Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterPaver Driveways in San Francisco, CA
Paver driveways in San Francisco cost $22 to $45 per square foot installed, so a typical two-car driveway of roughly 400 square feet runs $8,800 to $18,000 depending on the material, base prep, and slope. Pavers are the right call when you want a surface that handles this city’s hills, fog drip, and heavy winter rain without cracking like poured concrete. We install and replace paver driveways across San Francisco with proper excavation, drainage, and compaction underneath, because on these lots the base does more work than the stone you see.
Most of the driveways we’re called out to in San Francisco are one of four things: cracked concrete that’s heaved at a seam, a slope that sheds water toward the garage, an old asphalt pad going soft at the edges, or dirt and gravel that turns to mud every January. Pavers solve all of those when they’re built on a real base. When they aren’t, you get the same heaving and settling you started with. The difference is entirely in what’s under the surface, and that’s where we spend our time.
Groundwork Construction Co. of San Francisco treats paver driveways as part of a full-scope exterior build, not a weekend patch job. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We answer the phone with a live person, 24/7, so you’re never stuck waiting until Monday to get a question answered. If you’re comparing options, start with our Driveway & Pavers in San Francisco service page for the full picture, then call (866) 320-2646 for a free estimate.
Key Takeaways
- Paver driveways in San Francisco run roughly $22 to $45 per square foot installed.
- Our technicians have up to 12 years of experience with base prep, grading, and paver installation.
- Permeable and grid pavers can help with stormwater drainage on tight San Francisco lots.
- Every paver driveway is backed by the 730-Day Done Right Promise and upfront pricing, no surprises.
- Free project estimate and design consult, plus 0% financing for 18 months and $1,000 off projects over $10,000.
When You Need Paver Driveways
Pavers aren’t right for every driveway, but when you see these problems, they usually are. Here’s what we run into across San Francisco neighborhoods.
- Your concrete has cracked and heaved at the seams. On sloping lots in Noe Valley and Bernal Heights, poured concrete develops cracks within a few years because it can’t flex. Pavers move with minor settling and stay intact.
- Rainwater pools against your garage or front stairs. A driveway that slopes the wrong way sends water into the foundation every winter. A proper paver install regrades the surface and routes water away.
- Your old asphalt or gravel pad has gone soft. Soft edges and ruts mean the base has failed or was never built right. Rebuilding with compacted aggregate base and pavers fixes it for good.
- You want curb appeal that matches your home. Clay and concrete pavers in warm tones suit the Edwardian and Victorian homes in the Sunset and Richmond far better than a plain gray slab.
- You’re dealing with stormwater rules on a narrow lot. Permeable pavers let water soak in instead of running to the street, which matters on tight lots where drainage is hard to manage.
- You need a driveway that can take heavy loads. If you park an EV, a truck, or an RV, a properly engineered paver base handles the weight without rutting.
If you’ve watched a crack grow for a couple of seasons, or the mud shows up every winter, it’s worth getting an honest read on the base before you resurface. Call (866) 320-2646 and we’ll take a look.
Our Paver Driveways Process
Every paver driveway we build follows the same sequence, whether it’s 300 square feet in the Mission or a long hillside run in Twin Peaks. The order matters more than the speed.
- Site walk and design consult. We measure the driveway, check existing slope, look at where water drains now, and talk through material options. This is free, and you leave with a plan and an upfront price.
- Permit check. San Francisco requires a permit for driveway work that touches the public right-of-way or changes curb cuts. We confirm what’s needed before a shovel hits the ground so nothing stalls mid-project.
- Excavation and base prep. We remove the old surface and dig down deep enough for a proper aggregate base. On San Francisco’s clay-heavy soils, base depth and compaction are the make-or-break step.
- Grading and drainage. We set the slope so water moves off the driveway and away from the house, and install edge restraints so the pavers can’t spread over time.
- Paver installation and compaction. Pavers go down in the pattern you chose, then get compacted and swept with joint sand. We use quality pavers from partners like Belgard, so the surface holds up to foot traffic, tires, and weather.
- Final walkthrough. We walk the finished driveway with you, confirm the grade and drainage, and hand over care instructions. If anything’s off in the first two years, the 730-Day Done Right Promise covers it.
We also handle the parts people forget: trimming the garage apron, resetting a gate that no longer swings after the grade changes, and making sure the new driveway ties cleanly into steps or a walkway. From foundation to finish line, one crew owns the whole job.
For the broader category and related work like installing a matching front walk or repairing a sunken pad, see our Driveway & Pavers service page.
Paver Driveways Pricing in San Francisco
Paver driveway pricing here comes down to square footage, material, base conditions, and access. We give you a firm number upfront, and the price you see is the price you pay. No surprise line items after the crew shows up.
| Line item | Typical San Francisco range |
|---|---|
| Concrete pavers, installed | $22 – $32 per sq ft |
| Clay or premium stone pavers, installed | $30 – $45 per sq ft |
| Permeable paver system | $28 – $42 per sq ft |
| Old surface removal and haul-away | $800 – $2,500 |
| Base rebuild and grading (sloped or clay-heavy lots) | $1,500 – $6,000 |
| Drainage corrections and edge restraints | $600 – $2,000 |
| Permit fees (right-of-way work) | Varies by scope, quoted upfront |
Using those numbers, a basic 400-square-foot concrete paver driveway in San Francisco lands around $9,000 to $13,000. A premium clay or stone driveway on a steep lot with a base rebuild can run $18,000 to $25,000. The wide spread is real, and it’s driven by the lot, not by upselling.
What affects the cost
- Square footage. The single biggest factor. A one-car pad costs far less than a long two-car drive.
- Slope and grading. Steep driveways in areas like Diamond Heights and Twin Peaks need more base work and retaining detail to hold the pavers in place.
- Base condition. If the existing base is sound, we resurface. If it’s failed, it has to be rebuilt, and that’s the biggest variable in most quotes.
- Material. Concrete pavers cost less than clay brick or natural stone, but both wear well on a driveway.
- Access. Narrow side yards and tight street parking mean more hand-carry and longer labor, which shows up in the price.
- Drainage. A lot that needs a French drain or a new catch basin adds cost, but it protects the driveway and the foundation behind it.
We back the pricing with 0% financing for 18 months and $1,000 off projects over $10,000, so a full paver driveway is easier to fit into a real budget. Combine that with the free project estimate and design consult and you can see the exact number before you commit. Call (866) 320-2646 to schedule yours.
FAQs – Paver Driveways
How much does a paver driveway cost in San Francisco?
A paver driveway in San Francisco runs about $22 to $45 per square foot installed, or roughly $8,800 to $18,000 for a typical 400-square-foot driveway. Material, slope, base condition, and access drive the final number. Call (866) 320-2646 for an exact quote, estimates are free.
Can pavers handle San Francisco’s hills and rain?
Yes, when the base and grading are built correctly. Pavers flex with minor ground movement and shed water well when the surface slopes away from the house, which is why they hold up better than poured concrete on our hilly, clay-heavy lots. The install quality is what makes the difference.
Do I need a permit for a paver driveway in San Francisco?
You need a permit if the work touches the public right-of-way, changes a curb cut, or alters stormwater drainage to the street. Interior driveway resurfacing that stays on your property usually doesn’t. We check the requirements for your specific lot before we start and handle the paperwork with you.
Is it cheaper to repair my driveway or replace it with pavers?
Patching a crack or resurfacing a small area is cheaper in the short term, but when the base has failed or the slab is heaving, repair money gets spent twice. A paver replacement with a proper base is the better long-term value on a driveway that’s failing. Call (866) 320-2646 and we’ll tell you honestly which one your driveway needs.
How long does a paver driveway installation take?
Most residential paver driveways take three to six working days, depending on square footage, base work, and weather. A straight resurface over a sound base is faster; a full tear-out and rebuild on a steep lot takes longer.
Can you start my paver driveway soon?
Often, yes. We answer the phone with a live person 24/7, so we can get your estimate scheduled quickly and give you a real start date. Call (866) 320-2646 and we’ll find the soonest opening.
Get Your Free Paver Driveway Estimate
If your San Francisco driveway is cracked, pooling water, or just overdue for an upgrade, the next step is a straight answer and a firm price. Call (866) 320-2646 for a free project estimate and design consult. Our technicians have up to 12 years of experience, they arrive background-checked and in uniform, and every paver driveway we build is covered by the 730-Day Done Right Promise and upfront pricing, no surprises. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available, and a live person picks up around the clock. We’ll show you what’s under the surface and build it to last, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.