A Groundwork company - serving San Francisco, CA
Iron Fence in Pacifica, CA | Groundwork Construction Co. of San Francisco

Iron Fence in Pacifica - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Pacifica, CA: What the Job Actually Involves

An iron fence in Pacifica, CA typically runs $3,500 – $9,000 for a standard residential run, with most homes landing in the $4,800 – $7,200 range once posts, footings, finish and gate hardware are counted. Plan on 3 – 6 working days on site, plus 2 – 4 weeks ahead of that for fabrication and any coastal permit review. Call (866) 320-2646 for a free on-site estimate. The number you see is the number you pay, and every install carries our 730-Day Done Right Promise.

Call (866) 320-2646

How an Iron Fence Goes In, Stage by Stage

Iron fencing isn’t a pick-it-off-the-shelf job. The panels are built to your measurements, and the site conditions here decide half the plan before a single hole gets dug. Here’s the real sequence.

Stage 1: Walk-through and measurements (day 1, about 90 minutes)

We walk the property line with you, confirm exactly where the fence runs, and check what’s underground and overhead. On Pacifica’s sloped marine-terrace lots, that often means flagging drainage swales, existing irrigation, and any utility stubs. You decide the run, the gate locations, and whether this is part of a full Fence Installation in Pacifica project touching the rest of the yard. We take grades and set elevations; on a hillside, a fence that steps with the terrain reads very differently from one held level.

Stage 2: Permits and HOA sign-off (days 2 – 10, mostly waiting)

Height rules, property-line verification and, on bluff-adjacent lots, coastal development review all get handled here. We pull the permits and pass the inspections; you don’t chase paperwork. If your parcel has an HOA, this is also when finish color and fence height get approved in writing.

Stage 3: Fabrication (days 10 – 21)

Panels, posts and gates are cut and welded to the final dimensions. You pick the metal, the finish and the picket spacing at the quote stage, so nothing gets rebuilt later. This is the longest single stretch, and it’s where a rushed shop gives you a fence that fits badly.

Stage 4: Setting posts and footings (days 1 – 2 on site)

Posts go into concrete footings dug to depth and set plumb. On sloped Pacifica lots, footing depth and drainage matter more than on flat ground, since winter runoff is the thing that eventually moves a post. We set the line and check it against the survey before any concrete goes in.

Stage 5: Hanging panels, gates and final inspection (days 3 – 6 on site)

Panels mount to the posts, gates get hung and adjusted, hinges and latches go in, and the whole run gets a final check for alignment and any finish touch-ups. The inspection closes out, and we walk the job with you before we call it done. Anything that isn’t right gets fixed under the 730-Day Done Right Promise, in writing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Iron fencing is a category, not one product. These are the real decisions, and each one moves the price and the lifespan.

  • Wrought iron vs. steel: Traditional wrought iron is hand-forged, heavier, and priced at the top of the range. Steel is stronger per pound and far more common now, and it holds up better against the salt air if the finish is right. For most Pacifica homes, steel is the honest pick.
  • Powder-coated vs. painted finish: Factory powder coating resists coastal corrosion far better than field paint, and it’s worth the upcharge here. It also holds its color longer in the fog belt.
  • Picket spacing and height: Tighter spacing and taller runs cost more in material and weight. If the fence is a boundary marker rather than a security line, wider spacing saves money.
  • Gates and hardware: A single walk gate is a modest add; a double drive gate with self-closing hinges and a keyed latch pushes the job toward the high end. Decide this early, since gates are fabricated with the panels.
  • Post caps and finials: Decorative tops are a small line item that changes the look substantially. Worth deciding at the quote, not after.

Where the finish and hardware matter most, we specify top-tier brands, the same way we’d spec James Hardie or KraftMaid on a build. Quality materials are the difference between a fence that lasts a decade and one that lasts a generation.

What Iron Fence Costs in Pacifica, CA

Expect $3,500 – $9,000 for a typical residential iron fence in Pacifica, with most jobs in the middle of that band. Here’s how the number breaks down before you commit.

Line item Typical range
Fence material and fabrication (per linear foot) $45 – $95
Post setting, footings and concrete $600 – $1,800
Walk gate (hung and latched) $400 – $1,200
Double drive gate $900 – $2,500
Permit and inspection fees $150 – $600
Powder-coat finish upgrade $300 – $900

What pushes a job to the low end: a short, straight run on level ground, steel rather than wrought iron, a single walk gate, and no permit complications. What pushes it high: a long run on a steep hillside lot, multiple gates, coastal permit conditions, and a premium finish. Removing an old fence adds demo time.

Your written estimate itemizes everything: linear footage, post count, gates, finish, permits and disposal. What’s typically not included is correcting an existing footing or drainage problem found once we dig, which we flag and quote before proceeding, not after.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Pacifica Homes Specifically Do to This Job

Pacifica’s climate is the single biggest factor in how an iron fence here lives or dies. The coastal fog belt, salt-laden onshore winds and heavy winter storms off the Pacific attack fasteners and finishes relentlessly, which is why corrosion-resistant steel and a factory powder coat aren’t optional upgrades on this coast. The housing stock matters too: the 1950s – 70s stucco-and-wood ranch homes and split-levels, plus the older beach cottages around Rockaway and Linda Mar, often sit on sloped lots with existing drainage quirks that a new fence has to work around. On bluff-edge and marine-terrace properties, footing depth and erosion control get more attention than anywhere inland, since a footing that looks solid in August can be undermined by winter runoff. Permitting reflects that: coastal development review and, on some parcels, geotechnical scrutiny come into play before a fence line on a bluff-adjacent lot can proceed.

Serving Pacifica, CA – Our Local Coverage Area

We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Pacifica

Get a Free Iron Fence Estimate in Pacifica

A free on-site estimate starts with a call to (866) 320-2646. We’ll walk your property, measure the run, talk through steel versus wrought iron and finish options, and hand you a written, itemized quote with no surprises. If you’re also planning a patio or walkway refresh, homeowners often pair this with Patios, Walkways & Pool Decks in Pacifica, and for larger projects a ADU Design & Permitting in Pacifica conversation; our wider Fence Installation service covers the full scope, and we serve all of Pacifica. Live person answers, 24/7. $1,000 off projects over $10,000, plus 0% financing for 18 months.

Written by the team at Groundwork Construction Co.

Why Pacifica Chooses Groundwork Construction Co. of San Francisco

We set the standard for iron fence in Pacifica.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Pacifica

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Pacifica Customers Say

Trusted by homeowners across Pacifica and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Pacifica?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Pacifica.

(866) 320-2646

Request a Free Estimate in Pacifica

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch