Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum vs Wrought Iron Fence in San Francisco: Which One Holds Up?
Choose powder-coated aluminum unless you specifically want the heft and hand-forged look of real wrought iron and you’re ready to repaint it every 5 to 7 years. That’s the honest bottom line. On a west-side San Francisco Victorian, iron fencing looks stunning the day it’s painted. Two fog seasons later, it’s showing rust bleed at every weld point, and not because the paint failed – salt air finds every micro-crack in the coating that hand-painting misses. Aluminum sidesteps that whole cycle. For a free comparison on your property, call (866) 320-2646.
Key Takeaways
- Powder-coated aluminum ornamental fence costs $4,720-$11,800 installed in San Francisco, and the coating never needs repainting.
- Wrought iron in coastal neighborhoods needs a full strip-and-repaint every 5 to 7 years; inland it stretches to 12 to 15.
- Modern aluminum reproduces period picket and scroll patterns closely enough that most people can’t tell the difference from the sidewalk.
- San Francisco Planning design guidelines in most historic districts accept aluminum ornamental fencing in period styles as compatible.
- Iron’s extra weight means heavier footings, which costs more on sloped lots where foundation work is already complicated.
Why Iron Fails Faster Here Than Anywhere Inland
This isn’t about cheap paint. It’s chemistry. Salt ions from the Pacific and the Bay settle on the metal, then work their way into the hairline gaps in the coating – specifically at weld joints, where the coating is thinnest, and at picket tips, where water pools. Once salt reaches bare steel underneath, rust forms and expands. It pushes the paint up from the inside. You get the familiar orange bleed line running down the picket, and by the time you see it, the corrosion started a season or two earlier.
Hand-painting over that spot doesn’t solve it. The rust keeps working under the new coat. That’s why a real fix is a full strip, sandblast or chemical, prime, and repaint – a job nobody wants to schedule every few years. Contractors on the west side of the city already spec stainless hardware and galvanized flashing on small jobs for exactly this reason; ordinary fasteners and coatings don’t survive the fog belt. Your fence is exposed to more of that salt air than any flashing on your roof.
What the Maintenance Really Costs Over 20 Years
Here’s the number most homeowners don’t run before they buy iron. A typical San Francisco front-yard iron fence – say 40 linear feet at 4 feet tall – will need roughly two full strip-and-repaint cycles over 20 years. At $15 to $25 per linear foot per cycle, that’s $1,200 to $2,000 per cycle, or $2,400 to $4,000 in maintenance alone by year 20. Powder-coated aluminum needs zero repainting in the same window. Pressure-wash it once a year and it’s done.
| Factor | Wrought Iron | Powder-Coated Aluminum |
|---|---|---|
| Installed cost (SF, 40 LF ornamental) | $6,500-$14,000+ | $4,720-$11,800 |
| Repaint cycle, coastal SF | Every 5-7 years | None |
| Repaint cycle, inland | Every 12-15 years | None |
| Cost per strip-and-repaint cycle | $15-$25 per linear foot | $0 |
| Weight and footing demand | Heavy; larger footings | Light; standard footings |
| Corrosion behavior in salt air | Rust bleeds at welds and tips | Coating resists salt |
If you want the deeper numbers on a full install, our Fence Installation in San Francisco page breaks down materials and scope, and the main Fence Installation page covers how we sequence a project from footings to final gate alignment.
The Hillside Weight Problem Nobody Mentions
San Francisco is built on and beside steep hills, and that changes the fence math. Wrought iron is substantially heavier per linear foot than aluminum, and it needs bigger footings and heavier anchor systems to stay plumb. On a sloped lot, footing work is already the complicated, expensive part – you’re digging into grade, dealing with drainage, sometimes underpinning near an old brick foundation. Adding iron’s weight multiplies that. Aluminum’s lighter load means standard footings in many cases, and a gate that swings true instead of sagging after a couple of wet winters.
Our technicians have up to 12 years of experience setting posts on sloped San Francisco lots, and we size footings to the actual grade and soil, not to a generic spec sheet.
Do Historic District Rules Allow Aluminum?
In most cases, yes. San Francisco Planning design guidelines in many Victorian and Edwardian neighborhoods call for fence materials compatible with historic character, and aluminum ornamental fencing built in period styles – picket, scroll, spear-top – is explicitly accepted as compliant in most of those zones. The look is what the guidelines care about, not the metallurgy. Modern powder coating comes in matte black and bronze finishes that read as painted iron from the street. If your block has specific design review requirements, we check them before quoting so there are no surprises at permit time. You can read more on the home page about how we handle planning in the city.
Sample the finish in person before you commit. On foggy mornings, matte black aluminum next to old iron looks nearly identical. That’s the point.
How Groundwork Handles Ornamental Fence Projects
We source ornamental fencing from curated brand partners – names like ActiveYards and Bufftech – so you’re choosing from finishes and patterns that hold up to coastal conditions, not just whatever’s in stock. Every install is backed by our 730-Day Done Right Promise: if rust bleed appears at a weld point within two years, that’s our problem to fix, not yours. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Upfront pricing means the number you see is the number you pay, with no line items appearing after the crew arrives. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which brings a full ornamental fence within reach without a lump-sum payment. Calls are answered by a live person 24/7, and every technician is background-checked and arrives in uniform.
FAQs
Aluminum ornamental fence installation in San Francisco runs $4,720 to $11,800 depending on height, linear footage, gate count, and finish, while wrought iron typically starts higher and adds $15 to $25 per linear foot every 5 to 7 years for repainting. For a free, itemized comparison on your property, call (866) 320-2646.
Every 5 to 7 years in coastal and fog-belt neighborhoods, versus 12 to 15 years inland where the salt exposure is lower. If you see rust bleed at a weld or picket tip, the repaint is overdue. Call (866) 320-2646 for an assessment before the corrosion spreads.
In most San Francisco historic and Victorian neighborhoods, yes – aluminum designed in period styles is accepted as compatible with historic character under the city’s design guidelines. We verify your specific block’s requirements before quoting. Call (866) 320-2646 to confirm what applies to your address.
For a fence showing rust bleed at multiple welds, replacement with powder-coated aluminum is usually cheaper over a 10-year window once you add a strip-and-repaint cycle. A single isolated spot can sometimes be treated. Call (866) 320-2646 for a straight answer on which side of that line your fence falls.
If you’d rather have your fence looked at in person than guess from a photo, Groundwork Construction Co. of San Francisco offers a no-pressure assessment anywhere in San Francisco – call (866) 320-2646 and we’ll walk the property with you.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.