Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Tamalpais-Homestead Valley, CA
A walk-in shower remodel in Tamalpais-Homestead Valley typically runs $9,000 – $28,000, with the shower build itself landing in the $4,500 – $12,000 range. Most jobs take 2 – 4 weeks from demo to final walkthrough, and the biggest single variable is what we find behind the existing tile on these older hillside homes. Call (866) 320-2646 to schedule a free on-site estimate.
How a walk-in shower remodel actually runs, stage by stage
Hillside work in Homestead Valley doesn’t move on a flat residential schedule. Steep lots, narrow private lanes, and older post-and-beam framing all show up on day one, so here’s the sequence we follow and roughly how long each stage takes.
Stage 1: Site assessment and demo (days 1 – 2)
We walk the bathroom, confirm the drain location and slope, and check the subfloor and framing before cutting anything. Then we remove the old tile, tub, or shower pan. On homes tucked under the redwoods, demo often turns up rot in the subfloor or moisture behind the backer board. You decide then and there: patch and replace like-for-like, or upgrade to a proper waterproofing membrane system.
Stage 2: Plumbing and structural prep (days 3 – 4)
If the drain is staying where it is, this stage is fast. Relocating the drain, moving a valve, or framing out a new niche adds a day or two. You pick the drain style (linear or center), the valve and trim brand, and whether the entry is a curb or curbless. Curbless needs a recessed floor and careful slope, so it costs more and often triggers a framing adjustment.
Stage 3: Waterproofing and backer (days 5 – 6)
This is where a walk-in shower survives or fails. We install the waterproofing membrane and pre-slope and get the pan water-tight before any tile goes down. On north-facing hillside homes that stay damp, this stage matters even more than usual.
Stage 4: Tile, stone, and finish (days 7 – 10)
You choose tile size, glass, and hardware. Large-format porcelain or slab panels go up faster and clean easier; small mosaics on the floor give grip. We set, grout, and seal, then let it cure before trim.
Stage 5: Glass, fixtures, and final walkthrough (days 11 – 14+)
Glass enclosures, shower heads, and trim go in near the end of the job. We test the drain and slope, water-test the pan, confirm the County of Marin inspection passes, and walk you through the finished shower. Some frameless glass orders add a few days for fabrication.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for a walk-in shower
The finish decisions do most of the visual work, but the spec choices underneath are what decide how long the shower lasts. Here’s what we walk through with you.
- Curbless vs. curbed entry – Curbless looks clean and works for aging-in-place, but needs a recessed floor pan, adds $1,500 – $3,000, and often means framing changes. A low curb costs less and drains easier on a slope.
- Tile grade – Porcelain and ceramic hold up best against the damp. Natural stone looks richer but needs sealing and holds moisture. Large-format tile means fewer grout lines to mildew in shaded homes.
- Waterproofing system – A bonded membrane or a liquid-applied system over cement board beats a glued-up plastic liner every time on these wet, shaded vales. This is the choice we push hardest.
- Glass – Frameless glass costs more ($1,200 – $2,800) but opens up a small shower. A framed or semi-frameless panel does the job for less. We can spec Mr-Glass or ViewLux for the panels.
- Fixtures – A thermostatic valve with a rain head and hand sprayer is the practical pick. Kohler and similar brands give you parts you can actually get years from now.
- Bench and niche – A built-in bench adds framing and costs from a few hundred to a couple thousand. A niche adds little and pays off daily.
What Walk-In Showers & Shower Remodeling costs in Tamalpais-Homestead Valley, CA
Plan on $9,000 – $28,000 for a full walk-in shower remodel here, with the shower itself running $4,500 – $12,000. Here’s the line-item breakdown we use in our written estimates.
| Line item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (existing pan reused) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full bathroom remodel (if the shower is part of the whole room) | $9,000 – $28,000 |
Five things push a Tamalpais-Homestead Valley job toward the low or high end:
- Size and layout – A compact 3×4 shower sits at the low end; a 5×6 with a bench and double niche climbs fast.
- Existing condition – Rot, a failed pan, or a bad prior remodel means repair before the new build.
- Plumbing and electrical moves – Relocating the drain or adding a heated exhaust vent adds cost and a permit.
- Material grade – Porcelain and a basic valve are the budget path; slab, stone, and frameless glass are the top.
- Permit and inspection scope – A plumbing change or structural framing draws a County of Marin permit and an inspection.
A written estimate covers demo, waterproofing, tile, glass, fixtures, permit pulls, and cleanup. It usually excludes structural repairs, mold remediation, and any framing needed for a curbless conversion, which we quote separately once we open the wall.
See the difference
Before
After
Before
After
Before
AfterWhat Tamalpais-Homestead Valley homes do to a shower remodel
Nearly every project here is hillside construction, and that changes the shower job before we set a tile. Permits go through the County of Marin, not a city, because Tamalpais-Homestead Valley is unincorporated. The narrow, winding private lanes off the valley floor set how we stage a job and how delivery trucks get in. The housing stock is a dense mix of mid-century redwood-and-glass homes, older cottages, and 1950s – 70s post-and-beam houses with decades of additions and decks, so shower walls and pans often turn up framing that has moved with the slope. Under the redwoods on the north-facing slopes, showers stay damp and shaded, so we see more mildew, failed caulk, and subfloor rot there than on the sunny side. Defensible-space and fire-hardening rules on the surrounding wildland-urban interface don’t touch the shower itself, but they shape what else gets done once a homeowner opens the walls. When the shower is part of a wider plan, it’s often folded into Bathroom Remodeling in Tamalpais-Homestead Valley, and if the remodeled bath adds plumbing and venting under a tired roof, homeowners often pair this with Roof Replacement & Installation in Tamalpais-Homestead Valley or, on fire-hardened hillside homes, Metal Roofing in Tamalpais-Homestead Valley. We handle Walk-In Showers & Shower Remodeling throughout the 94941 ZIP. If you’re considering the wider scope too, see our Bathroom Remodeling overview or the full Tamalpais-Homestead Valley service area.
Serving Tamalpais-Homestead Valley, CA – Our Local Coverage Area
We serve Tamalpais-Homestead Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Tamalpais-Homestead Valley
Most jobs run 2 – 4 weeks from demo to final walkthrough. Frameless glass fabrication and any framing repairs on hillside homes are the two things that stretch it, and a full Bathroom Remodeling in Tamalpais-Homestead Valley scope takes longer. Call (866) 320-2646 for a timeline specific to your bath.
Yes, if the plumbing, drain, or framing moves. Replacing tile over the same shower pan usually doesn’t require a permit, but a tub-to-shower conversion or a relocated drain does, and it’s pulled through the County of Marin. Groundwork pulls the permits and coordinates the inspection so you’re not chasing it yourself. Call (866) 320-2646 to talk through your scope.
Usually yes. If the drain stays put, we build the new pan and walls around it, which keeps the price closer to the low end of $4,500 – $12,000 and avoids a plumbing permit. A curbless conversion or a moved drain is where it gets more involved. Call (866) 320-2646 for an exact quote, and remember estimates are free.
Most homeowners here spend $9,000 – $28,000 for a full walk-in shower remodel, with the shower build itself running $4,500 – $12,000. Rot repair, curbless framing, and stone or frameless glass are what push a job to the top of that range. Call (866) 320-2646 for a written, line-item estimate at no cost.
Every shower we build is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right. Call (866) 320-2646 to get your free estimate scheduled.
Get a free estimate for Walk-In Showers & Shower Remodeling in Tamalpais-Homestead Valley
Call (866) 320-2646 for a free on-site estimate on your walk-in shower remodel in Tamalpais-Homestead Valley. A live person answers around the clock, no voicemail. We’ll look at the existing shower, talk through curbless versus curbed and your tile and glass choices, and hand you a written, line-item price that doesn’t change once work starts. Our technicians bring up to 12 years of experience, and you’ll get the 730-Day Done Right Promise in writing.
Written by the team at Groundwork Construction Co.