Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Corte Madera: What the Job Actually Involves
Impact windows and doors in Corte Madera typically run $8,000 to $25,000 for a whole-house package, and most single-family installs take three to five working days once the units arrive. The work means removing the existing sash or slab, fixing or rebuilding the rough opening, setting laminated or reinforced glazing rated for wind-borne debris, and sealing the perimeter to withstand driven rain. Call (866) 320-2646 and we’ll walk your house and give you a written line-item quote.
How We Run an Impact Window & Door Install, Stage by Stage
Every job follows the same spine, but the sequence matters more than most homeowners expect. Here’s what actually happens between the first visit and the final walkthrough.
Stage 1: On-site measure and product selection (day 1, about 90 minutes)
We measure every opening, photograph the existing frames, and check whether the rough openings are plumb and square. On a 1960s Corte Madera rancher, that check often turns up settled headers or out-of-square jambs from original framing, which changes the plan. You’ll choose glazing type, frame material, and finish at this visit so the order can go out the same week.
Stage 2: Ordering and permit filing (weeks 1 – 6, lead time varies)
Impact units are custom-built to your openings, so lead time runs four to six weeks on most orders. In parallel we file the permit. In Corte Madera, replacement of exterior openings on homes in the flood zone often pulls in elevation paperwork, so we start that early rather than discovering it at inspection.
Stage 3: Prep and demo (day 1 of install, one to two openings at a time)
We protect floors and furniture, remove trim and the old unit, and inspect the rough opening for rot or water damage. If the framing is sound, the opening gets squared and flashed. If it isn’t, you get a call with a price before anything goes further.
Stage 4: Setting, flashing, and sealing (days 2 – 3)
Units are shimmed, fastened, and sealed with a compatible flashing system and low-expansion foam. On the marine-facing side, we’re particularly careful about the sill pan detail, because driving winter rain finds any gap there. Sealing and trim go in the same visit.
Stage 5: Inspection and walkthrough (final day)
The city inspects the installation against the permit scope. Then we walk every opening with you, demonstrate operation and locks, and hand over warranty documents. Our 730-Day Done Right Promise covers the workmanship, so anything that shows up in the first two years gets fixed without a debate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the real decisions happen at the measurement visit. Here’s the honest trade-off on each.
- Laminated glass vs. reinforced film glazing: Laminated is the gold standard for debris resistance and sound deadening, and it’s what most Corte Madera buyers pick. Reinforced film is slightly less expensive but won’t perform the same way in a real impact event.
- Vinyl frame vs. aluminum frame: Vinyl insulates well and holds up in coastal salt air without corrosion. Aluminum is slimmer and can carry larger panes, but needs a thermal break to avoid condensation on cold mornings.
- Fixed vs. operable configurations: Fixed panes cost less per square foot and offer more glass. Operable casement and awning units give you ventilation but add hardware cost. ECO Window Systems and ViewLux both offer a range that fits a Marin house without looking industrial.
- Entry door style: Therma-Tru fiberglass impact doors are popular here for their stability in wet weather and their range of finish options. A premium wood door matches a Craftsman or carriage-house look but needs more upkeep.
- Hardware and finish: Bronze and black are the two most common choices on Corte Madera homes. Custom colors add a small upcharge but tie the whole facade together.
What Impact Windows & Doors Cost in Corte Madera, CA
A full-house impact package here lands between $8,000 and $25,000. That’s a wide swing, and it comes down to five variables:
- Number and size of openings: Each opening carries fixed labor and hardware cost. A 12-opening ranch runs toward the low end; a 30-opening split-level pushes toward the top.
- Existing condition: Rotted framing or out-of-square openings add carpentry and sometimes structural repair.
- Glazing grade: Laminated impact glass costs more than standard insulated glass but is the point of the job.
- Frame material: Vinyl is the value pick; aluminum with a thermal break runs higher.
- Permit scope: If the permit requires flood-elevation documentation, that adds both time and paperwork cost.
A written estimate covers the units, labor, flashing and sealant, trim, permit fees, and haul-away. What it typically doesn’t cover is structural repair behind the wall, which we’ll only know once the old unit comes out. We price that in writing before we proceed. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (866) 320-2646 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Specifically Do to This Job
The housing stock here shapes the work. Corte Madera is a town of mid-century ranchers and split-levels from the 1950s through the 1970s, many on original framing that’s now sixty-plus years old. When we open a wall in a home off Corte Madera Avenue or near the Town Center, we frequently find that the original window headers have settled or that water has worked into the sill framing over decades of marine weather. That’s not a surprise, and we plan for it so it doesn’t derail the schedule.
The other local wrinkle is where the house sits. The low-lying flats near Corte Madera Creek sit in a designated flood zone, and exterior work on those homes often brings elevation and drainage paperwork into the permit scope. Properties on hillside lots above town face the opposite constraint: driven rain and erosion stress on the exterior envelope. In both cases, the seal and flashing detail is the part that fails first and the part we spend the most time getting right. If you’re refreshing the exterior as part of a broader pass, our Windows & Doors in Corte Madera page covers the full scope.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQ: Impact Windows & Doors in Corte Madera
Most single-family installs are completed in three to five working days of on-site labor, with a four-to-six-week product lead time before we start. The schedule depends on the number of openings and whether any framing repair is needed. Call (866) 320-2646 and we’ll give you a realistic date range for your house.
Yes. Replacing exterior openings requires a permit in Corte Madera, and the inspection covers the installation and flashing detail. On homes in the flood zone, the permit may also pull in elevation documentation. We handle the filing and the inspection as part of the job, so you’re not chasing paperwork.
In most cases yes, if the rough opening is sound. The old unit comes out and the new one sets into the same opening. If we find rot or settled framing once the wall is open, we stop and quote the repair before continuing. We don’t start a surprise line item.
The range is $8,000 to $25,000 for a whole-house package, depending on opening count, glazing grade, frame material, and permit scope. Call (866) 320-2646 for an exact quote. Estimates are free and upfront, and our Windows & Doors service overview shows how this fits into a wider exterior refresh.
Every impact window and door install we complete is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we make it right. Product warranties from the manufacturer come alongside it.
Get a Free Estimate for Impact Windows & Doors in Corte Madera
If you’re weighing impact windows and doors for a home in Corte Madera, start with a walk-through. We’ll measure every opening, check the framing, and give you a written line-item quote with the permit scope spelled out. Our technicians have up to 12 years of experience, they arrive in uniform and background-checked, and a live person answers the phone around the clock. Call (866) 320-2646. Homeowners often pair this work with Aluminum Fence in Corte Madera or an Iron Fence in Corte Madera to finish the property line at the same time.
Written by the team at Groundwork Construction Co.