Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in San Bruno, CA: What It Costs and How Long It Takes
Window Replacement in San Bruno typically runs $4,500 – $15,000 for a full-home job, and most single-family homes here are finished in 2 – 4 days. The work is a straight swap of the old units for new ones – no plumbing, no electrical, no structural changes unless you’re widening an opening. Call (866) 320-2646 and we’ll set up a free on-site estimate with a written, line-item quote before anything gets ordered.
How we run a window replacement job, start to finish
Here’s the actual sequence. The number you see on the estimate is the number you pay, so we spell out every stage before we start.
Stage 1: Measure and order (1 – 2 hours on site, then 4 – 8 weeks lead time)
We measure every opening, check the existing frames for rot or out-of-square conditions, and confirm the window type and configuration with you. You decide on material, glass package, and finish at this stage. Then we order. Most window packages take 4 to 8 weeks to arrive, and that wait is usually the longest part of the whole project.
Stage 2: Pre-install walkthrough (30 – 45 minutes, day of work)
We lay drop cloths, move furniture away from the openings, and confirm the install sequence with you. You’ll see exactly which rooms get worked on which day. This is also when we check that no gas or electrical lines run near the openings we’re touching, which matters more in San Bruno than in most Bay Area cities (more on that below).
Stage 3: Demo and prep (day 1, most of the day)
Old sashes and glass come out, and we inspect the rough opening. This is where surprises live. In older San Bruno homes, we regularly find rotted sheathing and softened trim behind the frame, because the marine fog has been working on that wood for years. We photograph anything we find and tell you the cost before we fix it. No quiet additions to the bill.
Stage 4: Install and flash (days 2 – 3, the bulk of the work)
New units go in, get shimmed and leveled, and then get flashed and sealed. Flashing is the part nobody sees and the part that decides whether the window lasts. We use weather-resistant detailing suited to a fog belt, because a window that leaks in year two is a failed install, not a bad window.
Stage 5: Trim, sealant, cleanup, and walkthrough (last day)
Interior trim goes back, exterior sealant gets finished, and we clean every pane. You walk the job with us room by room. Any adjustment on a sticky sash or a gap in trim gets handled before we leave. Then the 730-Day Done Right Promise covers the work in writing – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
You’ll pick a material, a glass package, and an operating style. Here’s the honest trade-off on each.
- Vinyl frames. The most common choice for replacement work. Low maintenance, holds up to damp air, priced toward the low end of the range. Doesn’t take paint well if your home has painted trim you want matched.
- Fiberglass frames. Stronger and more stable in temperature swings; expands and contracts less than vinyl. Costs more, but it’s the pick when you want a modern frame that lasts and don’t want to repaint.
- Wood-clad frames. Wood inside, aluminum or vinyl outside. Warm interior look, weather-resistant exterior. This is where brand matters – we work with Andersen and Marvin when a homeowner wants a premium wood-clad unit, and the difference in fit and finish is real.
- Glass packages. Double-pane is the baseline. Low-E and argon fill are worth the upgrade on west- and north-facing walls in San Bruno, where the fog and wind hit hardest. Triple-pane is available but usually not the best spend on this climate.
- Operating style. Fixed picture windows cost the least per opening. Casement and awning windows seal tighter than sliders and suit windy exposures. Double-hung is the classic choice for post-WWII homes where you want the original look preserved.
If your replacement is one piece of a bigger exterior project, take a look at Windows & Doors in San Bruno for the wider scope.
What Window Replacement costs in San Bruno, CA
Plan on $4,500 – $15,000 for a typical full-home replacement. A single window or two sits near the bottom of that band; a whole house with premium frames and upgraded glass lands near the top.
The variables that push a job up or down:
- Number and size of openings. This is the biggest single driver. Four windows and twelve windows are different projects.
- Frame condition behind the old unit. Rotted sheathing or trim adds labor and material. In San Bruno’s fog belt, we find this more often than not on 1940s – 50s homes.
- Material grade. Vinyl at the low end, fiberglass and wood-clad at the high end.
- Glass package. Low-E and argon add cost but pay back on energy and comfort.
- Permit scope. Like-for-like swaps often don’t require a permit; changing the size of an opening does. We’ll tell you which side of that line your job falls on before we start.
A written estimate includes the windows, labor, flashing and sealant, trim reinstallation, cleanup, and haul-away. It does not include repair of hidden rot discovered after demo, which we quote separately and only with your approval. Upfront pricing means no change orders you didn’t agree to. And if your project crosses $10,000, there’s $1,000 off, plus 0% financing for 18 months.
Homeowners often pair window work with exterior upgrades like a Vinyl Fence in San Bruno or an Aluminum Fence in San Bruno while crews are already on site.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno homes specifically do to this job
San Bruno’s housing stock shapes this work in ways a generic window page can’t explain. The Crestmoor neighborhood and the streets around it are dominated by post-WWII single-family homes from the 1940s and ’50s. A large share of those were rebuilt or extensively retrofitted after the 2010 PG&E gas pipeline explosion, so you’ll find a genuine mix on the same block: newer seismic-compliant structures next to original homes that still need foundation bolting, shear walling, and chimney bracing.
That history matters to window work in two ways. First, permits and inspections in the 94066 zip run through a city that has been rigorous about retrofit compliance since 2010, and contractors working near the old Crestmoor blast zone have to follow PG&E gas line clearance procedures before any digging or anchoring. We account for that before we schedule. Second, the marine layer and steady onshore winds mean moisture intrusion and rot are the enemy. We see softening sheathing and failing trim on the windward walls far more than on the sheltered side, and we flash accordingly. Installers who don’t know this climate hand you a window that weeps into the wall by the second wet season.
We cover all of San Bruno, and homeowners here often ask about our Windows & Doors options while we’re on the estimate.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Window Replacement in San Bruno
Most full-home jobs are finished in 2 – 4 days of on-site work, with the 4 – 8 week window order lead time ahead of it. Larger homes or jobs that turn up hidden rot run longer, and we’ll tell you that at the estimate, not mid-job. Call (866) 320-2646 for a timeline on your specific home.
Like-for-like swaps usually don’t require a permit; changing the size or location of an opening does. We confirm which applies to your job before we order anything, and we pull permits and pass inspections when they’re needed. Call (866) 320-2646 and we’ll sort it out for your address.
Yes. Standard replacement keeps the existing opening and doesn’t touch plumbing, electrical, or framing. Only a widened or relocated opening changes that, and we’d flag it up front. For a straight replacement, your interior finishes stay put. Call (866) 320-2646 to confirm your configuration.
Most jobs land between $4,500 and $15,000, depending on window count, frame condition, material, and glass package. The written estimate breaks out each line so you can see what drives the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (866) 320-2646 with any warranty question before you sign.
Get a free Window Replacement estimate in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for Window Replacement in San Bruno. A live person answers around the clock, and we’ll walk your home, measure the openings, and hand you a written line-item quote with no pressure and no surprises. Most estimates take under an hour.
Written by the team at Groundwork Construction Co.