Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in San Bruno, CA
We provide independent PGT service across San Bruno, and the one thing that makes our PGT work here different is how much attention we give the building envelope. In the 94066 zip code, fog-driven moisture and strict post-2010 seismic retrofit rules mean window and door replacements have to flex with the structure without letting water in. Groundwork Construction Co. of San Francisco installs and services PGT WinGuard Aluminum, WinGuard Vinyl, Premier Series windows and PGT sliding glass doors. We are not affiliated with PGT or an authorized dealer; we’re an independent contractor trained on their products. Call (866) 320-2646 for a free estimate.
Why San Bruno Residents Choose Us for PGT Service
We know the PGT lines that end up in San Bruno homes, and we know exactly where they fail. Fogged dual-pane WinGuard units, corroded hardware on aluminum frames, sliding doors that bind on a worn track after a few seasons near the coast: we see these from the Crestmoor neighborhood to the flat blocks just off El Camino Real. Our technicians have up to 12 years of experience, and every job sits under our 730-Day Done Right Promise. If it’s not done right, we make it right.
Where OEM parts are still made, we source them to keep your warranty compliant. On older models that PGT no longer supports, we fit quality aftermarket components that hold up. All technicians are background-checked and arrive in uniform, and upfront pricing means the number in your written quote is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in San Bruno
- Fogging on dual-pane WinGuard units. San Bruno’s fog belt and steady onshore winds cycle hot and cold across the glass, and that thermal stress breaks the perimeter seal over time. Once the seal fails, moisture gets in and the window clouds from the inside.
- Water infiltration at sills and heads on vinyl windows. When factory flashing is too shallow for wind-driven rain off the Pacific, water pushes in at the sill and head joints. On a home with a stucco or wood exterior, that shows up as soft sheathing and peeling paint long before you see a drip inside.
- Corrosion on aluminum window hardware. Salt air and marine moisture eat at fasteners, hinges and locks on WinGuard Aluminum frames. A five-year-old window can have handles that stick and screws that won’t budge.
- Sliding doors that stick or drag. PGT sliding glass doors collect grit on the track, and in the coastal environment the rollers wear faster. Track misalignment makes the door bind, and if you force it, the frame racks.
- Leaks at the rough opening after replacement. In San Bruno, a window installed without allowance for structural movement can crack the seal at the frame edge during the small shifts a retrofitted home still sees. That gap is where the fog gets in.
PGT Service in San Bruno: What Local Conditions Mean for Your Equipment
The 2010 PG&E gas pipeline explosion in the Crestmoor neighborhood triggered a mandatory seismic retrofit and rebuilding wave that still shapes how San Bruno permits and inspects work today. That history has a direct effect on window and door projects: the 94066 zip follows strict post-2010 retrofit guidelines, so a replacement has to be engineered to let the structure move without opening a gap in the building envelope. A window that would be fine in a static wall can crack the seal here if the installer doesn’t account for movement, which is why proper flashing and weather-resistant detailing matter on every San Bruno remodel. Older Crestmoor homes that predate the retrofit wave need the same care. When we quote a PGT window replacement in San Bruno, the flashing detail and structural allowance are part of the line item, not an afterthought.
PGT Models & Products We Service in San Bruno
We work on PGT WinGuard Aluminum, PGT WinGuard Vinyl, PGT Premier Series windows and PGT sliding glass doors. Each job starts with a decision: repair or replace. If the frame and sash are structurally sound and you have one failed unit, we replace the insulated glass unit. If there’s extensive rot or several failed seals, replacement usually costs less over the long run. We source OEM parts when PGT still makes them and high-quality aftermarket components for older models where OEM parts are discontinued. Parts are ordered per job; we don’t claim to stock PGT parts locally.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in San Bruno
Here’s what a typical San Bruno project runs, with the ranges we quote across our San Francisco market:
| Service | Price range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $470 – $2,125 |
Cost comes down to how many units you’re replacing, the frame material (aluminum vs. vinyl), whether impact glass is required, and how much custom flashing and structural allowance the Crestmoor retrofit history demands. A free estimate includes a walk-through, a written line-item quote, and an honest repair-vs-replace call. Call (866) 320-2646 for an exact quote. Estimates are free.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in San Bruno
No. Groundwork Construction Co. of San Francisco is an independent contractor and is not affiliated with or authorized by PGT. We install and service their products and are trained on their models, but any warranty is PGT’s own. Call (866) 320-2646 to schedule a free estimate.
Often we repair: if the frame and sash are sound and one glass unit has failed, we replace the insulated glass unit rather than the whole window. Full replacement makes more sense when there’s rot or several failed seals. Call (866) 320-2646 for a free assessment.
Yes. The 94066 zip follows strict post-2010 retrofit guidelines, so a replacement has to be installed to allow structural movement without breaking the weather seal. That changes how much flashing and structural allowance goes into the job. We build that into the quote, not on top of it.
We service WinGuard Aluminum, WinGuard Vinyl, Premier Series windows and PGT sliding glass doors. Call (866) 320-2646 with your model or a photo and we’ll tell you what we can do.
Window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000 in our San Francisco market; roof repair runs $470 – $2,125. The Crestmoor retrofit history can push a job toward the high end. Call (866) 320-2646 for an exact quote. Estimates are free.
Service Areas Near San Bruno
Alongside San Bruno, we work across the Peninsula and North Bay neighborhoods, including San Francisco, PGT service reach into Pacifica and Daly City, plus Tiburon and Mill Valley. Wherever the fog hits, the same envelope rules apply. Learn more about our San Bruno service area.
Book Your PGT Service in San Bruno Today
If your PGT windows are fogging or your sliding door is dragging, get a straight answer on repair-versus-replace. We answer the phone live, 24/7, and bring background-checked uniformed technicians to your door. Call (866) 320-2646 for a free estimate and upfront pricing with no surprises.
Written by the team at Groundwork Construction Co.