Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Larkspur, CA: What the Job Actually Involves
Custom and geometric windows in Larkspur, CA typically run $6,500 to $28,000 for a whole-house package, or $1,800 to $6,500 for a single arch, radius, or angled unit, and take six to twelve weeks from templating to final glass set. These aren’t stock units: every window is measured, drawn, and fabricated to fit a specific opening, which is why the schedule is driven by the build, not by the install. Call (866) 320-2646 to schedule a free on-site estimate.
How custom and geometric window work happens, stage by stage
We run this job in five stages, and the pace depends heavily on how unusual your openings are. Most Larkspur homes move through the first four stages in about two weeks, then wait on fabrication.
Stage 1: Site measurement and template (2 – 3 hours)
We measure every opening to the sixteenth of an inch, photograph the existing trim, and check level and plumb on the rough framing. For arches and radii, we build a physical template or take a digital trace, because a three-eighths-of-an-inch bow in a framing member will show up as daylight around a curved sash. You decide whether the new unit replicates the existing shape or changes it, and whether trim detail stays true to the original.
Stage 2: Product selection and order (day 2 – 3)
This is where you lock in frame material, glass package, grille pattern, and finish. Our window partners include Andersen, Marvin, and ECO Window Systems, and we’ll pull comparable quotes across those lines so you can see what the price difference buys. Once you sign off, the order goes into fabrication. Custom arch and radius units run four to eight weeks. Straight custom sizes run three to five.
Stage 3: Prep and rough-in (1 – 2 days)
We protect floors and landscape, remove the old unit, and inspect the framing and flashing behind it. Older Larkspur walls are where surprises live: water-stained sheathing, a header that was never sized right, or knob-and-tube wiring running through the opening. If we find rot behind a sill, we fix it before any new unit goes in, and that repair gets called out before it happens, not invoiced after.
Stage 4: Installation and sealing (1 – 2 days per window group)
Units set square, shimmed, and anchored per manufacturer spec, then flashed and sealed with the right transition membrane at the wall. On geometric windows the waterproofing matters more, because a curved head doesn’t shed water the way a flat one does. Your only decision here is schedule: we usually batch front-of-house windows into one visit.
Stage 5: Trim, finish, and final walkthrough (1 day)
Interior casing, sill caps, and exterior trim go back on, we prime and caulk paint-grade surfaces, and we walk every opening with you. Full perimeter seals, smooth operation, no gaps. Every project is covered by our 730-Day Done Right Promise, and our technicians have up to 12 years of experience on installations like this.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on a geometric window
There’s no single right answer here, but there are honest trade-offs. Here’s what actually comes up:
- Wood frame with aluminum cladding. Best for matching downtown Victorians and bungalows. Warm interior, low exterior maintenance, and a clean look against historic trim. Costs more and the lead time is longer. Andersen and Marvin lines sit in this range.
- Vinyl and cellular PVC. Lower cost, strong weather resistance, and a realistic option for arched units where wood would be priced out of reach. Fewer finish options and a heavier visual profile.
- Glass package. A low-E, argon-filled double pane is the sensible default for Marin. If the window faces a wildfire-exposed slope on a hillside lot, ask about tempered glazing and a fire-rated assembly where code requires it.
- Grille pattern and muntin layout. A six-over-six pattern on a street-facing arch reads traditional. A single plate above a radius gives you a cleaner, more contemporary look. This is a character decision, so it’s worth standing on the sidewalk before you commit.
- Fixed versus operable. Lots of geometric units are fixed because they can’t open. That’s cheaper and tighter. Where you need ventilation, we’ll pair a fixed plate with an operable unit on the same elevation.
What Custom & Geometric Windows costs in Larkspur, CA
Plan on $1,800 to $6,500 for a single custom or geometric unit installed, and $6,500 to $28,000 for a multi-window package across the front or rear elevation. Typical line items:
What pushes a job to the high end: unusual shapes, historic trim replication, fire-rated assemblies on WUI-protected lots, and any rot behind the wall. What keeps it low: standard radius sizes, fixed units, and one elevation instead of four. A written estimate from us lists line items with no change orders on the work quoted, permits pulled, and inspection scheduled. It typically excludes any structural repair found after walls open and paint beyond touch-up. For a wider project scope, this is often part of a full Windows & Doors in Larkspur upgrade.
See the difference
Before
After
Before
After
Before
AfterWhat Larkspur homes specifically do to this job
Larkspur is built out and small, so nearly every geometric window job here means working within an existing structure, not starting clean. Lots in the hills and along canyon streets have tight setbacks and heavy tree canopy, which squeezes crane and staging space. Downtown, homes along Magnolia Avenue and the surrounding blocks are early-1900s Victorians and bungalows where a curved or arched opening is almost always matching an original detail, not adding a new one. That means historic trim replication matters, and Design Review scrutinizes any exterior change visible from the street more than it does in Corte Madera or San Anselmo. WUI fire-hardening rules can require fire-rated assemblies on windows facing wildfire-exposed slopes, and the wet-winter rainy season compresses the install window, so we schedule exterior work between storms. Homes here commonly pair new windows with Concrete Driveways & Concrete Work in Larkspur and, where curb appeal extends to the street, Asphalt Driveways & Resurfacing in Larkspur.
Serving Larkspur, CA – Our Local Coverage Area
We serve Larkspur and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Larkspur
Six to twelve weeks end to end, with six to eight of those weeks spent in fabrication for arch and radius units. The install itself is usually one to two days per window group. Call (866) 320-2646 for an accurate timeline on your specific openings.
Yes, almost always. Changing the size, shape, or number of openings requires a building permit, and exterior changes visible from the street may also go through Design Review. We handle the paperwork and inspection scheduling, so you’re not chasing the counter.
Yes, in most cases. If the new unit matches the existing opening size and shape, no plumbing or structural work is needed. Changing the opening means framing changes and possibly electrical relocation, which we flag at the estimate stage.
Expect $1,800 to $6,500 installed for a single custom or geometric unit, or $6,500 to $28,000 for a full elevation package. The variables are size, frame material, glass package, and condition of the wall. Call (866) 320-2646 for an exact quote.
Every installation carries our 730-Day Done Right Promise, plus the manufacturer’s own product warranty on the unit itself. If a seal, a sash, or an operable unit misbehaves, we come back and make it right.
Get a free on-site estimate for Custom & Geometric Windows in Larkspur
Call (866) 320-2646 to schedule a free estimate. We’ll measure your openings, talk through frame and glass options, and leave you with a written line-item quote, no surprises. Our windows and doors service covers Larkspur and the surrounding area, and you can see the full range of what we handle at our Windows & Doors hub. A live person answers every call.
Written by the team at Groundwork Construction Co.