Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Corte Madera, CA
We provide independent CGI service across Corte Madera, from the flood-zone flats near Corte Madera Creek up to the hillside lots above Town Center. What makes our work here different is that CGI window and door projects in Corte Madera have to satisfy two sets of rules at once: FEMA flood-elevation and venting requirements down low, and seismic bracing on the slopes. Groundwork Construction Co. of San Francisco works with CGI’s 2000, 4000, and 5000 Series lines and knows both code environments cold. Call (866) 320-2646 and we’ll set up a free estimate.
Why Corte Madera Residents Choose Us for CGI Service
CGI is a Florida-based manufacturer, so its product line is built around heat, humidity, and hurricane ratings. That’s a good thing for Corte Madera, but only if the install accounts for what this town actually does to a window. Salt-laden marine air corrodes hardware and frames on hillside homes faster than the manufacturer’s coastal rating suggests. Wet winters push water against seals and flashing in ways a Miami test protocol doesn’t fully model. We’ve handled enough of these units locally to know where CGI products hold up and where they need extra attention at install.
We order OEM parts to keep CGI’s warranty intact and ensure a proper fit. When a unit is old enough that OEM parts are discontinued, we source high-quality aftermarket equivalents that meet or exceed original specs. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person 24/7, so you’re not waiting until Monday when a sill starts leaking. We’re an independent, non-authorized provider, which means we’re free to tell you when repair is the smarter move and when replacement is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Corte Madera
- Window seal failure and water intrusion. Corte Madera’s wet winters punish perimeter seals, and the problem gets worse on the low-lying flats near the creek and Town Center where flood-zone soils stay saturated longer. Once water gets behind the seal, the interior sill and framing start taking damage.
- Corrosion of hardware and frames. Hillside homes above town sit in heavier marine air exposure than the flats, and salt settles on hinges, handles, and frame welds. We inspect for corrosion at every service call rather than waiting for a handle to seize.
- Improper flashing on older ranchers. Many mid-century Corte Madera ranchers and split-levels were flashed to 1960s standards, not to what a 5000 Series impact window needs. Bad flashing around a new CGI window causes leaks and, over a few seasons, structural damage to the wall cavity.
- Fogging in dual-pane units. Fogging between panes is a failed seal, plain and simple. Temperature swings and humidity in Corte Madera accelerate seal deterioration, and once a unit fogs, no amount of cleaning brings the clarity back.
- Roof and window interface leaks. A lot of CGI window problems in Corte Madera are actually roof problems. Failed roof-to-wall flashing above a window lets water run down behind the frame, and you’ll blame the window for a leak the roof caused.
CGI Service in Corte Madera: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes our CGI work more than any other: replacement windows in Corte Madera’s designated flood zone near Corte Madera Creek have to meet specific elevation and flood-vent requirements, and that requirement often pushes homeowners toward CGI’s impact-rated models even when they’re nowhere near a high-wind zone. On a hillside lot blocks away, the same window may need seismic bracing and a different flashing detail. We’ve seen two homes on the same street need completely different install approaches because one sits in the flood plain and one sits above it. That dual condition, flood-zone ground-up work on the flats and slope-stability work on the hills, is what makes Corte Madera different from every neighboring town. If you’re planning a Window Replacement or Impact Window Installation in Corte Madera, the first question isn’t which model, it’s which side of the grade line you’re on. Our Corte Madera service area page covers the coverage footprint in more detail.
CGI Models & Products We Service in Corte Madera
We service and install across the CGI line, including the 4000 Series aluminum windows, the 2000 Series vinyl windows, the 5000 Series impact windows, and CGI sliding glass doors, which are common on Corte Madera hillside decks facing the bay. Parts sourcing works the same way on every model: we order OEM first to protect the warranty and the fit. Where OEM parts are discontinued, we use high-quality aftermarket equivalents that meet or exceed original specs. We don’t claim to stock CGI parts locally. Each job gets sourced to order so the part matches the unit, not whatever happened to be on a shelf. For CGI windows older than 2000 with failed seals, replacement usually beats repair on cost.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Corte Madera
Window and door work in Corte Madera runs higher than inland Bay Area pricing because flood-zone elevation requirements and hillside access add labor and documentation to the job. Here’s what typical line items look like:
| Service | Price Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
| Roof Repair | $400 – $1800 |
What drives the number: unit size and series, whether your home sits in the flood-zone flats or on a slope, whether the flashing and framing need rebuild, and permitting. Our free estimate includes an on-site assessment of seal and flashing condition, a written line-item quote, and a straight recommendation on repair versus replacement. We use upfront pricing, no surprises, and offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (866) 320-2646 for an exact quote on your Corte Madera project.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Corte Madera
Often yes, and not for wind reasons. If your home sits in the flood zone near Corte Madera Creek, elevation and flood-vent requirements can make CGI’s 5000 Series impact windows the practical choice for replacement. The impact rating is a bonus; the flood compliance is the driver. Call (866) 320-2646 to find out which side of that line your property is on.
Fogging means the hermetic seal between panes has failed, and resealing a failed dual-pane unit almost never holds. On pre-2000 CGI windows, replacement is usually the cost-effective route. Newer units sometimes have a warranty path worth checking first. We’ll tell you straight which one applies to yours.
Flood-zone designation changes the elevation of the openings, the venting requirements, and how flashing and waterproofing are detailed around the frame. It’s not a cosmetic difference. An install that would pass on a hillside lot may fail inspection on the flats. We pull the permits and handle the inspection side so you’re not chasing the county.
Failed roof-to-wall flashing above window openings is the big one, followed by worn roof underlayment at the eave line where windows meet the roof plane. Wet winters and marine air wear both faster here than inland. If a window leak turns out to be a roof issue, we handle Roof Repair alongside the window work so the fix actually holds. Call (866) 320-2646 to schedule an assessment.
Yes. Hillside lots above town need seismic bracing, proper anchoring, and flashing detailed for slope drainage, and we account for all three. The window install and the structural reality of the slope have to be planned together. A mid-century rancher with fogging units and sill water stains usually needs seal assessment, a flashing and drainage check, and then either resealing or replacement with units that meet Corte Madera’s flood-zone standards, and that’s the sequence we work through.
Service Areas Near Corte Madera
We handle CGI window and door work throughout Corte Madera and the surrounding Marin and San Francisco communities, including Larkspur, Mill Valley, Tiburon, Tamalpais-Homestead Valley, and San Francisco. Each town has its own building department quirks, and we work with all of them.
Book Your CGI Service in Corte Madera Today
Whether it’s a fogged-out ranch window on the flats or an impact-rated replacement on a hillside deck, we’ll give you a written, line-item estimate and a real recommendation. Call (866) 320-2646 to schedule your free estimate in Corte Madera. A live person answers around the clock.
Written by the team at Groundwork Construction Co. of San Francisco.