Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Tiburon, CA
Concrete Driveways & Concrete Work in Tiburon usually runs $4,500 – $12,000 for a new pour and $5,000 – $14,000 when an old slab has to come out first, with most residential jobs taking three to five working days from demo to first drive. The number that actually matters here isn’t the finish, it’s access: on the hillside streets above downtown, a truck either reaches your pad or it doesn’t, and that single fact reshapes the bid. Call (866) 320-2646 and we’ll walk your driveway and give you a written line-item estimate.
How a concrete driveway actually gets built here
Concrete work rewards sequence, and Tiburon sites punish anyone who skips a step. Here’s the real order of operations we follow, with what you’ll be deciding along the way.
Day 1: Site walk, access plan, and demo
Before a single form goes down, we measure slope, check drainage fall, and figure out how a truck or pump gets within reach. On tight lots we plan material staging and dumpster placement first, because a chute that can’t reach the pad means a pump truck or a wheelbarrow relay, and both change the schedule. Demo of an existing slab typically takes one day and usually needs a dumpster permit through the town.
Day 2: Excavation, subgrade, and base
We strip the old base, regrade to the finished elevation, and compact Class II aggregate in lifts. This is where you decide thickness (4 inches for standard passenger traffic, 5 – 6 inches where a heavy vehicle parks) and whether rebar or fiber mesh goes in. On Tiburon slopes, we also build in the retaining edge or transition where the drive meets the garage apron.
Day 3: Forms, grade, and inspection
Forms are set to the final slope, and we confirm the fall away from the garage. If your job triggers a permit, this is when the inspector views the subgrade and forms before the pour. You’ll sign off on the layout, the joint pattern, and the finish before we pour.
Day 4: The pour and finish
We pour, screed, and cut control joints at the spacing that suits your slab dimensions so cracks land where they’re designed to. Finish is your call: broom for grip, light salt for texture, or an exposed aggregate band at the apron. Cure starts the moment we finish.
Days 5 onward: Cure and cure management
Concrete reaches usable strength in about seven days for foot traffic and roughly 28 days for full vehicle load, though most homeowners can park on a residential drive in a week. We’ll tell you exactly when to keep off it and how to handle the first rain. The whole job usually books as a three-to-five-day window, weather permitting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete choices you’ll actually make
- Standard broom-finish slab: the workhorse. Grippy, low-maintenance, and the least expensive per square foot. Best for shaded or gentle drives where looks aren’t the priority.
- Exposed aggregate: a pebble surface that hides tire marks and adds texture. It costs more and asks more of the finisher, but it handles Tiburon’s damp exposures gracefully.
- Reinforcement: fiber mesh is economical for light loads; rebar grid is the honest choice where heavy vehicles or a steep grade put the slab in tension. We’ll tell you which fits your use.
- Thickness: 4 inches for cars, 5 – 6 inches for trucks, trailers, or an RV pad. Going thicker is cheap insurance against cracking.
- Drainage and grade: a positive fall away from the structure matters more than any finish. On hillside pads we may add a channel drain or trench drain at the low point.
- Joints and sealant: control joints cut at the right spacing, plus a penetrating sealer after cure, keep water out of the slab and slow the surface wear.
If your project grows into a broader hardscape plan, it’s often part of a full Driveway & Pavers in Tiburon scope that ties the drive, walk, and apron together.
What Concrete Driveways & Concrete Work costs in Tiburon, CA
For a residential drive in Tiburon, expect $4,500 – $12,000 for a new pour and $5,000 – $14,000 when an existing slab has to be removed, hauled, and replaced. Those ranges hold for typical single-car and short two-car pads. A few things push a job toward the top or bottom of the band:
- Size and thickness: square footage is the first driver, and going from 4 to 6 inches on a long drive adds real material and labor.
- Access: this is the big one in Tiburon. If a truck or chute can’t reach the pad, a pump truck, crane-assist, or hand-cart relay can add a meaningful surcharge that has nothing to do with the concrete itself.
- Existing condition: a cracked, heaved, or root-damaged slab means demo and haul-off, which is the difference between the install range and the replacement range.
- Finish: broom is the baseline; exposed aggregate and decorative bands step up on labor.
- Grade and drainage: a steep slope or a low point needing a drain or retaining edge adds forming and sometimes engineering.
Every written estimate should spell out what’s included: excavation, base, reinforcement, forms, the pour, joint cutting, and cleanup. What it often doesn’t cover, and we’ll say so up front: haul-off of an oversized slab, permits, drainage hardware, or retaining walls if the grade demands them. That’s what “upfront pricing, no surprises” means in practice. Call (866) 320-2646 for an exact quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Tiburon homes specifically do to this job
Tiburon is a steep-hillside peninsula town where nearly every project is really a site-engineering problem, and driveways are no exception. On the winding streets above Main Street and around Belvedere, tight lots and hairpin drives mean we plan crane picks, pump trucks, and material staging before we ever price the concrete. A dumpster or truck that can’t reach the site has to be worked around, and that logistics reality – not the finish – is what separates a Tiburon job from a flatter Marin town. The older housing stock, from early-1900s shingle and stucco cottages near downtown to mid-century hillside homes on cantilevered pads, often pairs a new drive with a retaining wall or drainage correction. Marin’s fog belt and winter rain cycle moisture on south- and west-facing slopes, while salt air off Richardson Bay corrodes fasteners and metal edging – both reasons we spec a penetrating sealer and corrosion-resistant hardware. We handle your whole property under our Tiburon service area, and homeowners often pair a new drive with our Garage Conversion ADU in Tiburon or a New Detached ADU in Tiburon when the project grows into a bigger site move.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Tiburon
Most residential concrete driveway jobs take three to five working days from demo to finish, plus about a week of cure before you drive on it. Access constraints on hillside streets can add a day to staging or pump logistics. Call (866) 320-2646 to schedule your free estimate and get a firm timeline for your address.
Replacing a driveway in place often doesn’t require a permit, but new slabs, grade changes, or anything affecting drainage or a retaining structure may. We check with the town before work starts and pull what’s required – permits pulled and inspections passed.
Sometimes a sound, well-drained slab can be overlayed or resurfaced, but heaved, cracked, or root-damaged concrete usually needs full removal to hold up. We’ll tell you honestly which applies and what each path costs. Call (866) 320-2646 for an exact quote.
New pours run $4,500 – $12,000 and replacements run $5,000 – $14,000 for typical residential drives. Access, size, thickness, and finish are what move the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every concrete job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Get a free estimate on your Tiburon concrete driveway
A free on-site estimate for Concrete Driveways & Concrete Work in Tiburon starts with a walk of your drive, a look at access and drainage, and a written line-item number you can hold us to. Our technicians have up to 12 years of experience, and calls are answered by a live person, 24/7. Call (866) 320-2646 today.
Written by the team at Groundwork Construction Co.