Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Mill Valley, CA: What It Takes and What It Costs
Walk-In Showers & Shower Remodeling in Mill Valley typically runs $9,000 – $28,000 for a full bathroom scope built around the new shower, with the shower component itself landing in the $4,500 – $12,000 range. A standard walk-in shower replacement takes 2 to 4 weeks of active work once permits clear; a shower that’s part of a wider refit runs 5 to 8 weeks. Call (866) 320-2646 for a free on-site estimate, and we’ll give you a written line-item price before anything gets demoed.
How the job actually runs, start to finish
Most contractors describe a shower remodel as “demo, build, tile.” That hides the decisions and the waiting. Here’s the real sequence we follow on Mill Valley jobs.
Stage 1: Site check and permit (week 1)
We measure the existing shower footprint, confirm wall substrate type, check whether the drain can stay put, and photograph the plumbing rough-in. You decide whether the layout changes or stays. If we’re moving the drain or adding a bench, that changes the permit scope, and in Mill Valley the city’s design-review process can add weeks before a single tile comes off the wall. Budget 2 to 6 weeks for permit issuance depending on scope.
Stage 2: Demo and framing (days 1 – 3)
We pull the old pan, curb, tile, backer and glass. On older Mill Valley homes we often find rotted framing behind the shower wall from a decades-old leak, and that’s when the job grows. We re-frame, replace any soft studs, and inspect the subfloor before we go further. You see what we see; no surprises buried behind drywall.
Stage 3: Rough-in and inspection (days 3 – 6)
New drain, valve, and any relocated supply lines go in. If we’re moving the shower head, adding a hand shower, or running a linear drain, this is the stage. The city inspects the rough plumbing before it’s closed up. Mill Valley inspectors are thorough, and that’s a good thing.
Stage 4: Waterproofing and tile (days 6 – 14)
This is where a shower lives or dies. We install a bonded waterproofing membrane over the substrate and a sloped pan built to drain, then set tile and grout. You pick tile now if you haven’t already. Curing and sealing add 1 to 2 days. We don’t rush this stage; a shower that fails at the membrane fails at year three, not year one.
Stage 5: Glass, fixtures, and final walkthrough (days 14 – 21)
Glass goes in last because it’s the most fragile delivery. We set the door, handle, and any fixed panel, install the shower head and controls, and walk the finished shower with you, checking slope, drainage, and grout lines. You sign off against the written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Walk-in shower choices trade cost against durability and maintenance, and the right answer depends on how you live in the bathroom. Here’s what actually matters.
- Tiled pan vs. prefab pan: A tiled pan lets you match the shower to the rest of the floor and looks custom, but it costs more and depends entirely on correct waterproofing. A prefab pan in a solid surface or acrylic is faster and more forgiving, but its size options are fixed. Budget $1,500 – $3,000 more for a tiled pan done right.
- Curbless vs. low-curb entry: A curbless shower is the accessible choice and looks clean, but it requires the floor to be built down or the drain to be recessed, which can mean structural work. A low curb (2 to 4 inches) costs less and drains more predictably. Expect to spend $800 – $2,000 more for curbless.
- Tile grade and format: Large-format porcelain (24×48 inches and up) means fewer grout lines and easier cleaning, but it needs a flawless substrate. Natural stone is beautiful and needs sealing. Mosaic tile on the floor improves grip and is the honest choice for safety in a wet shower.
- Glass enclosure: Frameless glass shows the tile and opens the room visually, but it’s the priciest option and demands precise measurement. Semi-frameless and framed glass cost less. Glass adds $1,200 – $3,500.
- Fixtures: A thermostatic valve, a rain head, and a hand shower run higher than a single two-handle setup. Brands like Sterling and Grohe hold up well, and we install both where the budget allows. Cheap trim on a good valve is fine; a cheap valve behind a good trim is not.
- Ventilation and heat: A correctly sized exhaust fan is not optional in a steamy shower, and a heated floor adds comfort. Both are upgrades worth pricing now because retrofitting them later costs more.
What Walk-In Showers & Shower Remodeling costs in Mill Valley, CA
A shower replacement on its own runs $3,000 – $8,500. A walk-in shower installation runs $4,500 – $12,000. When the shower is part of a broader bathroom refit, the full job runs $9,000 – $28,000. The number you land on depends on a handful of variables, not the tile you fall in love with.
- Shower size and configuration: A standard 36×48 shower is the baseline. A 4×6 or larger walk-in with a bench and double shower heads pushes toward the top of the range.
- Existing condition: Rotted framing, old galvanized supply lines, or a floor that’s out of level add real labor. This is the single most common reason a Mill Valley shower job goes over the low-end estimate.
- Moving plumbing or structure: Relocating the drain, adding a curbless entry, or moving a wall to expand the shower adds $1,500 – $4,000 and can trigger a longer permit review.
- Material grade: Porcelain and a prefab pan sit at the low end. Natural stone, frameless glass, and a tiled pan push toward the high end.
- Permit and inspection scope: A like-for-like replacement is a simpler permit than a layout change. Mill Valley’s process is more involved than most of the county, so permit scope affects both timeline and budget.
Our written estimate includes demo, framing repair, plumbing rough-in, waterproofing, tile, glass installation, and final walkthrough. It typically excludes tile and fixtures you select above the allowance and any structural repair we can’t see until the wall opens. We price the allowance clearly so you know the difference before you sign.
See the difference
Before
After
Before
After
Before
AfterWhat Mill Valley homes specifically do to this job
Mill Valley is a different kind of construction environment than most of the Bay Area, and it shows up in the shower. The hillside lots off Edgewood and Summit are steep, tree-lined, and tight, which means material delivery on a shower remodel often means a spotter and a pre-dawn drop on a single-lane road with nowhere to turn a truck around. That’s a scheduling reality, not an excuse, and we plan for it before demo day. Many of the homes we work on here are 1950s – 70s ranch and split-level, or early-1900s redwood and shingle cottages near downtown, and a fair number have unpermitted past additions that change what the shower walls actually contain once we open them. Older plumbing and foundation issues are the norm. And the city’s design-review process is discretionary and site-specific, so a shower that moves the drain or adds a bench may need more review than you’d expect. We cover Mill Valley from the flatlands to the hillside lanes and plan the permit timeline honestly from the first visit. If a wider refit is on your list, the shower work folds neatly into Bathroom Remodeling in Mill Valley, and homeowners often pair this bathroom remodeling service with exterior work like Roof Replacement & Installation in Mill Valley or Metal Roofing in Mill Valley when they’re already pulling permits.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Walk-In Showers & Shower Remodeling in Mill Valley
A like-for-like shower replacement takes 2 to 4 weeks of active work, and a walk-in shower as part of a full bathroom refit runs 5 to 8 weeks. Add 2 to 6 weeks for permit review, which in Mill Valley depends on whether you’re moving plumbing or changing the layout. Call (866) 320-2646 and we’ll give you a realistic timeline for your specific shower.
Yes, a permit is generally required when the shower involves new plumbing, a changed drain location, or electrical work for lighting or a fan. A tile-and-fixture replacement over the same pan may not need one, but we check before we start rather than after. We pull the permits and manage the inspections, and we’ll tell you honestly what your specific project needs.
Often, yes. A same-footprint walk-in shower with a new pan, waterproofing, tile, and glass can usually be done without touching the rough plumbing, which keeps the job simpler and less expensive. Curbless entries and larger showers often require some drain relocation, adding cost and permit scope. We’ll tell you at the estimate which category your shower falls into.
Not without your written approval. Our upfront pricing means the number on the estimate is the number you pay for the scope we agreed to. If we open a wall and find rot that’s a genuine hidden condition, we document it, price it clearly, and get your approval before proceeding. The 730-Day Done Right Promise covers the workmanship on whatever we install, and it stays in force for two full years after we hand you the finished shower. Call (866) 320-2646 for an exact quote; estimates are free.
Every shower we build is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two years after completion. That covers the workmanship on the waterproofing, tile, plumbing rough-in, and glass installation. Manufacturer coverage on fixtures and glass comes separately, and we’ll walk you through it at the final inspection.
Get a free estimate for your Mill Valley shower
Call (866) 320-2646 and a live person answers, any hour. We’ll schedule a free on-site estimate, measure your shower, look at the existing plumbing and substrate, and hand you a written line-item quote with a clear scope and a real timeline. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Our technicians have up to 12 years of experience building showers that hold up.
Written by the team at Groundwork Construction Co.