Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWood Fence in San Francisco, CA
A wood fence in San Francisco typically costs $3,600 to $9,800 for a standard 150-linear-foot residential run, and most installs in the city are completed in one to three days depending on access, slope and permit requirements. We build cedar, redwood and pressure-treated pine fences for homeowners in Noe Valley, the Sunset, Bernal Heights, the Richmond and every neighborhood in between. Fencing in this city is its own animal: fog belt moisture, steep lots, tight side yards and a permit process that trips up out-of-town crews. We know the terrain, and we build for it.
Groundwork Construction Co. of San Francisco handles wood fencing as part of our full-scope Fence Installation work, which means the same accountability that covers a kitchen or a roof covers your fence line. Every wooden fence we install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to a fence the same way it applies to a James Hardie siding job.
When you call (866) 320-2646, a live person answers, day or night. No voicemail, no waiting until Monday. We show up for the estimate with real numbers, not a range designed to grow once the posts are in the ground. Upfront pricing, no surprises.
Key Takeaways
- Wood fence installs in San Francisco run roughly $24 to $65 per linear foot installed, with most residential projects landing between $3,600 and $9,800.
- Cedar and redwood outperform pine in the coastal fog belt; moisture and termite pressure here punish cheap lumber.
- Most San Francisco fence projects require a building permit when they exceed 6 feet or sit on a property line; we handle the paperwork.
- Every install is covered by the 730-Day Done Right Promise and priced upfront before a single post hole is dug.
When You Need Wood Fence
Most homeowners call us when something has already gone wrong, or when a life change makes the current fence stop working. Here are the situations we see most often in San Francisco.
- Storm damage after a winter blow. The same Pacific storms that soak the Outer Sunset and knock branches onto the Richmond knock over aging fences too. If a section is leaning or a post has snapped at the ground line, we can usually assess and replace the damaged run without tearing out the whole line. Call us and we’ll take a look.
- The fog belt has eaten your boards. Constant moisture in neighborhoods like the Sunset, Parkside and the outer Richmond accelerates rot, especially at the post base and the bottom rail. When boards are soft to the touch or you can push a screwdriver into a post, the wood is past saving. We’ve pulled more rotten pine from fog-belt yards than we can count.
- You’re adding a dog or a kid to the household. A 4-foot picket that was fine for adults doesn’t contain a determined Labrador or keep a toddler away from a steep drop. We build to the height and tightness you actually need, with gates that latch properly.
- A neighbor’s fence is failing and it’s on your side of the line. Property-line fences create more confusion than almost any other project. We survey the line, confirm ownership, and build on the correct side so you’re not paying to fix a fence that legally belongs to someone else.
- You want privacy from a new build next door. San Francisco lots are tight, and a new addition or second-story deck next door can wipe out a decade of privacy overnight. A 6-foot cedar privacy fence, done to code, restores it.
- You’re prepping a home sale or a rental turnover. A tired fence drags down a listing photo fast. We can price a full replacement or a targeted board-and-rail refresh, whichever makes financial sense for your timeline.
Our Wood Fence Process
Fencing looks simple from the sidewalk. It isn’t. Posts set in the wrong soil, rails spaced for a dry climate, or a gate hung without accounting for slope will fail inside two winters here. Here’s how we run a wood fence project in San Francisco, start to finish.
- On-site estimate and line survey. We walk the property, confirm where the property line actually sits, measure the run, check slope and access, and identify any underground utilities before we quote. If a permit is required, we tell you upfront and handle the application. You get a written, upfront price before anything is ordered.
- Material selection. We walk you through cedar, redwood and pressure-treated options, post sizing, and finish. We’re not going to sell you pine for a fog-belt yard and pretend it’ll last as long as cedar. You pick the material that fits your budget and your neighborhood’s climate; we tell you honestly how each one performs.
- Demolition and disposal. We remove the old fence, haul it away, and prep the ground. On tight San Francisco lots, that often means hand-carrying debris through a side yard because there’s no truck access. We plan for that in the quote so there are no surprise charges later.
- Post setting and framing. Posts go in with proper depth and footing for the soil and slope, set plumb and braced. We frame rails and structure to handle wind load and the seasonal moisture swings that come with living between the ocean and the bay. This is the part nobody sees and the part that determines whether the fence lasts 8 years or 20.
- Boards, gates and hardware. We hang boards, build and hang gates that clear the ground and swing true, and install galvanized or stainless hardware that won’t rust out in the salt air. Gates get extra attention; a gate that sags in six months is the fastest way to lose trust in a fence.
- Final walkthrough and cleanup. We walk the line with you, check every gate and post, clean the site, and hand over your 730-Day Done Right Promise in writing. If anything’s off in the first two years, we come back and make it right.
Because we run fencing alongside our other trades, we can also flag related issues while we’re on site. A fence that keeps failing at the base often means drainage or a gutter problem on the house, and it pays to know that before it turns into a foundation issue. That’s the value of a single contractor who handles everything from foundation to finish line.
Wood Fence Pricing in San Francisco
Wood fence installation in San Francisco runs about $24 to $65 per linear foot installed, all-in. That spread is wide, and it’s wide for real reasons: material, height, slope, access and permit cost all move the number. Most homeowners we work with land between $3,600 and $9,800 for a typical residential run. Here’s roughly how it breaks down.
| Project | Typical Range | Notes |
|---|---|---|
| 6-ft dog-ear pine, 100 linear ft | $2,400 – $4,200 | Lowest cost; shorter lifespan in fog belt |
| 6-ft cedar privacy, 150 linear ft | $5,400 – $8,600 | Best all-around value in SF climate |
| 6-ft clear redwood, 150 linear ft | $7,200 – $11,400 | Highest durability and appearance |
| Single gate, hung and hardware | $350 – $750 | More on slope or with custom widths |
| Old fence removal and haul-away | $400 – $1,400 | Higher on tight lots with limited access |
| San Francisco building permit | $250 – $900 | Varies by height and project scope |
What drives the price up in San Francisco specifically:
- Slope and access. A hillside yard in Bernal Heights with no truck access costs more to build than a flat Sunset lot with a driveway. More labor, more hand-carrying, more time.
- Material. Clear redwood costs roughly double pine for the same run. Cedar sits in the middle. We’ll tell you which one earns its price for your lot.
- Height and code. A 6-foot fence meaningfully improves privacy but pushes you into permit territory in many cases. We handle that.
- Post spacing and footing. Wider spacing saves a little money and costs you durability in wind and moisture. We don’t cut corners here.
We offer a free project estimate and design consult, and if your fence project runs over $10,000, you take $1,000 off. Larger projects can also use 0% financing for 18 months, which turns a $9,000 fence into a much more manageable outlay. The number you see on the estimate is the number you pay. Call (866) 320-2646 to get your exact quote.
FAQs – Wood Fence
How much does a wood fence cost in San Francisco?
A wood fence in San Francisco typically costs $24 to $65 per linear foot installed, or roughly $3,600 to $9,800 for most residential projects. Cedar and redwood push the higher end; pine sits lower but doesn’t last as long in the coastal fog belt. Call (866) 320-2646 for a free, upfront estimate on your exact run; estimates carry no obligation.
Do I need a permit for a wood fence in San Francisco?
You usually need a building permit in San Francisco when a fence exceeds 6 feet or sits on a property line, and requirements vary by height and placement. That’s why we confirm permit needs during the on-site estimate rather than after the fact. We handle the application as part of the project so you’re not left chasing paperwork. Call us to find out what your specific fence will require.
What’s the best wood for a fence in San Francisco’s fog belt?
Cedar or clear redwood is the best choice for most San Francisco lots because both handle constant moisture and termite pressure far better than pine. Pine works on a tight budget and in more sheltered inland neighborhoods, but it typically needs replacement sooner. We’ll tell you honestly which material fits your climate and budget. Call (866) 320-2646 and we’ll walk you through the options for your yard.
Can you build a wood fence on a slope or tight side yard?
Yes. Slope and tight access are routine in San Francisco, and we account for both in the estimate so there are no surprise charges once the work begins. Posts are set plumb and braced for the grade, and gates are hung to swing true on sloped ground. We’ve built fence lines behind Bernal Heights homes and through narrow Sunset side yards. Call us and we’ll take a look at your property.
Wood fencing is one of those projects where the materials and the installer both matter, and where the cheapest bid usually costs the most in the long run. We’re proud to bring brand partners like James Hardie and Cambria into homes across San Francisco for our other trades, but a wood fence comes down to lumber quality, footing depth and honest labor. Our technicians have up to 12 years of experience, they arrive background-checked and in uniform, and every install is backed by our 730-Day Done Right Promise. If you’re ready to price a fence that will hold up to the fog and the wind, call (866) 320-2646 for a free estimate and design consult. A live person answers, 24/7, and the price you get is the price you pay.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.