Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Long Do Windows Last in San Francisco, CA?
Windows in San Francisco last 10-15 years on the fog-belt side of the city and 20-25 years on sheltered, inland-facing exposures. The national average of 20-25 years assumes a climate San Francisco doesn’t have. Marine air, salt, and the thermal cycling between west-side hills and sunnier neighborhoods compress lifespan for standard materials and standard installation. Same brand, same opening, different outcome depending on what got specced and how it got fastened. If your windows are 12-15 years old and showing fogged glass or sticky hardware, it’s worth a look now. Call (866) 320-2646 for a free assessment.
Groundwork Construction Co. of San Francisco does this work across the San Francisco service area and knows what fails first, where, and why.
Real Lifespan by Material, Adjusted for San Francisco Exposure
National lifespan charts get published by manufacturers and repeated everywhere. They assume moderate humidity and mild salt exposure. San Francisco is not that. Below is what we actually see, split by fog-belt exposure (west of Twin Peaks, the Sunset, Richmond) versus sheltered exposures (Noe Valley, Bernal, the Mission, Potrero).
| Material | National Average | SF Fog-Belt Exposure | SF Sheltered Exposure |
|---|---|---|---|
| Vinyl | 20-25 yrs | 10-14 yrs | 15-20 yrs |
| Wood (clad or painted) | 20-30 yrs | 12-18 yrs (with proper priming) | 20-28 yrs |
| Fiberglass | 20-25 yrs | 15-18 yrs | 20-25 yrs |
| Aluminum-clad (Andersen, Marvin) | 20-30 yrs | 18-24 yrs | 25-30 yrs |
The gap between a cheap vinyl unit and a properly finished aluminum-clad unit isn’t marketing. It’s about 8 to 10 years of service life in the same opening on the same street. That’s the difference between replacing windows once in a home’s tenure and replacing them twice.
What Actually Kills a Window in San Francisco
Three failure mechanisms dominate here, and none of them are what most homeowners expect. Glass and frame rarely fail first. Hardware, sealant, and flashing do.
Salt-air corrosion on standard hardware
Pacific and Bay salt air attacks zinc-coated fasteners, standard caulk formulations, and unprimed aluminum faster than homeowners realize. The fog belt holds moisture against hardware for days at a stretch. On a west-side hillside, that means screws on a window flange can go from bright to orange in under 18 months. Hands on the window in our crews see this on every second or third job on the west side of the city.
Sealant failures on latex caulk
Standard latex caulk is designed for inland climates. In San Francisco, it skins, cracks, and pulls away from flashing within 3-5 years on exposed elevations. Once the sealant goes, water sits against the rough opening, and that’s where rot starts in the 1880s-1920s wood-frame row houses that make up so much of the city’s stock. Paintable silicone costs more on the front end and lasts 3-4 times longer in the fog.
Galvanized versus standard flashing
Cheap flashing is a hidden failure. It looks fine at install, then pits and separates from the substrate after a handful of wet seasons. Marine-grade stainless flashing and properly integrated pan flashing cost more in the bid but prevent the callbacks that erode a window’s life.
Common Local Scenarios We See
Every neighborhood fails its windows a little differently. Some examples that come up often:
- Sunset and Richmond district row houses: Original 1920s-1950s units with single-pane glass and steel frames. Fog-driven condensation has been running down the interior frames for decades, and the sills are usually the first thing to soften.
- West-side hillside homes near Twin Peaks and Mount Davidson: Standard zinc fasteners fail within 7-10 years. Hardware replacement is common before the window itself needs to go.
- Edwardian and Victorian stock in Noe Valley and the Mission: Original wood sash windows can last 30+ years with proper maintenance, but only if the exterior trim and casing are primed and sealed. Skipped priming is the top cause of premature rot in these homes.
- Post-war stucco buildings in the outer avenues: Stucco cracks let moisture bridge the flashing. Windows facing the ocean often show interior fogging from failed seals by year 12.
Building on steep hills with tight lots and the city’s discretionary planning process make window replacement in San Francisco a schedule-sensitive job, not a same-week one. Replacement goes through the permitting gauntlet like everything else in the densest core in the country.
Why Material Spec and Workmanship Beat Brand Name
The window brand matters less than the finish, hardware rating, and installation detail. That’s not a knock on brands. It’s the reason some of them are worth specifying in a coastal climate and others aren’t.
Andersen and Marvin finish their aluminum cladding at the factory with a coating that’s rated for marine exposure. Their hardware is stainless or engineered alloys that hold up in salt air. Off-the-shelf commodity vinyl with standard zinc hardware and latex-sealed flanges is fine at a lake house. It’s under spec’d for a home two miles from the Pacific.
When our crews do Windows & Doors, the spec sheet includes stainless fasteners, galvanized or stainless flashing, and paintable silicone sealant – not because we upsell, but because we won’t warranty a job that we know will fail in 8 years. That’s part of what the 730-Day Done Right Promise means. If the install isn’t right, we come back and make it right. Two years of workmanship coverage only makes sense if we’ve specced for the long run.
Window replacement in San Francisco typically runs $5,310-$17,700 for a whole-home project, with impact-rated units in the $9,440-$29,500 range. Upfront pricing means those numbers are what the bid says.
When to Replace Rather Than Repair
Repair is often viable when the frame is sound and only hardware or one sash has failed. Replace when you see interior glass fogging across multiple panes, water staining on the interior casing, or visible rot at the sill. The three signs together usually mean the window is past its service life in San Francisco, not just tired.
If you’re not sure which side of the line you’re on, that’s the call. A quick assessment costs nothing, and the wrong call – repairing windows that need replacing, or replacing windows that have 8 years left – is expensive.
FAQs
Windows in San Francisco last 10-15 years on fog-belt exposures and 20-25 years on sheltered, inland-facing sides of the city. That’s 5-10 years shorter than the national average, driven by salt air, moisture, and thermal cycling rather than any defect in the window itself. If your windows are in that 12-15 year range and starting to fog or stick, call (866) 320-2646 for a free assessment.
Repair is usually cheaper when only hardware or a single sash has failed – often a few hundred dollars versus a full replacement. Once you have multiple fogged panes or water staining at the casing, replacement is the better use of money because the frame and seals are already compromised. Getting a free assessment before you commit is the way to avoid paying twice. Call (866) 320-2646 for upfront pricing.
Aluminum-clad windows from Andersen and Marvin last longest in San Francisco, typically 18-24 years on fog-belt exposures and 25-30 years in sheltered neighborhoods. Their factory finishes and marine-grade hardware hold up to coastal salt air in ways commodity vinyl and standard aluminum don’t. The right spec and installation are what get you to those numbers.
We offer free estimates and can usually schedule an assessment within a few days, not weeks. Calls are answered by a live person 24/7, so you’ll get a real human on the line whenever you reach out. Call (866) 320-2646 to set a time.
If you’d rather have it looked at, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco – call (866) 320-2646. Our technicians have up to 12 years of experience, projects over $10,000 get $1,000 off, and 0% financing for 18 months is available so you’re not waiting on a repair that’s getting more expensive every season.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.