Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Mill Valley, CA: What It Costs and How Long It Takes
A wood fence in Mill Valley typically runs $3,500 to $9,000 for most residential lots, with the range driven by linear footage, grade of lumber, and how much hillside engineering the site demands. Most jobs are built in two to four working days once materials land. Call (866) 320-2646 for a free on-site estimate; we’ll walk the property line with you and put a written number together before you commit to anything.
How a Wood Fence Goes In, Stage by Stage
Every lot here is different, but the sequence rarely is. On a hillside property off Summit or in the flats near Old Mill, the rhythm holds the same.
- Day 1, morning: walk and mark. We stake the line, confirm property boundaries against your plat or survey, and flag utilities. On tight lanes, deliveries are scheduled for early windows before the road fills in. You confirm the line and gate placement here, after which moving it gets expensive.
- Day 1, afternoon: demo and prep. Old fencing comes out, posts pull, and we set the base for new posts. On sloped ground we use stepped or racked post setting rather than flooding a trench, since hillside runoff will find any weak point. Post holes are dug to depth and set in concrete.
- Day 2: posts and structure. Posts cure overnight and get plumbed. We frame rails, set the top cap line, and hang gate hardware. You confirm the gate swing direction and latch side at this point.
- Day 3: boards and finishing. Pickets or dog-ear boards go up row by row, with the top line run straight across the run even where the grade steps. Cut-offs are hauled away the same day.
- Day 4: inspection and walkthrough. We check every post for plumb, every gate for clearance and smooth swing, and we walk the line with you before final cleanup.
Larger properties, steeply raked runs, or gates with custom hardware push this toward four or five days. Get a clear schedule in your estimate; a fence that’s half up for a week invites dogs, wind, and neighborhood questions.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Cedar vs. redwood. Cedar is the workhorse: durable, resists rot well, and takes stain cleanly. Redwood is the local favorite and pairs naturally with the early-1900s redwood and shingle cottages near downtown, but it costs more per board foot and benefits from sealing. Both hold up in Marin’s wet-winter, dry-summer swing.
- Board style. Dog-ear or flat-top pickets for a classic run, board-on-board for privacy and wind resistance, or a shadowbox style on shared lines where you want a good-neighbor look from both sides. Shadowbox costs more labor but avoids the “whose side gets the good side” problem.
- Post spacing and depth. Posts set at 8 feet generally, tighter on exposed ridges. On hillside runs, deeper holes and extra bracing pay off when winter wind gets up.
- Finish. Natural, clear-sealed, or stained to match the house. A quality penetrating stain adds a step but noticeably extends the life of cedar and redwood.
- Gates. Standard swing, self-closing, or a double gate for equipment access. If you’ll ever need to bring a trailer up a narrow lane, say so at estimate time; retrofitting access is a bigger job than planning it.
What a Wood Fence Costs in Mill Valley, CA
For most single-family properties here, a wood fence in Mill Valley lands between $3,500 and $9,000 installed. That covers materials, labor, post setting, and cleanup. Jobs at the top end usually involve steep grade, long runs, or custom gates.
What pushes a job up or down:
- Linear footage. The single biggest driver. A 60-foot side-yard run is a different project than 200 feet around a corner lot.
- Grade and access. Sloped or stepped runs require more engineering and slower labor. Single-lane no-turnaround streets add delivery time and staging complexity.
- Material grade. Cedar vs. redwood, tight-knot vs. clear, and whether you stain.
- Demo and disposal. Removing an existing fence adds cost and haul-away.
- Permits. Mill Valley generally requires permits for fences over a certain height, and design review can enter the picture depending on zoning and hillside location.
Every written estimate itemizes materials, labor, disposal, and permits. If a bid comes in as one lump number with no line items, that’s a red flag. Our numbers are upfront and stay fixed unless you change scope mid-job. Calls are answered by a live person 24/7, so questions don’t sit over the weekend.
See the difference
Before
After
Before
After
Before
AfterWhat Mill Valley Homes Specifically Do to This Job
Mill Valley isn’t an off-the-shelf town. Steep hillside lots, tight tree-lined lanes, and a discretionary design-review process mean every project here is a site-specific puzzle. On many hillside streets, crews stage materials in pre-dawn windows and use a spotter just to get a truck up the lane without clipping a hedge or a parked car. On properties above downtown, wildfire-resistant detailing matters even on a fence: non-combustible or fire-rated materials where the fence meets a deck or structure, ember-resistant details near vents, and clear defensible space around the run.
The housing stock shapes the job too. Early-1900s redwood and shingle cottages near downtown often have older foundations and unpermitted past additions, so we measure twice against the plat. The 1950s-70s ranch and split-level homes on the hillsides frequently have redwood decks cantilevered over slopes, and the fence line needs to work with the grade rather than fight it. Winter rainfall and hillside runoff are the main failure modes we see: posts set too shallow, boards not sealed, and wind loading on exposed ridges pulling a run out of plumb.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Mill Valley
Most residential wood fences here take two to four working days, weather permitting. Wet winters can push the schedule, so we generally aim for a dry-weather window. Call (866) 320-2646 for a firmer timeline once we’ve seen the property.
Often yes, and it depends on your zoning and lot. Fence height, setback from the property line, and hillside location all factor in. We handle the paperwork and get the inspection passed. If you’re also considering a broader scope, it may make sense to look at Fence Installation in Mill Valley to understand how a fence fits into the project.
Yes, in nearly every case. We locate utilities before digging and set posts around existing services. If a fence line runs over a septic line, footing, or drainage, we’ll flag it during the walkthrough and adjust the layout. Call (866) 320-2646 if you’re unsure what’s buried on your lot.
Plan on $3,500 to $9,000 installed for most homes here. Linear footage, cedar vs. redwood, grade, and access are the big movers. Reach out for a line-item quote; estimates are free and we answer the phone.
Every fence we build is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right. We also use verified brand partners like James Hardie on adjacent exterior projects for consistency in materials.
Mill Valley is a market where a fence is part of a bigger picture: hillside drainage, wildfire codes, and neighbors who notice everything. If you’re thinking through the whole property, our Fence Installation service covers the full scope, and many homeowners pair a new fence with Paver Driveways in Mill Valley or Concrete Driveways & Concrete Work in Mill Valley to fix access and drainage at the same time. We serve homeowners throughout Mill Valley and the surrounding hillside communities including Tamalpais-Homestead Valley, Corte Madera, Larkspur, and Tiburon.
Get a Free Wood Fence Estimate in Mill Valley
If you’re pricing a wood fence in Mill Valley, the next step is a free on-site estimate. We walk the line with you, talk through material and grade options, note any permit or access issues, and leave you with a written, line-item number. No pressure, no vague lump sums. Call (866) 320-2646 and we’ll set a time that works.
Written by the team at Groundwork Construction Co.