits in a historic or conservation district with design review. Replacement inserts are the better choice when the frame is solid and no preservation review applies. The method should follow the condition of the opening, not the size of the quote. Call (866) 320-2646 for a free estimate and we’ll inspect the opening first.
Window replacement in San Francisco typically runs $5,310 to $17,700 depending on count, size, and method, with impact-rated units running $9,440 to $29,500 where specified. Custom sash to match a historic profile pushes toward the upper end. Upfront pricing means the number we write down is the number you pay, and estimates are free.
Yes, in most cases – window replacement is a permitted alteration in San Francisco, and homes in Article 10 or Article 11 districts or a neighborhood conservation district face design review on top of the permit. The review is where profile matching gets decided. We handle the paperwork and the submittal as part of the job, and we can tell you at the estimate stage whether your address triggers review.
Sometimes, but not usually on the street-facing elevations. Preservation review commonly requires units that match the original sash profile, which typically means custom new-construction windows rather than standard inserts. Rear and side elevations sometimes have more latitude. It depends on the district and on what has already been approved nearby, which is why we check precedent before quoting.
Talk to us before you decide
If you’d rather have it looked at than read about it, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco – call (866) 320-2646. We’ll probe the frames, check your district, and give you an upfront number for the method your house actually needs. Every project is backed by our 730-Day Done Right Promise, and a live person answers the phone around the clock.
For the full picture of what we install, see our Windows & Doors service, and browse the rest of our work from the home page or our San Francisco service area.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.