Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Mill Valley, CA: What It Takes, What It Costs
A tub-to-shower conversion in Mill Valley typically runs $3,500 – $10,000 and takes 5 to 10 working days from demo to final inspection, depending on whether the drain and valve stay where they are. The job removes an existing tub, rebuilds the wet area with a waterproofed shower base and new wall finish, reconnects the drain and supply, and finishes with tile and glass. Most Mill Valley conversions land in the $6,000 – $8,500 range. Call (866) 320-2646 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
We don’t hand you a start date and disappear. Here’s the real sequence, with what you decide and when.
Stage 1: Site visit and written scope (day 0, about 90 minutes)
We measure the alcove, check the drain location and valve height, look at what’s behind the existing surround, and confirm whether the framing is sound or has old water damage. You get a line-item written estimate, not a lump number. This is where you decide the shower footprint and whether you’re keeping the tub’s rough-in in place. Upfront pricing means the number on the estimate is the number you pay.
Stage 2: Demo and rough-in inspection (day 1, one full day)
The tub, surround, and any greenboard come out. If the tub’s drain sits off-center from where a shower pan needs it, the drain gets relocated and the subfloor patched. We photograph the open wall before anything closes up so you have a record. A permit inspection of the rough plumbing, if required, happens at this point.
Stage 3: Waterproofing and backer (days 2 – 3, two days)
This is the stage that decides whether your shower lasts twenty years or leaks in three. Cement backer board goes up, seams get taped and mortared, and a bonded waterproofing membrane is rolled or sheeted over the entire wet area, including the pan-to-wall transition. We flood-test the pan for 24 hours before tile goes anywhere near it.
Stage 4: Tile, trim, and fixtures (days 4 – 7, three to four days)
Wall tile, a niche if you want one, the shower valve trim, and the drain grate. Grout and caulk at the changes of plane. If you’ve chosen a Sterling or Grohe valve and trim package, this is the day it goes in. You’ll want to have your fixtures picked by now, because a backordered trim set stalls the finish.
Stage 5: Glass, final inspection, walkthrough (days 8 – 10)
Glass gets templated after tile is set, so expect a few days between tile and glass install. Final plumbing inspection, then a walkthrough where we show you the waterproofing photos, the inspection card, and the care instructions. Then it’s yours. The work carries our 730-Day Done Right Promise, so if a seam or a drain shows a problem inside two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on This Job
A tub-to-shower conversion is a small footprint with a lot of decisions packed into it. Here’s what really matters, with the honest trade-off on each.
- Shower base type. A prefabricated acrylic or fiberglass pan is the fastest and cheapest option (often $400 – $900 installed) and won’t leak if set right. A tiled mud-set pan costs more ($1,200 – $2,500) but lets you match the floor to the walls and pick any drain location. Tiled pans need a skilled hand; a bad one is the number-one cause of shower leaks.
- Wall finish. Large-format porcelain (12×24 or bigger) reads clean, hides grout lines, and costs about the same per square foot as a 4-inch tile but installs faster. Ceramic is budget-friendly and fine for the walls. Natural stone looks remarkable and needs sealing every year or two in Marin’s climate.
- Valve and trim. A basic pressure-balance valve does the job. A thermostatic valve (Grohe makes a solid one) lets you set the temperature and holds it even when someone flushes a toilet on the same line, running $400 – $900 more for parts and labor.
- Glass. A framed sliding door is the value pick. A frameless fixed panel with a hinged door costs $1,200 – $2,800 more but opens up the room and suits a small Mill Valley bath where every inch shows.
- Niche and bench. A recessed niche is a $150 – $400 add. A built-in bench runs $600 – $1,500 and only makes sense if the alcove is big enough to keep a walkable floor. In a standard 5-foot alcove, a bench usually eats too much space.
What Tub-to-Shower Conversion Costs in Mill Valley, CA
For a standard alcove conversion in Mill Valley, budget $3,500 – $10,000, with most jobs landing between $6,000 and $8,500. A larger footprint with tile pan, frameless glass, and thermostatic trim pushes toward the top. A straight swap with a preformed pan and basic trim sits near the bottom. Here’s what moves the number:
| Scope item | Typical range |
|---|---|
| Base conversion (demo, waterproof, preformed pan, tile walls) | $3,500 – $6,000 |
| Tiled mud-set pan instead of preformed | +$800 – $1,600 |
| Frameless glass enclosure | +$1,200 – $2,800 |
| Drain or valve relocation | +$600 – $1,800 |
| Hidden water damage or rot repair | +$500 – $2,500 |
| Permit and inspection | Varies by scope |
Size is the first variable: a 30-inch alcove costs less than a 60-inch one because there’s less tile, less backer, and less labor. Existing condition is the second, and the one people underestimate. A tub that’s been leaking slowly for years may have soft subfloor or a rotted stud, and we can’t know until demo. Relocating the drain or valve adds plumbing work. Material grade moves the number more than most people expect once you get past the base tile. And permit scope depends on what’s being moved: a straight fixture swap may not need one, but relocating a drain usually does.
Your written estimate covers demo, disposal, backer, waterproofing, tile and setting materials, the pan, standard fixtures, and the final inspection. What it doesn’t cover unless we scope it in: glass (usually a separate line), high-end fixture upgrades, hidden damage, and any structural repair. We tell you that up front so nothing surprises you mid-job. No-hassle upfront pricing, and 0% financing for 18 months if you want to spread the cost. We also take $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Mill Valley Homes Specifically Do to This Job
Mill Valley isn’t a flat-grid town, and that changes both the permit timeline and the day-to-day reality of the work. Hillside lots and tight tree-lined lanes near downtown mean material delivery has to be scheduled, sometimes pre-dawn, with a spotter for single-lane stretches. A tub-to-shower conversion is small enough to avoid the worst of the staging headaches, but narrow access still matters for a long tile order or a glass delivery.
The bigger local factor is the housing stock. That early-1900s redwood cottage near downtown often has a tub alcove that was retrofitted at some point with questionable framing, or greenboard directly on studs with no vapor management. We see it constantly. The 1950s – 70s ranch and split-level homes on the hillsides more often have an original cast-iron tub set into a mortar bed, which means heavier demo and sometimes a subfloor that needs work. Along the lanes above downtown, unpermitted past additions are common enough that we check the wall cavity before assuming anything about what’s behind it.
Mill Valley’s discretionary design review and permit process rewards a clear scope. A tub-to-shower conversion that stays within the existing footprint and doesn’t relocate plumbing is generally the easiest path; moving the drain or adding a wall usually triggers more review. We pull the permits and schedule the inspections, and we build the scope so it passes the first time. Wildfire-resistant detailing isn’t a factor inside a shower, but the local emphasis on fire-rated assemblies and drainage detail says something about how carefully Mill Valley builds are reviewed, and we work to that standard. If your exterior is on the list too, homeowners often pair a bath project with Metal Roofing in Mill Valley or Tile Roofing in Mill Valley while the crew and the staging are already arranged.
We work all over Mill Valley, from the flats to the hillside lanes, and we’ve seen how a slow tub leak plays out differently in a redwood cottage than in a 1970s split-level.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Mill Valley
Most conversions take 5 to 10 working days, and the biggest variable is glass: templating happens after tile, so a custom enclosure adds several days. If the drain and valve stay put, it’s closer to 5. If plumbing moves or we find rot, add 2 to 3 days. Call (866) 320-2646 and we’ll give you a timeline from a site visit, not a guess.
Often yes, especially if the drain or supply lines move. A straight fixture swap with no plumbing relocation may qualify as cosmetic, but the safe answer is to pull the permit and let the inspection confirm it. We handle the permit and inspections as part of the scope, so you’re not chasing the building department. Call (866) 320-2646 to talk through your specific alcove.
Usually yes. The drain location is the deciding factor: if the existing tub drain lines up with where a shower pan needs it, no plumbing relocation is needed and the job stays near the low end of $3,500 – $10,000. If it doesn’t line up, moving it adds $600 – $1,800. We check this at the first visit so you know before you commit.
The range is $3,500 – $10,000, with most jobs at $6,000 – $8,500. The low end is a straight swap with a preformed pan and basic trim; the high end is a tiled pan, frameless glass, and a thermostatic valve. We give you a written line-item estimate so you can see exactly what’s driving the number. Call (866) 320-2646 for your free estimate.
Every conversion we do is covered by our 730-Day Done Right Promise: if the workmanship fails inside two years, including a waterproofing or drain issue, we come back and make it right. Materials carry their manufacturers’ warranties on top of that. It’s one of the longer workmanship guarantees in residential construction, and it’s in writing.
If you’re planning to widen the scope into a full bath refresh, that’s a different conversation, and you can see how it works on our Bathroom Remodeling in Mill Valley page. This page is about the conversion itself, and it’s part of our Bathroom Remodeling service.
Get a Free Tub-to-Shower Conversion Estimate in Mill Valley
Call (866) 320-2646 to schedule a free on-site estimate for your tub-to-shower conversion in Mill Valley. A live person answers around the clock, so you won’t hit voicemail at 7 p.m. or wait until Monday. We’ll measure the alcove, check the drain and framing, flag any hidden problems, and hand you a written line-item quote with no change-order games. Financing at 0% for 18 months is available, and $1,000 comes off projects over $10,000.
Written by the team at Groundwork Construction Co.