Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Daly City, CA: What It Costs and How Long It Takes
Window replacement in Daly City usually runs $4,500 to $15,000 for a typical whole-house project and takes one to three days of on-site work once the units arrive. Most of that range is set by how many openings you’re doing, the frame material, and whether the existing stucco and framing are sound enough to accept a new window without repair. Call (866) 320-2646 for a free on-site estimate and a written, line-item price before anything is ordered.
How our window replacement process actually runs, stage by stage
Window replacement has a rhythm, and knowing it takes the guesswork out of the week. Here’s the sequence we follow, what happens at each stage, and what you’ll be deciding along the way.
Stage 1: Measure and scope (day one, about 90 minutes)
We measure every opening, check the condition of the surrounding stucco, and look at how the existing frames were set into the wall. On older Daly City homes we’re often measuring openings that were cut in the 1940s to 1960s, and the framing isn’t always square. You’ll decide at this stage whether we’re doing a full-frame replacement or a pocket (insert) replacement, which changes both the cost and how much exterior finish gets touched.
Stage 2: Product selection and order (one to two weeks of lead time)
You pick frame material, glass package, and finish. We put it in writing. This is the longest stretch of the project because the units have to be manufactured and delivered. You’ll need to sign off on the order before production starts, so this is the stage where you want your questions answered, not after.
Stage 3: Prep and demo (first morning on site, three to five hours)
We lay protection over floors and furniture, pull the old sashes and frames, and inspect what’s behind them. This is where surprises live. On fog-exposed Daly City homes, we frequently find soft wood or failed flashing that wasn’t visible from the room side. You’ll get a call with a price before we do any repair work beyond the scope.
Stage 4: Install and seal (day one into day two)
New units go in, get shimmed and leveled, insulated at the gap, and sealed. Flashing and exterior sealant go on the same visit. Most single-family window replacement jobs in Daly City close out in a day for a partial set and two to three days for a full house.
Stage 5: Trim, finish, and walkthrough (final day)
Interior trim goes back, exterior caulk lines are finished, and we walk the job with you opening and closing every unit. Anything that isn’t right gets fixed on the spot or scheduled. The whole job is covered by our 730-Day Done Right Promise, so if something fails to seal or operate correctly down the road, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions that move your price happen in the first two stages. Here’s the honest trade-off on each.
- Vinyl frames: The most common choice for Daly City because vinyl doesn’t rust or corrode in salt air. It insulates well and holds up to fog, but it can’t be painted and the color choices are limited. Best fit for standard openings in a budget-conscious whole-house job.
- Fiberglass frames: Stronger and more dimensionally stable than vinyl, and it takes paint. Costs more, and it’s the better call if you have large openings or want a frame that won’t flex in wind-driven rain off the coast.
- Wood-clad frames (Andersen, Marvin): Real wood inside, protected cladding outside. It’s the premium look and matches period homes well, but it’s the top of the price range and needs the cladding checked occasionally in coastal conditions.
- Pocket vs. full-frame: A pocket replacement drops a new unit into the existing frame. It’s cheaper and faster. A full-frame replacement pulls the whole assembly out, which lets us correct rot, re-flash, and fix framing problems – often necessary on older Daly City stucco homes where the original frame has been soaking for decades.
- Glass package: Double-pane low-E glass cuts heat loss and fogging. On a south- or west-facing wall that catches the afternoon sun, it’s worth the upgrade. On a shaded north wall in the fog belt, the gain is smaller.
- Hardware and finish: Standard white and tan finishes keep the number down. Custom colors and upgraded hardware add cost but matter if you’re matching a stucco exterior that’s already painted.
What window replacement costs in Daly City, CA
Plan on $4,500 to $15,000 for a typical window replacement project here. A single window or two lands near the bottom; a full house with full-frame replacement and upgraded glass pushes toward the top. Here’s how the line items usually break down.
| Scope | Typical range |
|---|---|
| Single window, pocket replacement | $600 – $1,400 |
| Whole-house pocket replacement | $4,500 – $9,000 |
| Whole-house full-frame with rot repair | $9,000 – $15,000 |
| Upgraded glass or custom color | Adds to the above |
Five things push a job toward the high end: the number of openings, whether the existing frame is sound, how much stucco and interior trim has to be rebuilt, the frame and glass grade you pick, and whether the project needs a permit. A written estimate from us lists the unit, the install labor, disposal of the old windows, and the trim work as separate lines so you can see what you’re paying for. What it typically does not cover: structural repair discovered after demo, stucco patching beyond the immediate opening, and repainting. We quote those separately before we touch them so there are no surprise charges mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
Daly City has its own set of conditions that change how a window replacement goes, and they’re not the same as what you’d hit a few miles south. The housing stock is the first factor: dense rows of 1940s to 1960s stucco-over-wood-frame homes, many still carrying original single-pane windows that have been fogging up and leaking for decades. On the steep streets off Mission and near Westlake, we routinely find that water has been getting behind the original frames for years, and the wood framing around an opening has softened before anyone notices from inside. That’s rot repair, and it has to be handled before a new unit goes in. The persistent fog and wind-driven rain here also wear on exterior sealant and flashing faster than in the sunnier suburbs, which is one more reason a correctly flashed install matters here. Window replacement in Daly City touches the building envelope, so plan on pulling a permit and having the work inspected; we handle that as part of the job so the sign-off doesn’t stall your project. If your project sprawls into wider scope, this often fits inside a larger Windows & Doors in Daly City plan, and you can see the full range of what we do on our Windows & Doors service page. We cover the whole city, from ZIP 94014 through 94015, 94016, and 94017 – see our Daly City service area for the streets and neighborhoods we work.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – window replacement in Daly City
Most window replacement jobs here are one to three days of on-site work, plus one to two weeks of lead time for the units to be manufactured. A single window is often a half-day install. A full house typically runs two to three days depending on how much rot repair and trim work comes up after demo. Call (866) 320-2646 and we’ll give you a realistic schedule for your specific openings.
Yes – replacing windows generally requires a permit in Daly City, and the work gets inspected. We pull the permit and schedule the inspection as part of the job, so you’re not chasing the city on your own. Skipping the permit is the kind of shortcut that bites you at resale. Call (866) 320-2646 if you want a straight answer on your specific project.
In most pocket replacement jobs, yes – the plumbing and structure stay untouched because we’re working within the existing opening. Full-frame replacement is different: it opens the wall around the window, so on older homes we sometimes find rot or framing issues that need repair. We inspect before we quote, so you know which category your house falls into. Call (866) 320-2646 for an on-site look.
A single window replacement typically runs $600 to $1,400 depending on size, frame material, and glass package. Whole-house projects run $4,500 to $15,000. The biggest swing factor is whether we’re doing a pocket replacement or a full-frame job with rot repair. Call (866) 320-2646 for an exact quote – estimates are free.
Every window replacement we do is backed by our 730-Day Done Right Promise, one of the longer workmanship guarantees in residential construction. If the install isn’t right, we make it right. Manufacturer warranties on the units themselves are separate and pass through to you. Call (866) 320-2646 to talk through what’s covered.
Get a free window replacement estimate in Daly City
Call (866) 320-2646 to schedule a free on-site estimate for window replacement in Daly City. We measure every opening, check the condition of the surrounding stucco and framing, and hand you a written line-item price – no vague ranges, no change-order surprises. A live person answers around the clock, so you’re not waiting until Monday. If your project pairs with exterior work, homeowners often pair this with Vinyl Fence in Daly City or Aluminum Fence in Daly City to finish the yard at the same time.
Written by the team at Groundwork Construction Co.