Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Corte Madera, CA: What the Job Really Takes
New cabinets and countertops in Corte Madera typically run $14,000 to $45,000 for a full kitchen’s worth, and the work itself takes two to four weeks from demolition to final caulk. The bulk of that time isn’t installation; it’s templating, fabrication, and the small structural decisions that surface once the old boxes come out. Call (866) 320-2646 and we’ll walk your kitchen and put real numbers on it.
How we run a cabinet and countertop job, start to finish
Every project follows the same five stages. Here’s what actually happens, and when you’ll need to make a decision.
Stage 1: Measure and layout (day 1, about 2 hours)
We measure the walls, check them for plumb and square, and note where the electrical, gas, and plumbing land relative to the new cabinet boxes. On older Corte Madera homes this is where surprises surface: walls that are an inch out of square over eight feet, or a gas line running exactly where a drawer stack wants to go. You decide the cabinet layout and door style at this stage, because everything downstream depends on it.
Stage 2: Demolition and prep (days 2 – 3)
Old cabinets, countertops, and backsplash come out. We patch and prime the wall behind them, cap or reroute utilities if the layout moves, and level the floor under the cabinet footprint. If the layout is staying put, this is a two-day stage. If we’re relocating a sink or a range, add a day for the plumber and electrician.
Stage 3: Cabinet installation (days 4 – 7)
Base cabinets go in first, shimmed and scribed to the wall, then uppers, then fillers and crown. You’ll confirm hardware placement before we drill, since pulls and knobs are unforgiving once the holes exist. A standard kitchen takes three to four working days; a large or angled layout can push to five.
Stage 4: Template and fabrication (days 8 – 18)
This is the wait most homeowners don’t expect. Stone countertops are templated only after the cabinets are set, because the template has to match the actual installed boxes, not the plan. Fabrication of quartz or granite then takes roughly seven to ten working days at the shop. You choose the slab and edge profile during stage 1 or 2 so this window doesn’t stretch. Laminate or butcher block can be cut and fitted in a day or two and skipped ahead.
Stage 5: Countertop install and finish (days 19 – 22)
The slab goes in, the sink and faucet get set, and we caulk the seams. You approve the final walkthrough, and the 730-Day Done Right Promise starts on the day we hand you the keys to your kitchen. If a door is misaligned or a seam isn’t tight, we come back and make it right; that’s what the promise is for.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes come in fixed sizes and cost the least, but they force filler strips into the layout. Semi-custom (KraftMaid is a workhorse here) lets you adjust widths in two-inch increments and pick the finish. Full custom runs two to three times the price and only makes sense when the room has odd angles or a period detail to match.
- Quartz vs. granite vs. butcher block. Quartz is the default for a reason: non-porous, no sealing, consistent pattern. Granite is natural stone with real variation and needs resealing every year or two. Butcher block is warm and repairable but wants oiling and doesn’t love a wet sink surround.
- Door material and finish. Painted MDF takes a clean finish and handles humidity better than most people expect. Solid wood (maple, oak) can be refinished down the road. Thermofoil is the budget option and the one most likely to peel near a dishwasher after several damp winters.
- Drawer and hinge hardware. Soft-close undermount slides and full-extension drawers add maybe $1,500 to a kitchen and are the difference between a cabinet that feels solid in year ten and one that rattles. Worth the money.
- Sink and faucet. An undermount sink changes the countertop fabrication (polished edge, cutout) and should be on site before templating. A Grohe or Sterling faucet is a reasonable mid-tier call; decide early so the plumber isn’t waiting.
What Cabinets & Countertops costs in Corte Madera, CA
Plan on $14,000 to $45,000 for cabinets and countertops together. Here’s how the numbers break down.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Small partial kitchen refresh | $9,000 – $20,000 |
Five things push a job from the low end to the high end. First, cabinet grade: stock vs. semi-custom vs. custom. Second, layout changes (moving a sink, range, or fridge) that require plumbing, gas, or electrical rough-in. Third, countertop material, where a large quartz island can add several thousand on its own. Fourth, condition of what’s behind the old cabinets, which on older Corte Madera homes can mean dry rot or out-of-square framing. Fifth, whether permits are triggered by the scope. Your written estimate lists labor, materials, and allowance items line by line, and the number you see is the number you pay unless you change the scope in writing. What’s typically not included: appliance purchase, painting beyond touch-up, and structural repair found mid-demo. We price those separately and never as a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera homes specifically do to this job
The housing stock here shapes the work. Many of the mid-century ranchers and split-levels from the 1950s through the 70s are now getting gut rehabs, and that means we’re often pulling cabinets off original framing that has shifted, settled, or taken on moisture over decades. On the low-lying flats near Corte Madera Creek and the Town Center, the flood-zone elevation rules affect how we handle base cabinets: we spec moisture-resistant boxes, elevate the toe kick, and plan drainage paths so a wet winter doesn’t find its way into the cabinet run. On the hillside lots above town you’ll see the opposite problem, which is settling and slope movement that throws a wall out of plumb and forces custom scribing or shimming on install. Both sides of town are in ZIP codes 94925 and 94976. Wet marine winters are hard on thermofoil and particleboard, so we steer toward materials that hold up. This job is also often part of a full Kitchen Remodeling in Corte Madera when the homeowner decides to take the whole room at once, and neighbors frequently pair it with Walk-In Showers & Shower Remodeling in Corte Madera or a Tub-to-Shower Conversion in Corte Madera in the bathroom down the hall.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Corte Madera
Two to four weeks for a typical kitchen, with the biggest chunk being the templating and fabrication wait on stone. If you choose laminate or butcher block, the job can finish in about ten days. Call (866) 320-2646 for a schedule built around your room.
If the cabinets and countertops are staying in the same location with no new plumbing, gas, or electrical, a permit usually isn’t required. Once you move a sink, reline a gas range, or cut into structure, town review applies, and on the creek-side flats there are elevation rules that can complicate a base cabinet run. We tell you up front whether your specific scope needs one.
Yes, and that’s the common case. Keeping the sink and range where they are cuts days off the schedule and thousands off the price. If you want a different layout, we plan the rough-in work and price it before anything is ordered.
Between $14,000 and $45,000 for a full kitchen’s worth, depending on cabinet grade, countertop material, and whether the layout moves. A cabinet-only or countertop-only job lands in the $2,000 to $13,000 range. Call (866) 320-2646 for an exact quote; estimates are free.
Every job is covered by the 730-Day Done Right Promise. If a door sags, a drawer sticks, or a seam opens up, we come back and make it right. Background-checked, uniformed technicians do the work, and our kitchen remodeling service stands behind every trade it brings into your home.
Get a free estimate for Cabinets & Countertops in Corte Madera
Call (866) 320-2646 and a live person answers, day or night. We’ll ask a few questions about your room, set a time to walk it, and hand you a written line-item estimate with material choices and a fixed price. If we’re the right fit, we pull the permits and get your Corte Madera kitchen on the schedule. We cover Corte Madera and the surrounding towns.
Written by the team at Groundwork Construction Co.