Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Larkspur, CA: What to Expect
Window Installation in Larkspur typically runs $4,500 – $15,000 for a whole-house replacement, and most single-window or small-batch jobs finish in a day or two once materials are on site. The work involves removing the old unit, checking and repairing the rough opening and framing, flashing and sealing the perimeter against our wet-winter weather, setting and shimming the new window, insulating the gaps, and trimming out both sides. Call (866) 320-2646 for a free on-site estimate.
How Our Team Handles Window Installation, Step by Step
Every window job follows a sequence, and knowing it tells you what to expect on your driveway each morning and which decisions land on you versus us.
Stage 1: Measure and site walk (about 60 – 90 minutes)
A technician measures every opening, checks the existing frames for rot, settles, and out-of-square conditions, and photographs anything that will change the scope. You confirm which windows are in play and whether you’re matching an existing style or changing the look. This is also where we flag whether any opening needs structural or trim work beyond a straight swap.
Stage 2: Order, permit, and lead time (2 – 5 weeks)
We finalize the spec sheet, place the order, and pull the permit if the job requires one. You sign off on the written line-item quote before anything is ordered. Lead times depend on the manufacturer and whether the units are stock or custom-sized, so this is the part of the schedule that moves most.
Stage 3: Day-one demo and prep (roughly 2 – 4 hours per window)
We lay drop cloths, remove the old sash and frame, and inspect the rough opening. Any rot in the sill or framing gets addressed before a new unit goes in. Flashing and weather barrier go in at this stage, which matters more in Larkspur than in drier markets.
Stage 4: Set, seal, and trim (the bulk of the work)
The new window is shimmed plumb and square, fastened, insulated at the perimeter, and sealed. Interior and exterior trim are installed and finished to match. A single window is a half-day; a batch of six to eight is a two-to-three-day job for a full crew.
Stage 5: Final inspection and walkthrough (30 – 45 minutes)
We operate every unit, check the locks and screens, verify drainage, and walk you through the finished work. If a permit was pulled, the inspection is scheduled and passed before we close out. The whole job sits under our 730-Day Done Right Promise, so anything that isn’t right gets made right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make for Window Installation
The spec sheet is where the money and the long-term performance get decided. Here’s what most Larkspur homeowners weigh.
- Frame material: vinyl is the value pick and holds up well in our mild climate; fiberglass and aluminum-clad wood cost more but take paint and stain and suit older homes where the profile is visible from the street. Andersen and Marvin both make strong options here.
- Glass package: dual-pane with low-E and argon is the sensible default for our climate. Tinted or laminated glass costs more and is worth it on west-facing windows that cook in the afternoon.
- Insert vs. full-frame: an insert drops into the existing frame and is faster and cheaper; full-frame replaces the whole assembly and is the right call when frames are rotted or you’re changing window sizes.
- Style and grid: double-hung, casement, and awning each behave differently for ventilation and cleaning. Grid patterns add cost but matter for matching the original look on older homes.
- Hardware and finish: interior trim species, exterior color, and hardware finish are small line items that shape how the finished job reads from the curb.
What Window Installation Costs in Larkspur, CA
Window Installation in Larkspur runs $4,500 – $15,000 for a typical whole-house replacement. A single-window swap sits near the low end; a full house with custom sizing and trim work lands at the high end. Impact window installation, where required, runs $8,000 – $25,000. The variables that push a job toward one end or the other:
- Window count and size: the obvious driver. Larger openings and picture windows cost more in material and labor.
- Existing condition: rot, settling, or out-of-square frames add rough-opening repair you won’t see in a photo estimate.
- Insert vs. full-frame: full-frame means more demo, flashing, and trim, and it shows in the price.
- Material and glass grade: vinyl and standard dual-pane sit at the bottom; fiberglass, clad wood, and laminated glass push the number up.
- Permit scope and inspection: jobs that need a permit and inspection carry that cost and scheduling time.
A written estimate from us is line-item: every unit, the trim, the permit, the labor. What typically isn’t included is anything discovered behind the wall after demo, like hidden rot or old wiring, and we don’t do change orders on a surprise basis. We quote firm and show you before we proceed. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Larkspur Homes Specifically Do to This Job
Larkspur is a small, largely built-out Marin County town, and that reshapes window work in ways you don’t hit in newer subdivisions. Downtown Victorians and bungalows along Magnolia Avenue carry original or decades-old frames, so we’re usually doing full-frame replacement and repairing rough openings, not dropping inserts into sound wood. Hillside homes present a different set of problems: access, scaffolding on slopes, and drainage detailing that flat-lot homes never see.
Two local realities drive the schedule and the spec. First, wet winters squeeze the exterior work window, so flashing and sealing get done right the first time because a callback in February isn’t cheap. Second, wildfire exposure makes fire-resistant and tempered glazing an ongoing consideration on exterior changes. And because Larkspur’s Design Review process scrutinizes street-visible exterior changes far more than neighboring Corte Madera or San Anselmo do, window style and trim choices on downtown and visible hillside homes need to clear review, and we handle that as part of the permit work. We cover the 94939 and 94977 ZIPs, and if your windows are part of a larger scope, see our Windows & Doors in Larkspur page or the full Windows & Doors service. Homeowners often pair this with Wood Fence in Larkspur or Chain Link Fence in Larkspur while crews are on site, and you can see all we do across Larkspur.
Serving Larkspur, CA – Our Local Coverage Area
We serve Larkspur and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Window Installation in Larkspur
A single window is a half-day; a batch of six to eight takes two to three days on site. Add 2 – 5 weeks of lead time for ordering and permits. Call (866) 320-2646 for a schedule that fits your job.
Most whole-house replacements and any job that changes an opening’s size or affects structure require a permit, and street-visible exterior changes may go through Design Review. We pull the permit and pass the inspection for you. Call for a scope check.
Yes, in most cases – an insert goes into the existing frame and leaves the wall alone. Full-frame replacement touches the rough opening but not the structure unless rot or sizing forces repair. We tell you which applies after measuring.
Expect $4,500 – $15,000 for a typical house, and $8,000 – $25,000 for impact-rated units. Count, sizing, frame condition, glass grade, and permit scope move the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every window job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s on top of any manufacturer warranty on the units themselves.
Get a Free Window Installation Estimate in Larkspur
If your Larkspur home needs windows replaced, start with a free on-site estimate. Call (866) 320-2646, and a live person picks up any hour of the day. We’ll schedule a visit, measure every opening, and hand you a written line-item quote with the permit and trim spelled out – no surprises, no pressure. Our technicians bring up to 12 years of experience to the job, and the work is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.