Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Mill Valley, CA: What It Takes and What It Costs
Concrete driveways and concrete work in Mill Valley typically run $4,500 to $12,000 for a full driveway installation, and a standard residential pour takes three to five working days from demo to drive-on, with the cure handled before we close out the job. On the steep lanes and hillside lots we work across 94941, expect the number to climb toward the top of that range. Call (866) 320-2646 for a written, line-item estimate before anything gets torn up.
How Our Concrete Process Runs, Stage by Stage
Concrete work rewards planning. Skip a step and you’ll be patching cracks in two winters. Here’s the actual sequence we hold our crews to in Mill Valley.
Stage 1: Site walk and access survey (day 1)
We measure the run, look at the existing slab or gravel, and check where water goes when it rains. On hillside lots this is where we plan staging – how a loaded truck gets in, where the chute reaches, and whether a pump truck is needed. You decide the layout and finish here, not later.
Stage 2: Tear-out and prep (days 1 – 2)
Demo is the loud part. Old concrete or asphalt comes out, along with roots and soft soil. We excavate to grade and confirm the base depth – six inches of compacted aggregate for a driveway that sees daily weight, more where the subgrade is poor. This is also when we form the edges and set the slope so water runs away from the garage and house. You approve the grade before forms are set.
Stage 3: Rebar, vapor barrier, and inspection (day 2 – 3)
Rebar goes in on chairs, tied and spaced for load. A vapor barrier and any drain ties go down. If the scope crosses into structural or retaining work, we schedule the city inspection at this point – once concrete is poured, that window is gone. Expect a half-day buffer for the inspector.
Stage 4: Pour and finish (day 3)
Standard pour is a single day. We control joints every eight to ten feet to steer where the cracks will land. Broom finish is standard for traction; saw-cut, salt-and-pepper, and exposed aggregate are options we’ll walk you through. Decide the finish before pour day, not on it.
Stage 5: Cure and striping (days 4 – 28)
You can walk on it in 24 to 48 hours. Light vehicle traffic waits until day seven. Full cure is 28 days – that’s when you park on it and when we’d recommend any stain or sealer. You make one call at the end: whether to seal now (we suggest waiting a season) or wait.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Concrete is not one product. These are the real forks in the road for a Mill Valley job.
- Standard broom-finished pour: the workhorse. Solid traction in Marin’s wet winters, the most economical route, and easy to match to a garage apron. Fits most residential driveways.
- Exposed aggregate: richer look and hides flaws well, but costs more and is harder to spot-repair if a section fails.
- Stamped or colored concrete: gives the look of pavers without joint movement over time, but the surface can get slippery in wet weather – a real concern on a hillside slope.
- Thickness and rebar grade: four inches works for a light-use path; a driveway taking two vehicles and a truck wants five to six inches with #4 rebar on a 12-to-16-inch grid. This is the cheapest upgrade you can make to lifespan.
- Base and drainage: the upgrade most contractors skip. Proper compacted base and a positive slope cost extra now and save the pour from frost-style heave and runoff damage.
If the wider project also calls for hardscape – a patio, a walkway, an entry landing – that’s part of a full Driveway & Pavers in Mill Valley scope, and we can quote it together so the grades and finishes line up.
What Concrete Driveways & Concrete Work Costs in Mill Valley, CA
A full driveway installation in Mill Valley lands between $4,500 and $12,000. A replacement – pulling out an existing slab and starting fresh – runs $5,000 to $14,000 once demo, haul-off, and base rebuild are counted. Here’s what actually moves the number:
- Size and slope. A flat 400-square-foot driveway sits at the low end; a long, steep run up a hillside lane pushes toward the top.
- Base condition. Solid subgrade keeps the price down. Soft soil, roots, or a hillside that needs retaining work adds cost.
- Access. On single-lane Mill Valley streets with no turnaround, pump trucks and hand-carried concrete add labor hours.
- Finish and thickness. Standard broom at four inches is the baseline; stamped finishes and six-inch pours with heavier rebar move up.
- Permit scope. A straight driveway swap is usually straightforward; anything touching grade, drainage, or retaining walls pulls in more review.
Your written estimate covers demo, haul-off, base prep, rebar, pour, finish, and cleanup. It typically does not cover unforeseen underground utilities, major retaining wall changes, or a sealer application, and we flag those separately so there’s no surprise on the final invoice. Upfront pricing, no surprises – the number on the quote is the number you pay, and every job is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Mill Valley Homes Specifically Do to This Job
Mill Valley is not off-the-shelf construction. The city runs a discretionary design-review process, and on a hillside lot the driveway is often where that review gets interesting – grade changes, runoff, and how the pour ties into a cantilevered redwood deck all come up. Staging is its own puzzle: a lot of streets off the hillsides are single-lane with no turnaround, so we plan spots and delivery windows in advance, sometimes pre-dawn. Fire-risk rules can push non-combustible detailing even on exterior concrete edges and retaining elements. The homes we most often work on are the 1950s – 70s ranch and split-level places on the slopes – many with older foundations and past unpermitted additions that show up the moment we start digging. Wet Marin winters make drainage and positive slope the difference between a driveway that lasts and one that ponds. If a homeowner is converting a garage or adding a unit, they’ll often pair this with a Garage Conversion ADU in Mill Valley or a New Detached ADU in Mill Valley, since the driveway and approach usually need rework to serve the new use.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Mill Valley
Most residential pours take three to five working days from demo to walkable, with vehicle traffic allowed around day seven and full cure at 28 days. Steep or access-constrained lots can add a day or two on the front end. Call (866) 320-2646 to get a timeline pinned to your address.
A like-for-like driveway replacement usually doesn’t require a building permit, but anything touching grade, drainage, retaining walls, or the design-review process does. We pull what’s required and schedule the inspections, so you’re not the one chasing the city. Call (866) 320-2646 to confirm what your project needs.
Sometimes – a thin overlay works on a sound, stable slab, but it’s a short-term fix, not a long one. On most Mill Valley lots, with our wet winters and hillside movement, a full tear-out and rebuild is the more honest recommendation. We’ll tell you which your slab actually qualifies for. Call (866) 320-2646 for a free on-site look.
Installations run $4,500 to $12,000, and replacements run $5,000 to $14,000. The exact number depends on size, slope, base condition, access, and finish. Call (866) 320-2646 for a line-item quote – estimates are free.
Every project is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, not cracking from a root or a vehicle load the slab wasn’t designed for, so we plan the pour to handle Mill Valley’s actual conditions up front.
Get a Free Estimate on Your Concrete Project
We’ll come out, walk the site, and put a written line-item number in your hands before any concrete is broken. No vague ranges, no change orders once the truck rolls. Call (866) 320-2646 – a live person answers around the clock – and we’ll set your free estimate for concrete driveways and concrete work in Mill Valley. We serve homeowners across Mill Valley and the surrounding hills. Browse our broader Driveway & Pavers service for the full scope.
Written by the team at Groundwork Construction Co.