Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Sonoma, CA: What the Job Costs and How Long It Takes
Replacing a vanity, re-tiling a floor or shower surround, and swapping out faucets, mirrors, and lighting in Sonoma typically runs $9,000 – $28,000 for a full bath’s worth of finish work, or $800 – $3,000 for a vanity alone, and takes two to four weeks of on-site work. Vanities, Tile & Fixtures work is the visible half of a bathroom: the cabinets, stone, tile, and plumbing trim that make the room feel finished. Call (866) 320-2646 and we’ll walk your space and give you a written, itemized estimate.
How the work actually runs, stage by stage
Finish work looks simple until you’re three days in and the subfloor turns out to be 1920s dimensional lumber that’s crowned an inch out of level. Here’s the real sequence we follow on a Sonoma vanity, tile, and fixture job.
Stage 1: Demo and discovery (1 – 2 days)
We pull the old vanity, tear out the tile and backer, and lift the toilet if the floor’s being redone. This is where we find out what’s under the finishes – rotted subfloor, old galvanized supply lines, knob-and-tube wiring feeding the vanity light. You approve any surprise scope before we move past demo. Nothing gets hidden behind new tile without a decision from you first.
Stage 2: Rough-in and substrate (2 – 3 days)
If you’re relocating the vanity or adding a second sink, the plumber and electrician rough in new supply, drain, and GFCI circuits now, and the rough inspection happens before anything closes up. Then we install cement backer board or a waterproof membrane in the wet zone, float the floor to level, and set the drain. You’re choosing tile layout and grout color at this point, because the substrate dictates what’s possible.
Stage 3: Tile setting (3 – 5 days)
Floor tile goes down first, then wall tile, then the shower surround. Large-format porcelain moves faster than a mosaic with a thousand grout lines, and a herringbone or picket pattern adds a day or two of layout and cutting. Grout and sealer cure before any fixtures go back on.
Stage 4: Vanity and fixture install (1 – 2 days)
The vanity cabinet gets set and shimmed level, the countertop and sink drop in, and the faucet, drain, mirror, sconces, and exhaust fan go in. This is the day the room finally looks like a bathroom again.
Stage 5: Punch list and final inspection (1 day)
We caulk, touch up paint, test every fixture for leaks, and walk the room with you. The final inspection closes out the permit if one was pulled. You sign off on a finished room, not a maybe.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the decisions on a job like this come down to five categories. Here’s the honest trade-off on each.
- Vanity cabinet: A stock big-box vanity is the cheapest route ($400 – $900) but rarely fits odd walls in older homes. Semi-custom (KraftMaid and similar lines) lets you match the room’s dimensions and finish for $1,200 – $2,500. Furniture-style vanities look great in a Victorian or Edwardian bath but cost more and offer less storage.
- Countertop: Quartz (Cambria, for example) is non-porous and needs no sealing, at $60 – $120 per square foot. Granite is beautiful but needs periodic sealing. A cultured marble top is the budget pick at $300 – $700 installed.
- Tile: Porcelain is durable, water-resistant, and runs $4 – $12 per square foot for material. Natural stone like marble or travertine runs $10 – $30+ and needs sealing. Ceramic is the value option but chips more easily in a wet zone.
- Fixtures and finish: Kohler and similar mid-tier brands cost more up front but hold up and carry replacement parts. Builder-grade faucets save now and get replaced in five years.
- Shower enclosure: Frameless glass looks cleanest; a framed unit or a simple curtain rod costs far less.
What Vanities, Tile & Fixtures costs in Sonoma, CA
A full vanity, tile, and fixture refresh in Sonoma runs $9,000 – $28,000. A vanity-only swap is $800 – $3,000, a small bath finish package is $5,000 – $12,000, and a walk-in shower tile and glass job lands in the $4,500 – $12,000 range. Here’s what pushes a job to the low or high end:
- Size of the room: a 5×8 hall bath costs less in tile and material than a primary bath with a double vanity.
- Existing condition: rotted subfloor or failing supply lines add demo and repair days.
- Relocating plumbing or electrical: moving the vanity drain or adding a circuit is real money and may trigger a permit.
- Material grade: porcelain and a stock vanity vs. marble and semi-custom cabinetry swings the number thousands.
- Permit scope: cosmetic tile and a vanity swap often need no permit; moving plumbing or adding a shower does.
A written, itemized estimate from us includes demo, substrate, tile setting, cabinet and counter install, fixture install, and cleanup. It typically does not include structural repair found mid-demo or a full layout redesign – we flag those before work starts so there are no change orders. Pricing is upfront: the number you see is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Sonoma homes specifically do to this job
Sonoma’s housing stock makes finish work less predictable than a suburban tract job. Downtown and near-Plaza homes run to 19th-century adobe, Victorian, and Edwardian buildings, many on raised foundations with unpermitted later additions – so a vanity that looks like a simple swap can expose out-of-square walls and a floor that needs sistering. Those buildings also sit inside the 1968-designated Sonoma Plaza historic district, where design review through the City of Sonoma Historic Preservation Commission can add weeks before a permit moves, and where pulling tile off a wall sometimes reveals original adobe or early framing that triggers a stop-and-redesign. Out past the city limits, wine-country estates on wells and septic systems bring their own constraints, and the clay soils on the Sonoma Valley floor heave seasonally, so floor tile over a shifting slab gets a crack-isolation membrane, not a direct bond. We work all of this into the estimate up front – and if you’re pairing it with exterior work, homeowners often combine interior tile with Tile Roofing in Sonoma or Specialty Roofing in Sonoma while trades are already scheduled. This job is also a natural add-on if you’re already planning a Bathroom Remodeling in Sonoma.
Serving Sonoma, CA – Our Local Coverage Area
We serve Sonoma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Vanities, Tile & Fixtures in Sonoma
Most take two to four weeks of on-site work, with historic-district review adding lead time before we start. Call (866) 320-2646 for a schedule specific to your project.
Cosmetic tile and a straight vanity swap usually don’t, but moving plumbing, adding a shower, or relocating electrical does – and near the Plaza, historic preservation review can apply. We pull the permits and handle inspections so that side stays off your plate.
Yes, in many cases. Keeping the drain and supply where they are cuts cost and timeline significantly; we’ll tell you honestly whether the existing layout can stay.
Full finish packages run $9,000 – $28,000; a vanity alone is $800 – $3,000. Call (866) 320-2646 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians bring up to 12 years of experience, arrive background-checked and in uniform.
Get a free estimate for Vanities, Tile & Fixtures in Sonoma
Tell us what you’re picturing and we’ll come measure, walk the room, and hand you a written, line-item estimate for your Vanities, Tile & Fixtures project. We answer the phone with a live person, 24/7, and we handle permits where they’re required. We also serve the surrounding towns including Sonoma and the wider valley. Call (866) 320-2646 to schedule – no hype, no pressure, just a real number you can plan around.
Written by the team at Groundwork Construction Co.