Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in San Bruno, CA: What It Takes and What It Costs
Asphalt driveways & resurfacing in San Bruno typically runs $3,500 – $9,000 for new asphalt paving, or $250 – $700 for sealing an existing surface, and most residential jobs take two to four days from tear-out to a drivable surface. Resurfacing (an overlay) is the cheaper path when the base is still sound; full replacement makes more sense when the subgrade has failed. Call (866) 320-2646 for a free on-site estimate.
How We Rebuild a San Bruno Driveway, Stage by Stage
An asphalt job is mostly prep and very little paving. The blacktop itself is a few hours; the base under it is what decides whether the driveway lasts ten years or thirty. Here’s the real sequence we run, and where you make decisions.
Day 1 – Demo and evaluation. We remove the old asphalt and haul it off, then expose the base course and subgrade. This is the honest moment: if the aggregate base is thin, soft, or full of clay, we show you before anything goes back down. You decide here between a simple overlay and a full rebuild, and the choice locks in the price.
Day 1 – 2 – Grading and drainage. We regrade for the slope away from the house and garage, set the crown so water sheds to the edges, and address any low spots. Good drainage matters more in San Bruno than in most of the Bay Area because the fog belt keeps surfaces damp far longer. You approve the final elevations and confirm where water will run off.
Day 2 – Base compaction. We lay and compact the aggregate base in lifts, usually 4 to 6 inches compacted, more if the soil is weak or the driveway takes heavy vehicles. This stage is where a driveway earns its lifespan; we don’t skip compaction passes to save an afternoon.
Day 2 – 3 – Paving. Hot-mix asphalt goes down at 2 to 3 inches compacted for a residential driveway, rolled while it’s still hot. We handle the joints and edges carefully because that’s where water gets in first. You make no decisions during paving; this is skilled labor, not a design choice.
Day 3 – 4 – Cure and handoff. The driveway needs to sit. No driving for 24 to 48 hours, no heavy loads for a couple of weeks, and sealer waits at least six months so the asphalt oils can cure out. We walk the finished surface with you, mark anything that needs attention, and explain the cure schedule in plain terms.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
The material choices on an asphalt job are narrower than people expect, but they still change the number and the lifespan. Here’s the honest trade-off on each:
- Full-depth replacement vs. overlay (resurfacing). An overlay is cheaper and faster, but it only works if the base is sound. Overlay a failed base and the cracks telegraph straight through within a couple of seasons. Rebuild costs more up front and is the only real fix for a driveway that’s heaved or settled.
- Asphalt thickness. 2 inches compacted is the residential minimum; 3 inches holds up better under trucks or a heavily loaded SUV and costs proportionally more. Most San Bruno homes with standard traffic do fine at 2 to 2.5 inches.
- Base depth and aggregate grade. Thin base is the number one reason driveways fail early. Four inches is standard; six inches of a well-graded crushed aggregate is worth the extra money where soil drains poorly or the driveway takes a heavy load.
- Sealer and timing. A quality asphalt sealer protects the surface and slows oxidation. Seal too early and you trap the oils; seal too late and the asphalt is already dried out. We’ll tell you the right window for your surface.
- Edging and aprons. Concrete or paver edging holds the asphalt edge and keeps it from crumbling at the perimeter. It’s a small line item that meaningfully extends the life of the driveway.
What Asphalt Driveways & Resurfacing Costs in San Bruno, CA
For San Bruno, expect $3,500 – $9,000 for a new asphalt driveway and $5,000 – $14,000 if the job requires full driveway replacement (demo plus rebuild). Driveway sealing runs $250 – $700 as a standalone maintenance job. These ranges are the real numbers, not teasers.
Five things push a job toward the low or high end:
- Square footage. A single-car driveway sits at the bottom of the range; a long double-wide runs toward the top or past it.
- Existing base condition. Sound base means a cheaper overlay; failed base means tear-out, regrading, and new aggregate, which is the single biggest variable.
- Drainage and grading work. A driveway with a proper slope to daylight costs less to engineer than one that needs a French drain or regrading to keep water from the garage.
- Access and haul-off. Tight driveways on a hill, or sites where the truck can’t get close, add labor and disposal cost. San Bruno’s slopes and setback cars make this a real factor.
- Permit scope. Driveway work touching the public right-of-way or a curb cut pulls in city review and adds cost and time.
Our written estimate is line-item: square footage, base depth, thickness, edging, haul-off, and permit fees if any. What’s typically not included is an unforeseen subgrade failure once we open it up, which is why we do a site evaluation before we put a number on paper. Upfront pricing, no surprises; the number you see is the number you pay unless you approve a change.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s construction market is shaped by the 2010 PG&E gas pipeline explosion in Crestmoor, which triggered a mandatory seismic retrofit and rebuilding wave that still governs permits, inspections, and how contractors work here today. A driveway job near the Crestmoor area can run into PG&E gas line clearance procedures before any digging starts, and that clearance can add days to a schedule. We plan for it rather than discover it on day one.
Housing stock matters too. Crestmoor and the surrounding neighborhoods are dominated by post-WWII single-family homes, many from the 1940s and 50s, with a share rebuilt or heavily retrofitted after 2010. That mix means we often work next to newer seismic-compliant structures and older homes at the same time, and lot grading, drainage, and utility runs differ block to block. The fog belt and steady onshore winds keep surfaces damp, which accelerates oxidation and makes proper drainage and a timely seal more important than in sunnier parts of the Peninsula. Driveways that hold water here crack within a few winters.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in San Bruno
A standard residential asphalt driveway in San Bruno takes two to four days from demo to a drivable surface, plus 24 to 48 hours of curing before you park on it. Add time if PG&E clearance is required near Crestmoor or if the site needs drainage work. Call (866) 320-2646 and we’ll give you a schedule for your specific driveway.
Often yes, if the work touches the public right-of-way, a curb cut, or drainage that connects to the street. Driveway work set entirely on private property may not need a permit, but grading and drainage changes frequently do. We confirm the requirement during the estimate and pull what’s needed; the permit scope is listed in the written quote.
Yes, if the base is sound and the cracking is surface-level. An overlay saves money and time, but a failed base will telegraph through within a season or two, so we evaluate before recommending it. We’ll show you what’s underneath before you decide. Call (866) 320-2646 for an honest look.
Resurfacing runs $3,500 – $9,000 for a standard driveway, and a full replacement with demo and rebuild runs $5,000 – $14,000. Sealing alone is $250 – $700. The gap comes down to base condition, driveway size, and drainage work. Call (866) 320-2646 for a line-item quote; estimates are free.
Every driveway we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. The written estimate spells out the coverage so there’s no fine print to untangle later.
Get a Free Asphalt Driveway Estimate in San Bruno
If your San Bruno driveway is cracked, heaving, or worn down to bare aggregate, the fix starts with a real look at the base, not a phone quote. Call (866) 320-2646 and we’ll schedule a free on-site estimate, walk the driveway with you, and leave you with a written, line-item price and a realistic timeline. A live person answers around the clock. If the driveway is part of a broader exterior plan, homeowners often pair this with Junior ADU & Interior Conversion in San Bruno, and for the wider scope see our Driveway & Pavers service or the Driveway & Pavers in San Bruno page, covering San Bruno and the surrounding area. Planning a backyard unit? Many also add a New Detached ADU in San Bruno down the line.
Written by the team at Groundwork Construction Co.