Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Daly City, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Daly City typically runs $3,500 – $10,000 and takes 5 to 10 working days once materials are on site. The job means removing the tub and its surround, reworking the drain and valve to shower height, waterproofing the walls and floor, setting a new shower pan or tiled base, and hanging glass. One honest caveat before you go further: if the framing behind that tub has been drinking fog for decades, the number and the calendar both move. Call (866) 320-2646 for a free on-site estimate and we’ll tell you which version of this job you actually have.
How the Conversion Runs, Day by Day
Most contractors will quote you a single number and a vague two-week window. Here’s the actual sequence, so you know what you’re paying for and when you’ll be making decisions.
Stage 1: Demolition and opening the wall (day 1)
We pull the tub, surround, and any existing tile or fiberglass panel down to the studs. This is the day that surprises people, and it’s the day we want to find surprises: in Daly City’s older stucco homes, tub walls frequently hide rotted studs, failed greenboard, and old galvanized drain lines. We photograph everything and show you before anything gets covered back up. You decide at this point whether we stop and quote the repair or proceed with the original scope.
Stage 2: Rough plumbing and framing corrections (day 2 – 3)
The drain gets re-set from tub height to shower height, the valve moves up to roughly 40 – 48 inches, and any rotten framing gets sistered or replaced. If the valve is on a shared wall with the hallway, this is where blocking and access get figured out. You’ve already chosen your valve trim by now, because the rough-in height depends on it.
Stage 3: Inspection (day 3 – 5, schedule dependent)
Rough plumbing and any structural corrections are inspected before walls close. This is a real scheduling variable in Daly City, and we build it into the timeline rather than pretending it doesn’t exist.
Stage 4: Waterproofing and tile (day 5 – 8)
We install a bonded waterproofing membrane or a troweled liquid system on the walls and a sloped, waterproofed pan at the floor. Tile or a solid-surface panel goes on top. Cure time between waterproofing and tile is not something we shorten to look fast. Your decisions here: tile size (large-format hides fewer flaws and needs fewer grout lines; smaller mosaics handle a sloped pan better), grout type, and niche placement.
Stage 5: Glass, trim, and final walk (day 8 – 10)
Shower door, trim kit, drain cover, and any grab bars go in. We test for leaks, walk the job with you, and leave you with the manufacturer paperwork on the valve. The full-glass install is often the single biggest visual payoff of the whole job, and it’s the last thing to land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Every tub-to-shower conversion comes down to about five real decisions. Here’s the honest trade-off on each.
- Prefab pan vs. tiled base. A prefab acrylic or composite pan is faster to install, cheaper, and easy to clean, but it limits you to stock sizes and looks like a prefab pan. A tiled base on a waterproofed pan looks seamless and lets you match the walls, but adds roughly $800 – $1,800 and a couple of days. Pick the pan if budget and speed lead; pick tile if the shower is visible from the bedroom door.
- Acrylic surround vs. full tile. Acrylic surrounds are the low end of the range and hold up well for a rental or a quick flip. Full porcelain or ceramic tile costs more and takes real labor hours, but it’s what buyers in Daly City’s $900K-plus housing stock expect to see.
- Valve and trim brand. A Sterling or Grohe valve and trim set is the sensible middle: rebuildable cartridges, parts still on the shelf in ten years. Builder-grade valves fail first and are the reason a lot of these conversions get started in the first place.
- Glass configuration. A framed pivot door is the cheapest; a frameless fixed panel with a hinged door costs more but is what makes the conversion feel like an upgrade instead of a swap.
- Built-in seat or niche. A corner seat or recessed niche adds $300 – $900 in framing and waterproofing labor. Worth it if anyone in the house is over 60 or if you’re storing a dozen product bottles.
What Tub-to-Shower Conversion Costs in Daly City, CA
For a Daly City tub-to-shower conversion, plan on $3,500 to $10,000. The low end is a stock acrylic pan and surround in a sound, plumb, square alcove with no rot and no plumbing relocation. The high end is a tiled base, tile walls, a frameless glass panel, a new valve, and a wall opened up to fix rotted framing.
Five things push the number up or hold it down:
- Alcove condition. Rot, failed waterproofing, or out-of-square framing behind the tub is the most common adder we see, and it’s the one nobody can price until the wall is open.
- Plumbing and electrical relocation. Moving the drain or valve within the same wall cavity is minor. Moving it to a different wall is a different job.
- Material grade. Acrylic to full tile is roughly a 2x swing in material and labor.
- Permit scope. A straight fixture swap may not require a permit; a drain relocation and new valve usually does. We’ll tell you which bucket your job falls into before you sign anything.
- Glass. Framed pivot up to frameless panel is a $600 – $1,500 spread on its own.
Your written estimate will be line-item: demo, rough plumbing, inspection, waterproofing, tile, glass, fixtures, and cleanup, each priced separately. Fixed pricing with no change orders, and if we open a wall and find something we didn’t quote, you get a photo and a number before anyone touches it. Anything we find mid-job gets quoted, not absorbed into a surprise invoice.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City’s housing stock is mostly 1940s – 1960s single-family stucco homes on wood frame, and that era of bathroom is exactly where this conversion gets interesting. The original tub alcoves were often built tight against exterior walls with minimal waterproofing and a layer of greenboard that has been quietly failing for years. Combine that with persistent fog and wind-driven rain, and you get studs that are soft at the base, a bottom plate that’s rotted through, and a drain line that’s been weeping into the framing for a decade.
On the steep streets off Mission and around Westlake, we also run into the hillside factor: unpermitted garage conversions below the bathroom, original redwood deck framing, and prior remodels done without inspection. Before we close up a shower wall that sits over one of those spaces, the structure and any legalization issues get sorted first. Tight lots are their own puzzle here. Neighbors’ walls are often only feet from your bathroom window, which changes how we stage materials and where the dumpster sits. That’s the reason we do a site visit before quoting rather than pricing from a photo. If the conversion is part of a bigger scope, our Bathroom Remodeling in Daly City page covers the wider project, and you can see our full Bathroom Remodeling service if you’re still deciding how far to go. We also cover the whole of Daly City and the surrounding Peninsula, and homeowners often pair this work with exterior jobs like Metal Roofing in Daly City or Tile Roofing in Daly City when storm-season moisture has done damage on both ends of the house.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Daly City
Plan on 5 to 10 working days from demo to final walk, with inspection scheduling and material lead times as the usual variables. A stock acrylic conversion can land near the short end; a tiled base with frameless glass sits at the long end. Call (866) 320-2646 for a firm schedule after we’ve seen the alcove.
Often yes, if the drain is relocated or the shower valve is replaced, and the inspection happens before walls close. A pure fixture swap in the same footprint sometimes escapes the permit requirement. We handle the determination and the paperwork, and we don’t start demo until the permit status is clear.
Yes, in the majority of cases the drain and valve stay in the same wall cavity and only the height changes. The exception is a rot find behind the tub, or a valve wall that turns out to be shared with a hallway closet. We won’t know for certain until the surround comes down, and we show you before we quote the difference.
The range is $3,500 to $10,000, and the number is set mainly by tile vs. acrylic, glass type, and whether rotted framing turns up behind the tub. Estimates are free and line-item, so you can see exactly what each piece costs. Call (866) 320-2646 for an exact quote.
Every conversion is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not the fixture finish you selected, and the manufacturer’s own warranty on the valve and trim runs alongside it. We hand over the paperwork at the final walk.
Get a Free Tub-to-Shower Conversion Estimate in Daly City
Call (866) 320-2646 and a live person picks up, day or night. We’ll set a free on-site estimate, look at the alcove, check what’s behind the surround, and hand you a written line-item quote with fixed pricing. If you’re weighing a bigger scope, the free design consult covers that too. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.