Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Corte Madera
Corte Madera homeowners call us for fence work that has to hold up through wet winters and a town that changes elevation fast. We connect you with independent local pros who know why a fence line on the creek flats needs different footings than one up on the hillside, and who pull the right permits before the first post goes in. Call (866) 320-2646 and a live person answers, day or night, to set up your free estimate.
Why Groundwork Construction Co. of San Francisco Is Corte Madera’s Preferred Fence Installation Company
Our Fence Installation team has earned a strong local reputation in Corte Madera by treating the town’s flood-plain and hillside split as the starting point, not an afterthought. Homeowners near the Town Center and up off the flats tell us the same thing: the last crew never asked about drainage or slope, and the fence paid for it two seasons later. We ask those questions up front.
Calls are answered by a live person 24 hours a day, so a question about a leaning gate or a permit doesn’t wait until Monday. Technicians arrive background-checked and in uniform, and every project is covered by our 730-Day Done Right Promise. Pricing is fixed upfront in writing, so the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Corte Madera
Wood Fence
Wood still suits the mid-century ranchers and split-levels that make up so much of Corte Madera’s housing stock. On older flats near the creek, we plan deeper, better-drained footings so the wood doesn’t soak at the base. A wood fence here runs roughly in line with the overall Corte Madera range for standard installs, and it’s a good fit for privacy where a lot backs onto a neighbor.

Chain Link Fence
Chain link is the practical choice on larger Corte Madera lots where the goal is a clear boundary and low upkeep rather than screening. It holds up well on hillside parcels where a lighter structure puts less load on sloped ground. We set the posts and gate hardware in writing before ordering, since a change after the fact means a re-order and a longer wait.

Vinyl Fence
Vinyl handles the marine-influenced wet winters around Corte Madera without the rot that eats wood at the post line. On the low-lying marsh and creek areas, it’s a smart pick because there’s no wood to swell and soften when the ground saturates. A typical vinyl install in Corte Madera runs $3,500 – $9,000.

Aluminum Fence
Aluminum is the material we lean on for the clean, custom look many Corte Madera rebuilds are after, and it pairs well with a privacy screen where a lot opens onto a view. Aluminum fences in Corte Madera typically land between $4,000 and $10,000 depending on height, spacing and gate count. Because custom panels are a long-lead item, we fix the layout and hardware in writing before the order goes out.
Trusted Brands We Service in Corte Madera
On the gate and screening side, we work with material partners we trust, and we’re glad to coordinate with brands like Therma-Tru and Andersen where a fence ties into a home’s exterior doors and sightlines. We don’t claim to keep parts on hand; the value is a fast, honest turnaround and a written spec that tells you exactly what’s being ordered and when it arrives. That discipline is what keeps a custom Corte Madera fence on schedule instead of stalled on a re-order.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Corte Madera Homes
- Shallow posts on the creek flats. In the low-lying areas near Corte Madera Creek, seasonal saturation and flood-zone drainage rules demand deeper, better-drained footings than a standard install delivers. Skip that and the posts lean by the second wet season.
- Hillside fences over an unaddressed retaining condition. On the hillside lots just uphill, slope movement racks gates and panels within a season. The fix is usually the ground behind the fence, not the fence itself.
- Panels ordered before the layout is fixed. Cheap aluminum or vinyl panels bought before the gate hardware and layout are settled in writing lead to a change order and a long re-order wait.
- Aging original framing and fences. With so much mid-century stock being remodeled and rebuilt, old fence lines often sit on footings that were never sized for today’s loads.
Pricing for Fence Installation in Corte Madera, CA
Pricing here is driven by the footing and drainage plan, not the panel style, and that surprises people. A creek-flats install with elevation and drainage detail can cost more than a same-length run on flatter, drier ground. Here’s the honest range for the two most-requested jobs in Corte Madera:
| Service | Typical Range in Corte Madera |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Your written quote is line-item and fixed before any material is ordered. Call (866) 320-2646 for a free estimate.
We Also Serve Cities Near Corte Madera
Fence work in Corte Madera often spills into the towns around it. We also serve homeowners in Larkspur, Mill Valley, Tamalpais-Homestead Valley and Tiburon, each with its own ground conditions and permit picture. Call and we’ll tell you straight what your lot needs.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Corte Madera
Yes. The low-lying flats near Corte Madera Creek sit in FEMA flood zones where posts, footings and grading must respect elevation and drainage rules, while hillside lots need retaining and slope-stability detail. That means the footing depth and drainage plan, not the panel style, often drives the permit set. Call (866) 320-2646 and we’ll walk you through what your lot triggers.
Because the panels aren’t the weak point – the footings are. In Corte Madera’s wet winters, a fence installed without accounting for the flood-plain or hillside water table shows up as leaning posts and heaving footings by the second season, especially where downslope drainage or creek-area saturation softens the soil around the post holes. A qualified local pro sets posts below the local frost-and-drainage line on properly sized concrete footings and gets inspection sign-off. Call for an exact quote.
The layout, gate hardware, post spacing and footing spec all need to be settled on paper first. Custom panels are long-lead, so a change after ordering means a change order and a long re-order wait that blows the schedule. We fix the price in writing before anything is ordered. Call (866) 320-2646 for a free estimate.
Often yes, because a gate is a load-bearing element and its posts and footings can fall under the same flood-zone or hillside review as the rest of the fence. Getting the gate spec into the permit set up front avoids a failed inspection later. Call and we’ll confirm what applies to your lot.
We put a fixed, line-item quote in writing once the layout, footings and materials are decided, and that number holds – no surprises once work starts. Because lead times, not labor, set the calendar on this tier, locking the price early keeps the job on schedule. Call (866) 320-2646 for your free estimate.
Written by the team at Groundwork Construction Co.