Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru construction service in San Francisco for homeowners whose entry doors have started leaking, sticking, cracking or rotting. Our technicians know the Therma-Tru model lines by name and know exactly how Fiber-Classic, Smooth-Star, Classic-Craft and American Style doors behave after years in coastal fog. Because we work as an independent service provider and not through Therma-Tru’s dealer network, we recommend repair or replacement based purely on what the door needs. Call (866) 320-2646 for a free estimate.
An important note up front: Groundwork Construction Co. of San Francisco is not affiliated with, sponsored by or authorized by Therma-Tru. We’re an independent contractor that services and installs their products. That independence is the point. We source OEM and quality aftermarket components directly and aren’t locked into one parts channel, so the advice you get is about your door, not a dealer’s quota. San Francisco doors take a beating that most of the country never sees, and the guidance below reflects that.
Why Trust Groundwork Construction Co. of San Francisco for Your Therma-Tru Construction?
Our technicians have up to 12 years of experience with fiberglass and steel entry systems, and they’ve worked on enough Therma-Tru slabs to recognize a failed sweep by feel and a swollen bottom rail by the way a door drags. That familiarity matters. Therma-Tru doors are engineered assemblies, and the difference between a five-year fix and a five-month callback usually comes down to whether the technician understood how the slab, sill and hinges interact.
We use OEM-compatible parts on any door still in production: Therma-Tru sills, sweeps, weatherstrip, hinges and lock-rail components. When a part is discontinued, we move to quality aftermarket hardware and tell you exactly why. Every job is covered by our 730-Day Done Right Promise, so if the seal fails or the door binds again inside that window, we make it right. We work warranty-safe, which means our methods don’t give a manufacturer grounds to void your existing coverage. You get a live person on the phone 24/7, and every technician arrives background-checked and in uniform. Upfront pricing, in writing, before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in San Francisco
Most of the Therma-Tru calls we get in San Francisco trace back to moisture and the daily expansion-contraction cycle of marine air. Here’s what we see, and why it happens.
- Hairline cracks on Fiber-Classic and Smooth-Star slabs. Years of swelling and shrinking in fog cycles stress the slab along the lock rail and hinge side. The cracks aren’t cosmetic; they let moisture into the substrate. Caught early, they can often be sealed and refinished.
- Rot at the bottom rail and door bottom edge. Once the factory finish wears through at the threshold, fog and wind-driven rain wick straight into the fiberglass and composite substrate. A soft spot you can press with a screwdriver usually means the rail is gone.
- Sagging or binding Classic-Craft doors. These are heavier slabs, and when they’re hung on original hardware, hinge screws pull out of the jamb over time. The door drops, drags and stops sealing. Re-setting hinges into solid wood is the fix, not cranking the strike plate.
- Failed weatherstrip and sill seals. Compressed, cracked or hardened weatherstrip lets in the wind-driven rain and fog San Francisco is known for. Interior drafts and water staining at the threshold are the tell. This is the most common and most fixable Therma-Tru failure we encounter.
- American Style steel doors with corroded fasteners. Standard fasteners on the west-side hills corrode fast in salt air. We spec stainless and galvanized hardware even on small jobs so the door outlasts its fittings.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We don’t keep a warehouse of Therma-Tru parts and won’t pretend we do. For each job we source what’s needed after diagnosis: OEM sills, sweeps, weatherstrip, hinges and lock-rail components for doors still in production, and quality aftermarket hardware when an OEM part is discontinued. That takes a few days, not weeks, and it means you’re not paying for a part that sat on a shelf for years.
Repair beats replacement when the slab, rails and finish are intact. If the bottom rail has already rotted through or the slab cracking can’t be reliably re-bonded and refinished, replacement is the honest call. We tell you which one you’re facing before any work starts, with a written number you can compare. Call (866) 320-2646 to get that diagnosis scheduled – estimates are free.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab, both rails, hinge plates, sweep, sill and weatherstrip, then trace where water is entering. Therma-Tru doors often fail at two points at once, so we don’t stop at the first.
- 2
Repair or install. Repairs use OEM or quality aftermarket components matched to your specific series. New installs are set plumb and square, with flashing and weatherproofing spec’d for San Francisco’s fog and salt exposure.
- 3
Test. We operate the door through its full swing, check the seal against light and feel, and confirm no binding or drag at any point in the arc.
- 4
Warranty. The work is covered under our 730-Day Done Right Promise. If the seal fails or the door binds inside that window, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in San Francisco
We work on every major Therma-Tru entry line:
- Fiber-Classic – fiberglass entry doors, the series most common in the city’s older homes.
- Smooth-Star – smooth fiberglass doors, popular for their clean, paintable face.
- Classic-Craft – the premium fiberglass collection, and the heaviest slab we hang.
- American Style – steel entry doors, often seen on multifamily and residential hotel stock.
We service and install all four with OEM-compatible parts and warranty-safe methods, and we’ll tell you up front when a discontinued part forces an aftermarket substitute.
We Also Service These Brands
Therma-Tru is one brand in a much larger cabinet of work. We also remodel kitchens and bathrooms with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, backed by the same brand partners and the same 730-Day Done Right Promise. If your project touches doors, kitchen or bath, you’re working with one contractor from foundation to finish line, not a rotating cast of subcontractors.
FAQs – Therma-Tru Construction Service in San Francisco
No. We are an independent Therma-Tru service provider, not an authorized dealer, and we’re not affiliated with or sponsored by Therma-Tru. That independence lets us recommend repair or replacement based purely on what the door needs rather than what a dealer network wants to sell. Call (866) 320-2646 to discuss your door.
Yes, whenever the part is still in production. We source OEM Therma-Tru sills, sweeps, weatherstrip, hinges and lock-rail components directly. When a part has been discontinued, we use quality aftermarket hardware and explain why. Call (866) 320-2646 with your model and we’ll tell you what’s available.
Most repair work – a sweep, sill or weatherstrip replacement, or a hinge re-set – is completed in a single visit once parts are in hand. Full door and frame replacement typically runs a day. We schedule around parts lead time and tell you the timeline up front, with upfront pricing, so there are no surprises. Call (866) 320-2646 to get on the schedule.
We cover all four major lines: Fiber-Classic and Smooth-Star fiberglass doors, the premium Classic-Craft collection, and American Style steel entry doors. If you’re not sure which you have, a photo of the door and the label on the edge of the slab usually tells us. Call (866) 320-2646 and we’ll help you identify it.
Our methods are warranty-safe, so a service visit won’t give a manufacturer grounds to void your existing coverage. We use OEM-compatible parts and standard installation practices. Where a repair might affect coverage, we tell you before we start. Call (866) 320-2646 with any warranty questions.
Typical Therma-Tru service work in San Francisco runs a few hundred dollars for a sweep, sill or weatherstrip repair and climbs into the low thousands for a full door and frame replacement, depending on the series and condition. Here are market ranges that show how door and exterior work is priced in the city:
| Service | Price Range |
|---|---|
| Roof Repair | $470 – $2,125 |
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
Call (866) 320-2646 for an exact quote on your Therma-Tru door – estimates are free.
Book Your Therma-Tru Service in San Francisco, CA
Whether your Fiber-Classic is leaking at the threshold or your Classic-Craft has started to drag, we can diagnose it and give you a straight answer on repair versus replace. Call (866) 320-2646 to schedule a free estimate. A live person answers around the clock, pricing is upfront, and the work is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of San Francisco.