A Groundwork company - serving San Francisco, CA
Asphalt Driveways & Resurfacing in Mill Valley, CA | Groundwork Construction Co. of San Francisco

Asphalt Driveways & Resurfacing in Mill Valley - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Asphalt Driveways & Resurfacing in Mill Valley, CA: What It Costs and How Long It Takes

Asphalt driveways and resurfacing in Mill Valley typically run $3,500 – $9,000 for a new asphalt drive and $250 – $700 for a seal coat, with most residential jobs finished in three to five working days once the weather cooperates. A full replacement on a steep hillside lot lands closer to $5,000 – $14,000. Call (866) 320-2646 for a free on-site estimate with a written, line-item price. Spring and fall are the busiest months here, so book before the winter rains set in.

Call (866) 320-2646

From First Cut to Final Roll: How We Build an Asphalt Drive in Mill Valley

Every driveway here starts with the same reality: the grade under the asphalt decides whether it lasts five years or twenty. Here’s the sequence we run, and what you’ll be deciding along the way.

  • Day 1 – site walk and drainage plan. We measure the slope, check where hillside runoff will shed water, and locate the utility boxes and cleanouts you don’t want buried. You’ll decide the driveway width (a single 10-foot lane versus a 14-foot lane with a turnaround pad) and the finish grade relative to your garage floor. This visit takes two to three hours and the decisions you make here dictate everything downstream.
  • Day 1-2 – demolition and haul-off. The old surface comes out, whether it’s failed asphalt, cracked concrete, or a gravel base that’s been losing material for years. On a Mill Valley hillside lane, the dump truck and excavator have to stage carefully, so plan on a spotter and possibly an early-morning delivery window. Demolition typically eats one full day.
  • Days 2-3 – base prep and compaction. This is the stage that gets skipped by cheap crews and it’s the stage that matters most. We cut the subgrade, bring in class-2 aggregate base, and compact it in lifts to the right density. You’ll decide whether to add geotextile fabric under the base (worth it on shifting hillside soil) and whether a French drain or channel drain belongs at the low side of the apron. Add half a day if we’re trenching for drainage.
  • Day 3-4 – paving. Asphalt comes in hot, usually 2 to 3 inches compacted for a residential drive. On a sloped Mill Valley lot we may lay two lifts to control the grade. You’ll pick the mix – standard versus a polymer-modified mix that resists rutting on a hot south-facing grade – and confirm the edge treatment, whether you want a flush cut to the landscape or a small curb lip.
  • Day 4-5 – finish and cure. Edges are compacted, the driveway is swept, and the surface is left to cure. Keep vehicles off it for 48 to 72 hours and give it a light seal coat after the first six months to a year, then every two to three years after that. You’ll decide at this stage whether to schedule the first seal coat now or wait until the asphalt has fully cured.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Choices That Actually Change Your Driveway

Most of the decisions on this job are not cosmetic. They’re about how the surface handles water, grade, and heat.

  • Standard versus polymer-modified asphalt hot mix. Standard mix is the budget option and fine for flat, shaded driveways. Polymer-modified costs roughly 15 – 25% more but resists rutting on steep, sun-baked grades common on Mill Valley hillside homes.
  • Base thickness and fabric. Four inches of aggregate base is common; six inches plus geotextile is worth it on soft or shifting soil. Fabric adds a few hundred dollars and can save you thousands in base repair down the road.
  • Drainage detail. A channel drain or French drain at the low point of the apron keeps water from sheeting under the asphalt and undermining the base. Skip it and you’ll be patching within a few seasons.
  • Finish grade and edge treatment. Flush cut to landscape, small curb lip, or a border of pavers or Belgard units along the edge to hold the asphalt in place on a slope. A paver border can be paired naturally with the wider scope of our Driveway & Pavers work.
  • Resurfacing versus full replacement. A mill-and-overlay resurface costs less but only works if the base is sound. If the base is failing, resurfacing just buys you a couple of seasons before the cracks return.

What Asphalt Driveways & Resurfacing Cost in Mill Valley, CA

Plan on $3,500 – $9,000 for a full asphalt driveway installation, $5,000 – $14,000 for a driveway replacement, and $250 – $700 for a seal coat. Resurfacing an existing drive sits in the lower middle of that range. Here’s what moves the number:

Line item Typical range
Asphalt driveway paving (new) $3,500 – $9,000
Full driveway replacement $5,000 – $14,000
Seal coating $250 – $700

What pushes a job to the top of that range: driveway length and width (a long hillside run versus a short flat apron), whether the old base has to be excavated and hauled off, whether drainage has to be added, polymer-modified mix versus standard mix, and how difficult access is on a narrow tree-lined lane. A written estimate from us includes demolition, base prep, paving, compaction, and cleanup. Things that sometimes sit outside the base quote: drainage trenching, a paver border, and any retaining wall or grading work the slope demands.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Mill Valley Lots Are a Different Kind of Job

Most Mill Valley driveways aren’t flat rectangles off a suburban cul-de-sac. They’re cut into hillsides, hemmed in by redwoods and mature oaks, and accessed from single-lane lanes with no turnaround. That changes everything about how you build one. On the twisty lanes above downtown and up in Tamalpais-Homestead Valley, we often need a spotter and pre-dawn material deliveries just to get the truck in. The Mediterranean climate – wet winters, dry summers – means hillside runoff can rip the base out from under a poorly drained drive, and the city’s wildfire-resistant detailing expectations carry over to exterior surfaces and edge treatments even on small projects. If the driveway is part of a full Driveway & Pavers in Mill Valley plan, or paired with the site work for a New Detached ADU in Mill Valley, the access and drainage planning has to happen once, not twice. The 1950s – 70s split-levels on the hillsides are our most common customers, and their driveways usually fail in the same two ways: water undermining the low edge and root heave from tree removal. If resurfacing is paired with a Junior ADU & Interior Conversion in Mill Valley, we sequence the site work so deliveries don’t tear up the fresh asphalt.

Serving Mill Valley, CA – Our Local Coverage Area

We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Asphalt Driveways & Resurfacing in Mill Valley

Get a Free Estimate for Asphalt Driveways & Resurfacing in Mill Valley

We’ll come out to your property and walk the grade, check the base, and hand you a written, line-item estimate for asphalt driveways & resurfacing in Mill Valley – no ballpark numbers, no surprises. Our technicians have up to 12 years of experience on hillside asphalt work, and we’re licensed and insured. Calls are answered by a live person, 24/7, at (866) 320-2646. We also serve Mill Valley and the surrounding hills every week.

Written by the team at Groundwork Construction Co.

Why Mill Valley Chooses Groundwork Construction Co. of San Francisco

We set the standard for asphalt driveways & resurfacing in Mill Valley.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Mill Valley

Getting your asphalt driveways & resurfacing project started is simple.

1

Call or Request a Free Estimate

Tell us about your asphalt driveways & resurfacing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local asphalt driveways & resurfacing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Mill Valley Customers Say

Trusted by homeowners across Mill Valley and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Asphalt Driveways & Resurfacing in Mill Valley?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Mill Valley.

(866) 320-2646

Request a Free Estimate in Mill Valley

Tell us about your asphalt driveways & resurfacing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch