Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Corte Madera, CA: What It Costs and How It Gets Built
A chain link fence in Corte Madera typically runs $3,500 to $9,000 installed, with most residential jobs landing in the $4,200 to $6,800 range depending on height, gate count, and how rocky the ground turns out to be. A standard side-yard or back-lot run takes one to two days on site once the permit clears. Call (866) 320-2646 for a free on-site estimate and a written line-item quote before any work is scheduled.
How a Chain Link Fence Goes Up Here, Stage by Stage
Chain link looks simple from the street. Under the surface it’s a measured sequence, and skipping a step shows up as a sagging top rail or a gate that drags within a year. Here’s how we run it, and where you make decisions.
1. Site walk and layout (day 1, about an hour)
We walk the property line with you and confirm exactly where the fence sits. This is where you decide property-line accuracy versus a fence set a foot inside the line for maintenance access. On lots near the Corte Madera Creek flats, we also flag grading and drainage swales so posts don’t sit in a seasonal water path.
2. Utility locate and marking (before we dig)
Every job starts with a call to 811 for underground utility marking. It’s free and it’s non-negotiable – hitting a gas or irrigation line is an expensive way to ruin a week. You’ll want to have your sprinkler layout and any private conduit handy, since the public locate doesn’t cover lines you own.
3. Demolition and post setting (day 1 to day 2)
Old fencing comes out, and posts get set in concrete footings sized to the soil and the wind load. Terminal posts – the corners, ends, and gate posts – get larger footings than line posts because that’s where the tension lives. Concrete needs roughly 24 hours to cure before you load it.
4. Framework, mesh, and tensioning (day 2)
Top rail, tension bands, and mesh go on once the footings are solid. This is the part that separates a tight fence from a wavy one. We stretch the fabric with a come-along and check every span by hand. Gates get hung last, and we open and close each one with you before we call it done.
5. Walkthrough and cleanup (same day)
We haul off old material and leftover concrete spoil, then walk the line with you. You sign off on the layout, the gate swing, and the finish. Anything that isn’t right at that point gets fixed before we leave the property.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Options: Picking the Right Spec for the Job
Chain link isn’t one product. The gauge of the wire, the coating, and the height change how the fence looks and how long it lasts. Here’s what you’re choosing between.
- Gauge of wire. 11.5-gauge is the standard residential weight. 9-gauge is noticeably heavier and pricier – worth it for a dog run or a fence that takes a hit from a ball. If you’re fencing a play area for kids or pets, the heavier wire resists bending.
- Vinyl-coated versus galvanized. Plain galvanized is the budget choice and ages to a dull gray. Vinyl coating in black, green, or brown doubles the lifespan against Marin’s wet winters and blends into planting. Black-coated mesh reads closer to an iron fence at a fraction of the price.
- Height. 4-foot is the common side-yard height. 5-foot is the sweet spot for pets. 6-foot gives you more privacy and security, but many Corte Madera lots have view corridors and rear setbacks that make tall fencing a design question, so confirm before ordering.
- Gates and hardware. A walk gate with a self-closing hinge and a keyed latch costs more than a basic gate but saves you grief. Drive gates need heavier posts and framing – plan for them early so the footings match.
- Top rail and tension wire. A tension wire along the bottom keeps mesh from lifting and curling. It’s a small line item that extends the fence’s clean look by years.
What a Chain Link Fence Costs in Corte Madera, CA
The honest range is $3,500 to $9,000 installed. Here’s what pushes a job toward either end.
- Linear footage and corners. A simple straight run is the cheapest per foot. Every corner, end, and gate adds a terminal post and footing, which raises the total.
- Ground conditions. Corte Madera’s hillside lots near the ridge often hit rock or old fill within a foot or two. Hand-digging around rock or requiring a concrete pin adds labor.
- Coating and gauge. Vinyl-coated, heavier-gauge mesh adds material cost but cuts long-term replacement.
- Gates. A walk gate is one line item; a wide drive gate with heavier framing is another.
- Permit and survey scope. Some lots need a surveyor’s line before we can set posts accurately – that’s a separate cost.
A written estimate will spell out footage, post spacing, gauge, coating, gate count, and whether a permit is included. What’s often not included: surveyor fees, removal of unusually buried old footings, and landscape repair after we dig. We flag those up front so there are no surprises. Upfront pricing, no surprises – the number you see is the number you pay. Call (866) 320-2646 for an exact quote on your line.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Specifically Do to This Job
Corte Madera sits at the heart of Marin’s flood-plain and hillside split, and that dual condition shapes fencing here in ways it doesn’t in neighboring towns. On the low-lying flats near Corte Madera Creek and around the Town Center, many parcels carry flood-zone elevation and drainage requirements, so we route post footings and grading to keep water moving away from the fence line rather than pooling under it. Seasonal flooding in the marsh areas can heave a shallow footing, which is why we set posts deeper on those lots. Up the hill, the 1950s to 1970s ranchers and split-levels often have property lines running along old retaining walls or slope edges, so a fence here frequently pairs with drainage correction and slope work. We cover these lots as part of our Corte Madera service area, and homeowners often pair a new fence with Concrete Driveways & Concrete Work in Corte Madera when the driveway edge is where the fence line lands. The marine climate – wet winters, salt air off the bay – is why coated mesh outlasts plain galvanized on the flats. If you’re planning the fence as part of a larger yard rebuild, see our Fence Installation service or the full Fence Installation in Corte Madera page.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Corte Madera
Most residential jobs take one to two days on site once the permit is in hand. Permit turnaround can add a week or two depending on the lot’s flood-zone status and whether a survey is required. Call (866) 320-2646 and we’ll give you a realistic timeline for your property.
Many Corte Madera fence projects require a permit, and flood-zone parcels near the creek often face extra review. We pull the permit and manage the inspection as part of the job. Call (866) 320-2646 to find out what your specific lot needs.
In most cases yes, but footings can hit irrigation lines, private conduit, or old drainage. The 811 locate covers public utilities; you’ll want to mark anything you own. If a footing lands on something buried, we redirect the post rather than cut through it. Call (866) 320-2646 to talk through your site.
Expect $3,500 to $9,000 installed, with most jobs in the $4,200 to $6,800 range. Linear footage, coating, gate count, and ground conditions are the biggest swing factors. Call (866) 320-2646 for an exact written quote – estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers workmanship on posts, framing, and gates. Call (866) 320-2646 with questions about coverage on your job.
Get a Free Chain Link Fence Estimate in Corte Madera
If you’re pricing a chain link fence in Corte Madera, start with a free on-site estimate. We’ll measure the line, talk through gauge, coating, and gate placement, and hand you a written line-item quote with the permit scope spelled out. No pressure, no vague ranges. Call (866) 320-2646 and a live person picks up around the clock to get you scheduled.
Written by the team at Groundwork Construction Co.