Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in San Anselmo, CA: What It Costs and How Long It Takes
A vinyl fence in San Anselmo typically runs $3,500 to $9,000 for most residential lots, and most jobs are finished in two to four working days once materials land. That number covers demolition of the old fence, post holes set in concrete, panels, gates, and cleanup. Call (866) 320-2646 and we’ll walk your property line, talk through height and style, and put the range in writing before anyone touches a shovel.
Vinyl makes particular sense here because San Anselmo’s wet winters are hard on wood and the town’s older lots rarely have straight, level fence lines. Vinyl shrugs off the rain, doesn’t rot at the post base, and doesn’t need repainting every few years.
Key Takeaways
- Most San Anselmo vinyl fence projects land between $3,500 and $9,000.
- Plan on two to four working days on site, weather permitting.
- Fence height and location near a property line drive most of the cost swing.
- We pull permits where they’re required and price the job upfront, no surprises.
How a Vinyl Fence Job Actually Runs, Stage by Stage
There’s a real sequence to this, and knowing it helps you plan around it. Here’s how the work unfolds.
Stage 1: On-site measure and layout (day of estimate, about 45 minutes)
We walk the property line with you, mark corners, and check for anything buried where posts will go: irrigation lines, old footings, low-voltage lighting. On San Anselmo’s older flats, we sometimes find remnants of previous fences or drainage that nobody remembered. You decide fence height, style, and gate placement during this visit.
Stage 2: Permit check and material order (one to two weeks)
Most residential fences under six feet don’t need a permit, but plenty of San Anselmo lots sit where a fence does trigger review, and we confirm that before ordering anything. Once the scope is set, we order panels, posts, and gates in your chosen color and style. Lead time on standard colors is usually a week; special-order colors can run longer.
Stage 3: Demolition and post setting (day one on site)
The old fence comes out, and we haul it away. Posts get set in concrete and need to cure before panels go up, which is why day one is mostly digging and setting. This is the messiest part of the job.
Stage 4: Panels, gates, and trim (days two to three)
With posts cured, panels hang fast. Gates get mounted and adjusted so they swing clean and latch true. We check every section for level and plumb as we go.
Stage 5: Final walkthrough and cleanup
We walk the finished fence with you, point out anything worth watching, and clean the site. Any adjustment you want gets handled before we leave. The work is covered by our 730-Day Done Right Promise: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on a Vinyl Fence
Vinyl isn’t one product. The decisions below are where the money and the longevity live.
- Panel style: Privacy (solid, tongue-and-groove pickets) is the most common choice for a backyard in San Anselmo. Picket or semi-privacy runs less and looks lighter. Full privacy costs more per linear foot but gives you the screening most homeowners actually want.
- Height: Four, five, or six feet. Six-foot privacy is standard for yards; anything taller may need a permit or a neighbor conversation near a shared line.
- Color and finish: White is the cheapest and most available. Tan, gray, and woodgrain finishes cost more and hide dust better. Woodgrain-textured vinyl reads warmer against a Craftsman or bungalow exterior.
- Post style and reinforcement: Standard posts are fine for most runs. Longer spans or windy, exposed hillside lots benefit from steel-reinforced posts, which add cost but prevent sag.
- Gates: A single walk gate is standard. Double drive gates and self-closing hardware add cost but solve a real access problem.
We stay brand-agnostic on vinyl and match the product to your lot, not the other way around. Where a project touches a broader scope, it’s often part of a full Fence Installation in San Anselmo plan that includes gates, a short return run, or landscaping tie-in.
What a Vinyl Fence Costs in San Anselmo, CA
For a typical residential lot, a vinyl fence in San Anselmo runs $3,500 to $9,000. Here’s roughly how that breaks down:
| Line item | Typical range |
|---|---|
| Privacy vinyl, up to 150 linear ft installed | $3,500 – $7,500 |
| Add a walk gate | $350 – $800 |
| Add a double drive gate | $900 – $2,000 |
| Steel-reinforced posts (exposed lots) | $200 – $600 |
| Old fence removal and haul-away | Included in most written quotes |
What pushes a job toward the high end: total linear feet, sloped or uneven ground that needs stepping, rock or old concrete in the post holes, and special-order colors. What keeps it low: a short, straight run, standard white panels, and easy digging. Our written estimate lists every line, and the number you see is the number you pay.
Not in the estimate unless we call it out: fence staining or sealing (vinyl doesn’t need it), landscaping repair around disturbed beds, and any structural work if a post hole hits something unexpected. When that happens, we stop and talk to you before adding a dollar.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo Homes Specifically Do to This Job
San Anselmo’s lot geography shapes fence work in ways that don’t come up in flat inland towns. The town’s core sits on the flood-prone alluvial flat along San Anselmo Creek, where wet winters and a high water table mean post holes on the flats east of Sir Francis Drake Boulevard can fill with groundwater. We set posts deeper and use post-mix concrete rather than dry-set on those lots, and on a few properties near the creek we’ve had to bail holes before pouring. Fence lines near the creek can also trigger county floodplain review, so we check setbacks before ordering materials.
Up the slopes toward Sleepy Hollow and the Ross border, the housing stock is mid-century and later, and yards step with the grade. Vinyl on a hillside run needs stepped panels and posts racked to the slope; a fence that’s dead level looks wrong and fails faster. The older Craftsman and bungalow homes in the flats sit on pier-and-post foundations with tight, established lots, so post spacing and gate swing get planned carefully to avoid the house and existing hardscape.
We cover all of San Anselmo, ZIP codes 94960 and 94979, and our San Anselmo service page maps the wider coverage area. If your fence line borders a driveway or patio that needs work, homeowners often pair this with Driveway Repair & Replacement in San Anselmo or Asphalt Driveways & Resurfacing in San Anselmo to handle the whole exterior in one pass.
For clay soils and winter storms that saturate the flats, our Fence Installation service uses materials and post-setting methods tuned to Marin’s wet-season and dry-season swing.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vinyl Fence in San Anselmo
Most San Anselmo jobs run two to four working days on site, plus one to two weeks of material lead time before we start. Small, straight runs can be done in two days; hillside or stepped fences with gates take closer to four. Winter rain can pause work for a day or two while posts cure.
Most fences under six feet on a standard interior lot don’t need a permit, but lots near San Anselmo Creek or on a shared property line sometimes do. We check before ordering materials and handle the paperwork where it applies. Call (866) 320-2646 and we’ll confirm what your lot needs on the site visit.
In most cases, yes. We hand-dig post holes where beds, irrigation, or hardscape are close, and we protect plantings with drop cloths. Some disruption along the fence line is unavoidable, but we keep it tight and clean up when we’re done.
Expect $3,500 to $9,000 for a typical residential vinyl fence in San Anselmo, with most jobs landing in that range. Linear footage, slope, gate count, and color drive the swing. Call (866) 320-2646 for an exact quote; the estimate is free and written line by line.
Every vinyl fence we install is backed by our 730-Day Done Right Promise: if something isn’t done right, we make it right. That guarantee covers our workmanship, and the vinyl product itself carries the manufacturer’s warranty on materials.
Get a Free Vinyl Fence Estimate in San Anselmo
Call (866) 320-2646 for a free on-site estimate on your vinyl fence in San Anselmo. A live person answers any hour. We walk your property, talk through styles and heights, and leave you with a written, line-item number you can compare against anyone else’s bid. Our technicians have up to 12 years of experience, and every project carries the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.