Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose PGT Construction
Groundwork Construction Co. of San Francisco provides independent PGT construction service, repair, and installation for homeowners across the city – from fog-belt Victorians on the west side to high-rise units downtown. Because we’re independent, we source genuine PGT replacement glass, sashes, rollers, and hardware where they’re available, and matched aftermarket parts where they aren’t, without a manufacturer script steering the call. We are not affiliated with or authorized by PGT; we’re an independent PGT service provider that works with the WinGuard and Estate Collection product families daily. If you’ve got a fogged impact window, a dragging slider, or a full replacement in mind, call (866) 320-2646 to schedule your free estimate.
Why Trust Groundwork Construction Co. of San Francisco for Your PGT Construction?
Our technicians have up to 12 years of experience, and the ones who work on PGT units have spent that time learning how the product actually fails here. That’s different from reading a spec sheet.
A WinGuard aluminum impact unit installed in the Sunset or Richmond districts lives a harder life than the same unit in a dry inland climate. The fog belt and salt air work on glazing gaskets, perimeter seals, and fasteners in ways the manufacturer’s general guidance doesn’t always capture. We know what a failed seal looks like versus trapped condensation, and we know what a door that’s dragged on worn rollers has done to its own track.
Parts matter for warranty. Genuine PGT replacement glass, sashes, rollers, and hardware keep a unit as close to original spec as the product allows. When a part is discontinued, we source a matched aftermarket equivalent only for non-structural components and tell you plainly when that’s what we’re doing. Workmanship on every job is covered by our 730-Day Done Right Promise, backed in writing. Upfront pricing means the number you see is the number you pay, and calls are answered by a live person, 24/7. Reach our San Francisco team at (866) 320-2646.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in San Francisco
PGT builds solid products, but no window or door beats coastal conditions indefinitely. These are the failure modes we see most on San Francisco jobs, and why they happen:
- Failed perimeter seals and glazing gaskets on WinGuard impact units. Years of fog, wind-driven rain, and salt air break down the gaskets and perimeter seals that keep moisture out of the sealed assembly. The first symptom is usually a haze or condensation between the panes, then actual water intrusion at the frame. On the west-side hills this happens faster than most owners expect.
- Worn rollers and tracks on PGT aluminum sliding glass doors. Grit, salt corrosion, and years of use wear the rollers flat and pit the track. The door starts sticking, then stops latching cleanly, then the top rail starts to rack. A door that needs a shoulder to close is telling you the hardware is done, not that the door frame is bad.
- Water pooling at the frame and sill on impact-rated units. This is almost always a detailing problem, not a PGT defect. Weep holes packed with debris, flashing that was lapped wrong at installation, or a sill that was set without enough drainage slope all trap water. Pooling water at a sill is a flashing and drainage conversation before it’s a window conversation.
- Screen frame and insect-screen track corrosion. Stainless and aluminum screen frames pit in coastal air, especially on west-facing exposures where the salt spray lands hardest. Tracks loosen, screens sag, and hardware seizes.
- Condensation read as seal failure. Not every foggy pane is a failed seal. Surface condensation from interior humidity is common in tight, well-insulated San Francisco homes. Haze that won’t clear, or moisture actually trapped between the panes, is the seal failure. The two need different fixes, and knowing which one you have saves real money.
PGT Parts & Our Repair-vs-Replace Approach
We use genuine PGT replacement glass, sashes, rollers, and hardware wherever those parts are available. For discontinued or non-structural components – screen hardware, trim pieces, certain tracks – we source a matched aftermarket equivalent and tell you exactly what’s going in the opening. We don’t claim to stock PGT parts locally; each job is sourced to the specific unit and series, which means the right part instead of the closest one.
Repair-versus-replace is where an honest read matters most. A single failed seal on an otherwise sound WinGuard unit can often be reglazed. A unit that has lost sealed-unit integrity across multiple panes, or where water has compromised the frame, is usually an honest replacement call rather than repeated patching. When the frame and flashing are sound and the failure is isolated to a gasket or hardware, repair is the right answer. When it can’t be made right in the wall, replacement is. We tell you which one you’re looking at, and why. Call (866) 320-2646 and we’ll walk through what your unit is actually doing.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT series – WinGuard aluminum, WinGuard vinyl, Estate Collection vinyl, or aluminum sliding glass door – and confirm whether the symptom is a seal, gasket, hardware, drainage, or flashing issue. We check weep holes and flashing as part of the call, not as an afterthought.
- 2
Repair or installation. If the unit can be reglazed or reset, we use genuine PGT glass, sashes, rollers, and hardware. If new installation is the answer, we specify the impact-rated product family that suits the opening and coordinate the order.
- 3
Test. We cycle sliding doors, check latching and alignment, verify drainage and weep-hole function, and confirm the unit is sealing clean against the frame before we call it done.
- 4
Warranty. Every job is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. That’s in writing, not assumed.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in San Francisco
We work with the PGT product families most common on San Francisco homes and high-rises:
- PGT WinGuard Aluminum Impact Windows – seal, gasket, glass, and hardware service; full replacement where the unit is past repair.
- PGT WinGuard Vinyl Impact Windows – sash, glazing, and frame service suited to the window’s impact rating.
- PGT Estate Collection Vinyl Windows – reglazing, gasket replacement, and hardware work.
- PGT Aluminum Sliding Glass Doors – roller replacement, track service, latching and alignment corrections.
If you’re not sure which series you have, a close look at the frame or the visible logo tells us fast. We service and install across the city, from pre-1906 row houses to newer downtown builds.
We Also Service These Brands
PGT is one of many product lines we work with. Groundwork Construction Co. of San Francisco also services and installs KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures and hardware – so a single project can cover the whole scope without a hand-off. That matters on a full kitchen or bathroom remodel, where the window, the cabinets, and the fixture schedule all land in the same room.
FAQs – PGT Construction Service in San Francisco
No. We are an independent PGT service provider and are not affiliated with or authorized by PGT. That independence is the point: we’re free to source the parts that actually fit your unit and give you an honest repair-versus-replace call without a manufacturer script in the way. Call (866) 320-2646 for a free estimate.
We use genuine PGT replacement glass, sashes, rollers, and hardware where those parts are available, and matched aftermarket parts only for discontinued or non-structural components. When we use a non-OEM part, we tell you before we install it and explain why. Call (866) 320-2646 to talk through the parts for your specific unit – estimates are free.
It depends on the job. Hardware service like roller or gasket replacement on a sliding door is often a single visit. A reglaze or a full window replacement requires the right part and a scheduled appointment. We give you a realistic timeline in the estimate and hold to it. Call (866) 320-2646 to schedule your free estimate and get a clear answer for your unit.
We service and install PGT WinGuard Aluminum Impact Windows, PGT WinGuard Vinyl Impact Windows, PGT Estate Collection Vinyl Windows, and PGT Aluminum Sliding Glass Doors. If you have a different PGT series, tell us what you see on the frame and we’ll confirm coverage. Call (866) 320-2646 for a free estimate.
Warranty terms are set by PGT and depend on the product and the service performed. Using genuine PGT parts and following manufacturer-specified installation practices is the surest way to keep your unit as close to original spec as possible. We’re independent and not a PGT warranty administrator, so we always recommend confirming any warranty question with PGT directly. We can tell you exactly what our work will involve; call (866) 320-2646 for a free estimate.
Impact window installation runs $9,440 – $29,500 for a typical scope, and standalone repair work is priced after diagnosis. For context on projects that include PGT windows and doors, here are the market ranges we work from in San Francisco:
| Service | Typical Range (San Francisco) |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
| Roof Replacement | $9,440 – $23,600 |
| Impact Window Installation | $9,440 – $29,500 |
These are ranges, not a quote. Call (866) 320-2646 for an exact number – estimates are free.
Book Your PGT Service in San Francisco, CA
Whether it’s a fogged WinGuard unit, a dragging sliding door, or a full window-and-door replacement tied to a kitchen or roof project, our San Francisco team can give you a straight read and a free estimate. Calls are answered by a live person, 24/7, and every job is covered by our 730-Day Done Right Promise. Call (866) 320-2646 to get started.
Written by the team at Groundwork Construction Co. of San Francisco.