Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Corte Madera, CA: The Straight Answer
Door installation in Corte Madera runs $450 to $1,900 per door for a standard interior or exterior unit, and $1,200 to $3,800 for a custom wood or carriage-style door that has to match the finish and hardware of the rest of the house. A single door is typically a one-day job; whole-house packages where the openings don’t change framing take two to four days. Call (866) 320-2646 and we’ll set a free on-site estimate so you have a real number instead of a range.
How Our Door Installation Process Actually Runs
Every job is different, but the sequence is the same whether you’re replacing one worn entry or outfitting a new build. Here’s what each stage costs you in time and decisions.
Stage 1: On-site measure and opening assessment (Day 1, about an hour)
We laser-measure rough openings, check the plumb and square of the existing framing, and photograph the threshold and sill condition. On mid-century homes in Corte Madera, this is where we find out whether the original framing has been let in or modified over the decades. You’ll decide at this visit whether the goal is a straight replacement (same size, same swing) or a relocation or resize, which changes the budget and the scope.
Stage 2: Selection and ordering (Days 2 to 10, mostly lead time)
You pick the material, door slab, swing direction, hardware and finish. Standard sizes ship in roughly five to ten business days; a custom wood carriage-house door or a non-standard height can run four to six weeks or longer, especially with a factory finish. Nothing gets ordered until you’ve signed the written estimate, and we confirm exact lead times in writing so you’re not guessing.
Stage 3: Prep and rough-in (Day of install, morning)
The old door and trim come out, and we inspect the framing, sill and flashing. If the rough opening needs to be squared or resized, that’s a structural step and adds time. Exterior openings get new flashing and a sill pan before anything goes back in, because that’s the detail that keeps Corte Madera’s wet winters on the outside where they belong.
Stage 4: Set, shim, seal, and hardware (Day of install, afternoon)
We set the unit, shim it true, anchor it, insulate and weatherstrip, then hang hardware, locksets and hinges. Plumb, square, level and finish-face flushness all get checked before the trim goes on. On high-end wood doors, this is the part that takes the most precision: a two-millimeter gap error is visible at the head jamb.
Stage 5: Trim, finish, punch walk (same or next morning)
Interior trim and exterior thresholds go on, touch-up finish goes where it’s needed, and we walk every opening with you. You get a written punch list of anything that needs a return trip, and the work stays under our 730-Day Done Right Promise in writing. If a door drags, a lock won’t align or a seal lets water in, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between
Most of the material decision comes down to a handful of real trade-offs. Here’s the honest version of each.
- Fiberglass exterior doors: Holds up best to Corte Madera’s marine moisture and coastal sun because it won’t warp, crack or need refinishing. Typically $900 to $2,200 installed. Best general pick for front and back entries.
- Solid wood and wood carriage-house doors: This is where high-end Corte Madera homes live. Wood gives you the depth and detail fiberglass can’t match, but it needs correct sealing and periodic finish upkeep, and it costs $1,200 to $3,800 or more for a true custom unit.
- Steel exterior doors: Strongest for security and holds paint well as long as the finish is maintained. It dents under impact and shows dings on a front entry. Often $700 to $1,600 installed.
- Interior doors, MDF vs. solid core: Hollow MDF runs $250 to $650 per door installed; a solid-core or solid-wood door at $450 to $1,100 cuts sound transfer between rooms. The solid core is worth the extra in a home with open, high-ceiling rooms where noise carries.
- Hardware and finish grade: A basic builder lockset runs $80 to $200. Solid brass or high-end smart locks that integrate with home security systems jump to $300 to $900. On a custom home where the door detail is a design statement, this is where homeowners spend.
- Pre-hung vs. slab: A pre-hung unit (door and frame together) installs faster and more cleanly at $450 to $900 installed for interior. A slab-only door replaces just the panel and preserves original trim, but hangs precision work and is best suited to good existing frames.
Our brand partners include Andersen for exterior units and James Hardie-trussed openings in newer construction, and homeowners often pair the front-door work with a set of matching window trims so the whole facade reads as one design.
What Door Installation Costs in Corte Madera, CA
The honest range for a single installed door in Corte Madera is roughly $450 to $3,800, with most standard exterior replacements landing between $1,100 and $2,400 and custom wood units running higher. Whole-house interior packages typically pencil out at $250 to $1,100 per opening once trim and hardware are included.
What pushes the number toward the top of that range
- Existing framing condition: A rotten sill or a rough opening that’s out of square adds demo, reframing and re-flashing time. On older Corte Madera homes this shows up more than you’d expect.
- Custom sizes and finishes: A non-standard width or height, a factory finish in a color that requires matching existing trim, or a non-stock swing all increase cost and lead time.
- Structural work: If the opening has to move or resize, that’s framing, header and possibly structural review; plan on the top of the range and longer schedule.
- Hardware and finish grade: High-end locks, security-rated deadbolts and smart-home integration sit at the top of the per-unit range.
- Permit scope: A straight replacement usually needs no permit; a new opening or a change to a structural rough opening does.
What’s in a written estimate and what isn’t
Our written estimate lists the unit, hardware, finish, trim, labor, disposal and site protection line by line, plus whatever permit or inspection fees apply. Not included: the labor to repair water damage behind a wall, custom-exterior design work, or any window work in the same wall (that lives with the wider Windows & Doors in Corte Madera scope). You get the number upfront, and what you see is what you pay unless you ask us to add something. If your project runs over $10,000, $1,000 comes off the total, and 0% financing for 18 months is available.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Do to a Door Installation
A door here gets shaped by the town’s split geography. The mid-century ranchers and split-levels from the 1950s to 1970s that make up most of what we see have framing that’s settled and often out of square, so a replacement door that hangs perfectly square in the shop still needs shimming and adjustment on site; that’s not a defect, it’s the house. On the creekside flats near Corte Madera Creek and the Town Center, flood-elevation and drainage realities sit behind the work: an exterior door at grade gets a raised threshold, a properly drained sill and a door-bottom seal that actually sheds water, because a wet wall at the entry is a direct line to rot. Hillside lots above town shift the priority the other way, so we spec harder exterior finishes and check every threshold for settled or heaving framing.
That same split shows up in the door hardware we’re asked for. Homeowners restoring pre-1970s houses on both sides of town want hardware, hinge and finish that matches the age of the house, so matching the original trim profile matters as much as the door itself. Corte Madera sits under the same regional permitting and inspection framework as the rest of Marin, and larger homes on tear-down-and-rebuild lots mean an increasing share of the work is new-construction door packages rather than one-for-one swaps. If your project grows into a full front-entry rebuild or a whole facade refresh, it becomes part of a full Windows & Doors scope. We cover the 94925 and 94976 ZIPs across Corte Madera and the surrounding neighborhoods.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Corte Madera
A single standard door installs in a day, whole-house interior packages run two to four days, and a custom or structural opening can take longer once demo and reframing are involved. Order lead time is separate: most stock doors are five to ten business days, custom wood doors four to six weeks. Call (866) 320-2646 for a schedule based on the actual doors you want.
A straight replacement in the same opening usually doesn’t need a permit, but a new opening, a resize or a structural change to the rough opening does. We confirm that with the local building department before work starts and pull the permit ourselves where one is required. Call us and we’ll tell you which category your job falls into.
Yes, most jobs stay inside the existing opening and don’t touch plumbing or structure, which keeps cost and disruption down. A relocation or resize crosses into framing and possibly plumbing if a wall moves, and we’ll flag that at the estimate stage. Call (866) 320-2646 to get an initial read on your layout before you commit to a plan.
Expect roughly $450 to $3,800 per installed door, with standard exterior replacements typically $1,100 to $2,400 and custom wood units at the high end. Framing condition, custom sizing, hardware grade and permit scope are what move the number. Call (866) 320-2646 for a line-item estimate, free and on-site.
Our workmanship is covered by the 730-Day Done Right Promise, and the door and hardware carry their manufacturer warranties as well. If a hinge sags, a lock misaligns or a seal fails inside that window, we come back and make it right. Call us and we’ll walk you through what the warranty covers for your specific units.
Get a Free Door Installation Estimate in Corte Madera
We’ll come to your home, measure every opening, and hand you a written line-item estimate for Door Installation in Corte Madera, CA. No pressure, no vague range. Calls are answered by a live person 24/7 at (866) 320-2646, and every technician who shows up is background-checked and in uniform. Many Corte Madera homeowners pair a door replacement with a new Vinyl Fence in Corte Madera or a Chain Link Fence in Corte Madera while we’re already on site; ask about bundling the fencing into one estimate.
Written by the team at Groundwork Construction Co.