Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in San Bruno: What the Job Actually Involves
Custom and geometric windows (arches, half-rounds, trapezoids, angles, circles, and true divided-lite patterns) are built to order, not pulled from a shelf. In San Bruno, most of these projects take 6 to 10 weeks from signed contract to final inspection, with 3 to 6 of those weeks spent in fabrication after your field measurements are approved. Budget $1,100 to $3,200 per custom unit, or $8,000 to $25,000 for a multi-window architectural project. Call (866) 320-2646 to schedule a free on-site estimate.
What surprises most homeowners here is the fog. A geometric unit is only as weather-tight as the flashing and sealant detailing around it, and San Bruno’s marine layer works on that perimeter every day of the year. Get the installation details right and a custom window is a fifty-year asset. Get them wrong and you’ll be chasing water stains on the interior drywall within two seasons.
Key takeaways
- Custom shapes run $1,100 – $3,200 per unit; whole-facade geometric projects land at $8,000 – $25,000.
- Fabrication lead time is the long pole: 3 – 6 weeks after field verification.
- Post-2010 seismic retrofits in Crestmoor often change what’s structurally possible in an opening.
- Marine-layer moisture is the #1 failure mode we correct in San Bruno custom window installs.
How We Build and Install Custom & Geometric Windows: The Real Sequence
Every project moves through five stages. Here’s what happens, how long it takes, and where you make decisions.
Stage 1: On-site measurement and scope (day 1, 2 – 3 hours)
We measure every opening to the rough frame, not the finish trim, and check the wall assembly for rot, prior water damage, and any structural condition that would limit the shape you want. At this visit you decide the window style, glass package, and interior/exterior finish. On San Bruno’s 1940s – 50s homes, this is also where we spot the original sheathing or a previous retrofit that will change the install plan.
Stage 2: Shop drawings and approval (days 2 – 10)
Your measurements go to the fabricator, who returns shop drawings showing exact radii, angles, muntin layouts, and operability for each unit. You approve or adjust these before anything is cut. This is your one clean chance to catch a radius that reads differently on paper than you pictured.
Stage 3: Fabrication (weeks 3 – 8)
Custom units are built to order. Lead time is 3 – 6 weeks depending on glass specification, finish, and complexity of the shapes. We confirm permit status during this window and, if your project touches a structural opening, schedule the inspection that has to happen before we close the wall.
Stage 4: Removal and installation (2 – 4 days)
We protect the floors and surrounding finishes, remove the old units, and inspect the framing. Rot gets cut out and replaced. Then new units are set plumb and level, shimmed, and fastened per the manufacturer’s instructions. On any opening where the window sits close to a shared property line, we coordinate gas line clearance and utility locating with PG&E before we dig or drill near grade, which is the standard practice in San Bruno after the 2010 pipeline event and can add a few days to the schedule.
Stage 5: Flashing, finish, and inspection (days 4 – 6, plus final)
Flashing, sealant, and exterior trim go on before the interior is closed up. We run a water test on any unit exposed to the prevailing wind off the Pacific, then hand off for finish work and the final inspection. You receive a walkthrough and written documentation of what was installed and how it was sealed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Custom & Geometric Windows: The Options You’ll Actually Choose Between
Three or four decisions drive most of the cost and most of the long-term performance.
- Frame material. Wood is the classic choice for architectural shapes and takes paint beautifully, but it needs refreshed sealing every 5 – 8 years in our climate. Aluminum clad over a wood core gives you the wood interior and a low-maintenance exterior, at a higher per-unit cost. Vinyl is the value option and handles basic arches well, though true geometric shapes usually exceed what standard vinyl profiles can form cleanly.
- Glass package. Double-pane Low-E is the baseline for San Bruno’s cool, damp climate and cuts condensation on the interior pane. Triple-pane adds cost and weight and only pays back on the coldest exposures. Tempered glass is required in some configurations, including full-height units and windows near doors.
- Operability. Fixed geometric units are the least expensive and the most weather-tight. Casement and awning operators add cost and hardware but give you ventilation. Grilles and muntins are visual only unless you choose true divided lites, which cost more.
- Finish and color. Manufactured exteriors hold color for decades. Painted wood needs periodic upkeep. On the interior, stained wood is the warmest option; painted wood or drywall returns are cheaper to finish.
Andersen and Marvin both offer custom geometric shapes with cladding, and Pella’s architectural line covers the larger radii. We’ll show you the trade-offs in person so you can pick the one that fits your house and your budget.
Custom & Geometric Windows Cost in San Bruno, CA
Here’s what a written estimate on custom and geometric windows in San Bruno looks like:
| Line item | Typical range |
|---|---|
| Single custom unit (arch, fixed, standard size) | $1,100 – $2,000 |
| Larger or complex unit (trapezoid, large radius, divided lites) | $2,000 – $3,200 |
| Operable custom unit (casement, awning) | Adds $200 – $500 per unit |
| Rot removal and framing repair | $300 – $1,500 per opening |
| Window replacement project (multi-unit, whole home) | $4,500 – $15,000 |
| Architectural geometric project (5+ units) | $8,000 – $25,000 |
What pushes a project to the low end: small fixed units, standard shapes, sound existing framing, and no structural modification. What pushes it high: structural changes to the opening, complex radii or trapezoids, premium glass packages, extensive rot, and permits that require engineering. Our estimates are written line-item, and the number you see on the signed bid is the number you pay. We never quote a range and then issue a change order for the same scope.
Make a point of asking any contractor whether the quote includes permits, disposal, and finish; those omissions are where budgets move after you’ve already signed. We pull the permits and pass the inspections for your project.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Do to Custom & Geometric Windows
San Bruno’s housing stock is unusual, and it changes this job in specific ways. The Crestmoor neighborhood was ground zero for the 2010 PG&E pipeline event, and the rebuilding wave that followed means you’ll find everything from fully retrofitted, code-current homes to older post-WWII structures that still need foundation bolting, shear walling, and chimney bracing. That matters when your custom window requires cutting a new opening, because we have to verify the wall’s structural condition before we cut into it. Working near the blast zone, PG&E gas line clearance procedures can also delay any earthwork, which we account for in the schedule.
Fog is the other local signal. San Bruno sits in the peninsula fog belt, and the steady onshore wind drives moisture into exterior sheathing, trim, and decks. When we open a wall for a geometric unit, we expect to find moisture damage around the original framing more often than not, especially on 1940s-era homes. That’s why we water-test and inspect every install before closing up. Homeowners here often pair a window upgrade with exterior work like Concrete Driveways & Concrete Work in San Bruno or Asphalt Driveways & Resurfacing in San Bruno while the scaffolding is up and the site is already mobilized.
If you’re considering a broader project, we cover the whole scope on our Windows & Doors in San Bruno page, and you can see the full service hub at Windows & Doors. To confirm we serve your block, see San Bruno.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in San Bruno
Plan on 6 to 10 weeks from signed contract to final inspection. Most of that is fabrication lead time (3 – 6 weeks); removal and installation itself is 2 – 4 days for a typical project. Permits and any post-2010 seismic verification on Crestmoor-area homes can add a week or two. Call (866) 320-2646 for a project calendar once we’ve measured.
Yes, in most cases. Like-kind replacement in the same opening often falls under a simpler permit process, but any new opening, structural change, or egress alteration requires a full permit and inspection. We pull the permit and pass the inspection for your job. Call (866) 320-2646 with your address and we’ll confirm what applies to your house.
Usually, yes. If the new unit fits the existing rough opening, we install it in place without touching the utilities in the wall. If you’re changing the size or shape substantially, we may need to reroute a wire or a vent line, and that gets flagged in the estimate before you sign. Call (866) 320-2646 for a scope check.
Single custom units run $1,100 to $3,200 each, and multi-window architectural projects run $8,000 to $25,000. The variables are shape complexity, size, glass package, operability, and any rot or structural repair we find once the wall is open. Call (866) 320-2646 for a free written line-item estimate.
All our work is covered by the 730-Day Done Right Promise, plus the manufacturer’s warranty on the window itself. If a unit fails, leaks, or isn’t installed correctly, we come back and make it right. Call (866) 320-2646 and a live person will schedule a free on-site estimate.
Get a Free Estimate on Custom & Geometric Windows in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for custom & geometric windows in San Bruno. We’ll measure the openings, inspect the walls for rot and moisture, and return a written line-item quote with the permits, disposal, and finish line all accounted for. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. From foundation to finish line, we handle the whole job.
Written by the team at Groundwork Construction Co. of San Francisco.