Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in San Bruno, CA
We provide independent Therma-Tru service across San Bruno, from Crestmoor rebuilds to original post-WWII entries in 94066. The thing that separates our Therma-Tru work here is fit and flashing: on the same block, one door opening was framed to post-2010 shear-wall standards and the next is still the original 1950s rough opening, and each needs a different detail. We’re an independent specialist, not affiliated with or authorized by Therma-Tru, so our recommendations follow what your slab, frame and wall actually need. Call (866) 320-2646 to schedule a free estimate.
Why San Bruno Residents Choose Us for Therma-Tru Service
We work on Therma-Tru doors constantly across the Peninsula, and that matters in San Bruno because these doors fail in specific, predictable places. Fiber-Classic slabs bubble and chalk at the bottom rail. Smooth-Star frames trap water behind a poorly shimmed threshold. Classic-Craft hardware goes out of alignment when the slab swells in damp summer air. We know where to look before we pull a single screw.
Parts matter too. We source genuine Therma-Tru replacement glass units, hinges, sills and factory-matched finish components whenever they’re made, and quality aftermarket hardware only when an exact OEM match doesn’t exist. We don’t claim to keep local stock; every part is ordered to the job. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and quotes are upfront with no surprises. Our technicians bring up to 12 years of experience to each San Bruno door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Solve in San Bruno
- Finish failure at the bottom rail and lock rail. Wind-driven moisture from the marine layer wicks behind trim and caulk, and the factory finish on fiberglass skins bubbles, chalks or stains dark. San Bruno’s steady onshore winds push that water into seams a drier climate never stresses.
- Thresholds and frames that were never flashed or shimmed right. Plenty of San Bruno entries were reworked during earlier retrofits, and the sill pan now traps water. The door starts dragging or sticking as the seasons turn – a slow symptom of a water problem, not a hinge problem.
- Lock and handle hardware that loosens and misaligns. Multi-point and standard locksets shift when the slab swells and shrinks with damp air, so the latch and deadbolt bind. It’s a common call in San Bruno homes where the door is in daily use and the fit was never quite right.
- Fogged glass lites and sidelites. Failed seals in older glazing units show up as condensation, drafts and visible cloudiness. On fiberglass Therma-Tru doors, the glass usually outlasts the seal by years before the problem becomes obvious.
- Sticking slabs in foggy summers. A door that closes fine in October can bind every morning in July. In San Bruno’s fog belt, this is less about the door being “warped” and more about moisture in the frame and slab that a proper flashing and sill correction addresses.
Therma-Tru Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno’s door openings aren’t uniform, and the 2010 PG&E pipeline explosion in the Crestmoor neighborhood explains why. The rebuilding and mandatory seismic retrofit wave that followed framed many Crestmoor-area openings to newer shear-wall and hold-down standards, with flashing built to match. Stroll a few blocks into the surrounding post-WWII housing and you’ll find original rough openings from the 1940s and ’50s, sometimes with foundation bolting, shear walling and chimney bracing still pending. For a Therma-Tru owner, that means the same repair can be a straightforward reseal on one street and a full rough-opening correction on the next – within the same 94066 zip code. We size the flashing detail, shim the threshold and select the replacement parts according to what the wall actually has, not a generic spec.
Therma-Tru Models & Products We Service in San Bruno
We handle Therma-Tru Fiber-Classic door slabs and prehung entry systems, Smooth-Star fiberglass entry and patio doors, Classic-Craft American and Rustic collection doors, and entry door glass with sidelites in factory finish systems. For each San Bruno job we confirm the model and finish, then order genuine Therma-Tru replacement glass, hinges, sills and matched finish components where they exist. Where the factory part is no longer made, we fit quality aftermarket hardware and tell you exactly why. Repair of a sound slab and frame is usually the honest call. Full replacement is warranted when the bottom rail, frame or glazing is structurally compromised.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in San Bruno
Door and entry work usually sits inside a wider project, so here are the San Francisco-market ranges we quote against. Upfront pricing, no surprises – the number you see is the number you pay.
| Service | Typical range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Full Kitchen Remodeling (entry-adjacent) | $16,520 – $53,100 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Bathroom Remodel | $10,620 – $33,040 |
Cost depends on whether we’re refinishing a sound slab or correcting a rough opening, the glass and hardware selected, and any flashing or sill work the frame needs. Every free estimate is a written line-item quote, and we pull the permits and pass the inspections. Call (866) 320-2646 for an exact quote – estimates are free.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in San Bruno
Will a new Therma-Tru entry door need special flashing in San Bruno’s fog belt? Yes. The marine layer and steady onshore wind drive moisture into seams, so we detail flashing and the sill pan to shed water rather than trap it. Skipping that step is what causes the bubbling and staining we see on failed San Bruno doors. Call (866) 320-2646 to schedule a free estimate.
Do homes rebuilt or retrofitted after the 2010 Crestmoor explosion need different Therma-Tru fit? Sometimes. Post-2010 Crestmoor openings often follow newer shear-wall and hold-down standards, while nearby post-WWII homes still have original rough openings. We measure the actual opening before ordering anything.
Can a fogged or failed glass lite in my Therma-Tru door be repaired, or does the whole door need replacing? A failed lite can usually be replaced on its own when the slab and frame are sound. If the glazing failure has compromised the frame or bottom rail, replacement becomes the honest call. We’ll tell you which you’re looking at.
How do I know whether to refinish or replace a Therma-Tru fiberglass door in San Bruno? If the skin is intact and the failure is finish and hardware, refinishing is often enough. Rot in the bottom rail, a warped frame or failed glazing points to replacement. We check all three before recommending anything.
Is Groundwork Construction Co. of San Francisco authorized by Therma-Tru? No. We’re an independent Therma-Tru service provider, not manufacturer-affiliated or authorized. That’s deliberate: every recommendation follows what your door, frame and opening actually require. Call (866) 320-2646 for a free estimate.
Service Areas Near San Bruno
Alongside San Bruno, we serve homeowners across San Francisco, Pacifica and Daly City, plus Tiburon and Mill Valley. All of it sits in the same coastal fog belt, so the door details carry over. See our San Bruno service area for coverage, and learn more about our full Therma-Tru service.
Book Your Therma-Tru Service in San Bruno Today
Call (866) 320-2646 to schedule your free estimate. Live person, 24/7. Every San Bruno project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right – built to last, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco.