Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Daly City, CA
We provide independent Mr-Glass service across Daly City, from frameless shower enclosures to vanity mirrors and interior glass partitions. The difference here isn’t the glass itself; it’s what sits behind it. Daly City’s fog belt keeps wall cavities damp in a way that sunnier Peninsula towns never see, so our Mr-Glass work in Daly City starts with the wall, not the hardware. Call (866) 320-2646 for a free estimate.
Why Daly City Residents Choose Us for Mr-Glass Service
We work on Mr-Glass products every week, which means we know the model lines, the hinge patterns, and the failure points by sight. Because we’re an independent contractor, not a factory rep, we recommend the right glass type, trim, and hardware for your specific bathroom without steering you toward a catalog item that doesn’t fit. That matters in Daly City, where the housing stock runs from 1940s stucco bungalows to small apartment buildings with original single-pane windows, and no two bathrooms were built the same way.
Our technicians have up to 12 years of experience, and every visit is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. We source OEM-compatible and quality aftermarket parts matched to your actual enclosure, and we tell you honestly when a repair is the smarter call than a full replacement. Calls are answered by a live person, 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Daly City
- Corroded hinges on frameless shower enclosures. Daly City’s persistent fog keeps bathroom humidity pinned at high levels most of the year. That constant moisture drives an electrolytic reaction between mild-steel hinges and tempered glass, and the glass edge begins to chip at the pivot point long before the panel itself fails.
- Failed sweeps and silicone seals. Wind-driven damp air combines with poor ventilation in older Daly City homes, so the sweep along the bottom of a shower door breaks down, mold stains the silicone, and water escapes onto wood-framed bathroom subfloors. Left alone, that’s a rot problem, not just a leak.
- Mirror desilvering on exterior-facing walls. Vanity mirrors mounted on stucco walls that face the weather condense on the back side. The cool, damp wall surface eats the silver backing along the bottom edge, leaving a dark border that no amount of cleaning fixes.
- Sliding-door track wear in garages and additions. Interior glass closet and partition systems in older tuck-under garages and wood-framed additions take on moisture, and the rollers and tracks wear out fast once the framing starts moving.
- Wall-side moisture behind the enclosure. This is the one most homeowners miss. A sound-looking enclosure can hide a soft backer board, and the glass keeps failing because the wall behind it never dries out.
Mr-Glass Service in Daly City: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Mr-Glass job we do in Daly City: the fog belt keeps bathroom wall cavities damp long enough that glass enclosures and vanity mirrors fail from the wall side out. On the hillside streets off Mission and Westlake, the stucco exteriors hold moisture, the wall cavities stay cool and wet, and the glass is the last thing to show the problem. So any Mr-Glass shower or mirror install here has to start with verifying vapor barrier and backer conditions before the glass goes up. Inland installs often skip that step because they can. In Daly City, skipping it means the new enclosure fails the same way the old one did. That single step separates a repair that lasts from one that’s back to chipping within a couple of years.
Mr-Glass Models & Products We Service in Daly City
We handle the full Mr-Glass range: custom frameless shower enclosures in 3/8″ and 1/2″ tempered glass, sliding and hinged shower door systems, stock and custom mirror products including bathroom vanity and wall mirrors, and interior glass partition and closet door systems. We source OEM or quality aftermarket hinges, sweeps, seals, and rollers matched to the actual enclosure on your wall. Parts are ordered per job against the model and measurements, not pulled from local stock. On 1990s-vintage Mr-Glass enclosures with good glass and corroded hardware, hardware replacement is often the honest answer, and we’ll tell you when that’s the case.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Daly City
Pricing depends on the enclosure size, glass thickness, hardware type, and whether the wall behind it needs moisture repair first. These are the ranges Daly City homeowners see for our most-requested Mr-Glass work:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
A free estimate includes measurements, a look at the wall and backer conditions, and a written line-item quote with no change orders. Call (866) 320-2646 to schedule yours.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Daly City
Usually yes. If the glass panels themselves are sound and only the hinges, sweep, and seals have failed, we replace the hardware with properly matched parts and re-seal the return panel. The one condition is the wall cavity: if it’s damp behind the tile, we resolve that moisture source first, because a new hinge on a wet wall just starts the clock over. Call (866) 320-2646 for an assessment.
Yes, and the difference is measurable. San Jose’s drier air lets bathroom wall cavities dry out between uses, while Daly City’s fog belt keeps them damp, so hinges corrode faster, silicone breaks down sooner, and mirrors desilver along the bottom edge. The glass isn’t the weak point here; the moisture behind it is.
Yes, and that’s a standard part of our work on the slopes off Mission and Westlake. Exterior stucco walls on steep lots hold moisture, so we verify vapor barrier and backer conditions before the glass goes up. Tight lots and close-set neighboring walls can complicate access, but that’s a planning issue we handle at the estimate.
A walk-in shower installation in Daly City typically runs $4,500 – $12,000, with a shower replacement at $3,000 – $8,500 and a tub-to-shower conversion at $3,500 – $10,000. Wall repairs behind the enclosure push the number up when moisture damage is present. Call (866) 320-2646 for an exact quote; estimates are free.
Often it can, as long as the glass is undamaged and the enclosure can be re-hung on the new layout. We measure the panels against the new configuration and check for edge chips before committing. Reusing sound tempered glass saves real money on a Daly City bathroom remodel.
Service Areas Near Daly City
We provide Daly City service area coverage across ZIP codes 94014, 94015, 94016, and 94017, and our work extends to San Francisco, San Bruno, Pacifica, Mill Valley, and Tiburon. If you’re on the Peninsula or in the fog belt, our Mr-Glass service reaches you.
Book Your Mr-Glass Service in Daly City Today
Whether it’s a corroded hinge, a desilvered mirror, or a walk-in shower you’ve been putting off, call (866) 320-2646 to schedule your free estimate. A live person answers around the clock, and we’ll give you a written quote before any work starts.
Written by the team at Groundwork Construction Co. of San Francisco.