Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in San Francisco: What It Costs and How Long It Takes
Window replacement in San Francisco typically runs $5,310 to $17,700 for a whole-house project, depending on how many openings, the frame material you choose, and whether the existing frames are solid enough to keep. Expect two to four days of actual install time on a typical project, plus a few weeks on the front end for measurement and lead time on ordered units. Call (866) 320-2646 for a free on-site estimate and a written line-item quote.
How window replacement works, stage by stage
We don’t hand you a catalog and disappear. The sequence below is what a real window replacement in San Francisco looks like from the first walkthrough to the final seal, and it’s how we keep surprises out of the middle of the job.
Stage 1: Free on-site estimate and measurement (about 90 minutes). We walk every opening, note whether it’s wood-frame, stucco-clad, or masonry, and measure the rough opening with a tape – not a photo or a guess. This is where you first hear real numbers, because we price off the actual opening, not a square-foot estimate over the phone.
Stage 2: Product selection and order (one conversation, then 3-6 weeks of lead time). You pick the frame material, glass package, and hardware. This is the last time you change your mind without cost. Once the units are ordered, you’re in queue with the manufacturer, and that wait is the longest part of the job.
Stage 3: Permit and scheduling. We pull the permit and schedule the install around building access. If your San Francisco address is on a steep grade or you’re working from a rear-facing unit with a tight alley approach, the crew’s arrival logistics get planned here, not on install day.
Stage 4: Demo and install (1-2 days for most homes). The crew protects the floor and furniture, cuts out the old unit, checks the rough opening for hidden rot, and sets the new window. Any rot or framing damage gets flagged to you immediately with photos and a fixed price for the repair before anyone touches a hammer. Windows go in a whole wall at a time, sealed and flashed as they go, so the house is never fully open overnight.
Stage 5: Trim, seal, and walkthrough (half a day). Interior and exterior trim go back on, caulk and flashing are checked twice, and we do a daylight and water-test walkthrough with you. That’s also when the 730-Day Done Right Promise gets explained in writing – if a seal fails or a sash sticks within the promise window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Vinyl frames: The budget-friendly pick, typically the low end of the $5,310 – $17,700 range. Vinyl resists moisture well and needs little upkeep, but it’s hard to paint a different color and it doesn’t flex well on San Francisco’s older, out-of-square openings – especially in a 1920s Edwardian where nothing is quite plumb.
- Aluminum frames: Slimmer sightlines and good on hillside homes with large expanses of glass, but aluminum conducts heat and cold, so insist on a thermal break if you go this route. Salt air near the coast will pit standard mill-finish aluminum, so spec an anodized or powder-coated finish instead.
- Wood frames: Matches the character of the city’s Victorian and Edwardian stock and is the right choice when the surrounding trim matters. Higher cost, and it needs repainting every 5-8 years on the fog-belt side of the city.
- Glass package: A standard double-pane versus a low-E or argon-filled unit changes both cost and comfort. On west-facing windows near the Pacific, a higher solar-gain rating helps, especially in a south-facing kitchen.
- Insert versus full-frame: Insert replacements are cheaper and faster but leave the original frame in place. Full-frame replacements are the better call when the existing sill or jamb has water damage, which is common on homes near the ocean.
We stock Andersen and Marvin because those are the lines our customers keep asking for by name, and both hold up on a marine climate better than most. Your selection is a conversation about the house, not a sales pitch.
What window replacement costs in San Francisco, CA
Whole-home window replacement in San Francisco runs $5,310 to $17,700. That’s the honest spread, and it covers a typical 4-8 home in the city. A single window replacement sits well below that range; a whole Edwardian with 20 openings sits at the top or above it.
Four variables push a job toward the low end versus the high:
- Number and size of openings: The single biggest cost driver. Each opening is its own measurement, order, and install.
- Frame condition: Solid rough openings mean a standard install. Rot in the jamb, failed flashing, or a brick-based foundation needing repairs pushes the number up and often requires full-frame replacement instead of an insert.
- Material and glass: Vinyl and standard double-pane sit near the bottom; wood frames and low-E glass sit near the top.
- Permit and access: A straightforward permit and a level street approach keep labor costs down. A hillside lot or rear-unit access can add a day of labor.
Every written estimate is a line item – per window, per material, and per repair if we find rot. Upfront pricing, no surprises: the number you see is the number you pay, and we don’t come back with a change order for a problem we should have caught at the walkthrough. What’s typically not included: structural repairs if the framing is compromised, and repainting beyond touch-up – we can quote those separately once we’re in the wall. If the job is part of a full Windows & Doors in San Francisco scope, we’ll bundle the estimate together so you aren’t paying for two site visits.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco homes specifically do to this job
San Francisco window replacement is a different animal than the suburbs. The city is nearly all pre-1906 gold-rush-era and post-1906 rebuild stock, and a lot of it is Victorian and Edwardian wood-frame row houses on brick foundations. Those homes rarely have a square opening, so insert windows need careful shimming, and older openings often hide rot in the sill that only shows after the old unit comes out. On west-side streets like those above the Sunset and through the Outer Richmond, the marine fog and salt air from the Pacific corrode standard fasteners and paint, so we spec stainless hardware and galvanized flashing even on small jobs – it’s a cost you don’t see, and a failure you would see within a couple of years.
Permitting is the other local reality. Design review on some hillside lots and the discretionary planning gauntlet tied to the city’s historic stock can add weeks to approval on exterior changes; we walk you through the scope as part of your estimate so you know if a permit is required before we order a single window. The marine climate also means work can proceed year-round, but every job gets sealed and flashed as if the next fog bank is due tomorrow. We cover all of this across San Francisco.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions
Most projects take 1-2 days on site, plus 3-6 weeks of lead time for ordered windows. The lead time is the longest stage, so if you’re planning around a move-in date, call (866) 320-2646 early to get your order in the queue.
Often yes, particularly when you’re changing the size or type of opening or the exterior appearance. Like-for-like replacements can sometimes proceed without one, but the city’s rules around historic districts and hillside homes make it worth confirming with us before ordering anything. Our estimate includes a permit walkthrough so you know exactly where you stand.
Yes, insert replacement leaves the framing, plumbing, and electrical alone, which is exactly why so many homeowners choose it. When there’s existing rot, a full-frame replacement may be the safer call, and we’ll show you the photos and quote the difference before we start.
Whole-home replacement sits between $5,310 and $17,700, and a single window sits below that. The exact number depends on how many openings, the material, the glass, and whether rot turns up in the jambs. Call (866) 320-2646 for an exact quote, and remember we offer 0% financing for 18 months and $1,000 off projects over $10,000.
Every window job is covered by the 730-Day Done Right Promise – if the work isn’t done right, we make it right, and that’s one of the longest workmanship guarantees in residential construction. Manufacturer coverage on the units themselves runs alongside it, and we hand you both in writing at the final walkthrough.
Get a free window replacement estimate in San Francisco
Every project starts with a free on-site estimate – no pressure, no catalog, just a tape measure and a straight answer about what your openings need. Call (866) 320-2646 and a live person will book the visit, walk you through what happens on the day, and note your building’s access so the crew isn’t surveying your alley on install morning. Homeowners often pair this with Vinyl Fence in San Francisco or Aluminum Fence in San Francisco once their exterior work is underway – both come from the same Windows & Doors and exterior trades we handle, so one visit can cover several projects.
Written by the team at Groundwork Construction Co.