Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in San Rafael, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in San Rafael typically runs $9,000 – $28,000 for a full rebuild, with a standalone walk-in shower installation landing between $4,500 and $12,000. Most jobs take two to four weeks of working time, longer if we’re relocating the drain, changing the footprint, or opening a wall in an older San Rafael house. Call (866) 320-2646 to schedule a free estimate and get a written, line-item number before anyone swings a hammer.
How a Walk-In Shower Gets Built, Stage by Stage
The sequence below is how a real walk-in shower job moves from first walkthrough to final walkthrough. It’s the same order every time, and the biggest schedule surprises come from what’s behind the wall, not from the tile choice.
1. Site visit and layout (day 1)
We measure the full shower envelope, check the drain location, and confirm whether the current pan is recessed into the floor or sitting on a framed curb. You pick the footprint here: linear drain at the wall, centered drain, or a curbless entry that channels water to a single slope. Curbless is the most requested and the most demanding on structure, because the floor joists usually need to be notched or a new subfloor recessed to buy the two inches of depth a flush pan needs. That decision drives everything downstream, so we don’t leave without it.
2. Demo and substrate inspection (days 2 – 3)
We pull the old shower to the studs and the subfloor, and this is where San Rafael surprises show up: old galvanized drain lines, cast-iron traps that have rusted through, sometimes a framing wall that isn’t plumb. If the drain needs new plumbing or the framing has to be corrected, that’s a change we price in writing before continuing. You also approve the waterproofing system now, because the wall assembly has to be built for it.
3. Rough-in and inspection (days 3 – 6)
New drain, new shower valve, blocking for grab bars and the glass panel, and the waterproofing membrane go in. Where the work is permitted, the rough plumbing and the pan inspection happen here, before any tile covers the evidence. We pull the permit and meet the inspector. You don’t chase paperwork.
4. Waterproofing and tile (days 6 – 12)
We flood-test the pan, then set tile or large-format slab on the walls and floor. Full slab walls go faster than small-format tile and have fewer joints to seal, but they’re heavier and costlier in material. Small-format mosaic gives better grip underfoot and hides a slightly imperfect slope. Tile install typically takes four to six working days for a standard shower.
5. Glass, trim, and final walkthrough (days 12 – 18)
The glass is templated only after tile is set, so there’s a one-to-two-week lead time on custom panels. We install the door and fixed panel, seal everything, set the fixtures, and walk the job with you. You get the full sequence in writing up front so you know what to expect on any given day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
A walk-in shower is a stack of independent decisions, and each one moves both the price and how the shower lives. Here’s what buyers genuinely weigh:
- Waterproofing system: a bonded sheet membrane (like a Schluter Kerdi system) versus a liquid-applied membrane. Sheet membranes cost more in labor but are the standard for a curbless pan. Liquid membranes are cheaper and fine for a curbed shower.
- Wall finish: large-format porcelain slab gives a seamless, easy-clean look and runs the material budget higher. Ceramic tile is the value play, more grout lines, more upkeep. Natural stone is the most expensive and needs sealing every year or two.
- Drain type: a linear drain lets you use a single slope and large tile straight to the drain. A centered point drain with mosaic tile is the budget option.
- Glass: frameless 3/8-inch tempered glass is the premium look and the premium price. Semi-frameless with a header bar is more stable in a wider opening and costs less.
- Fixtures: a thermostatic valve with a separate volume control holds temperature better than a single-handle pressure-balance valve. Kohler and Moen both build reliable upgrade lines; the difference is real on a shower you use daily.
What Walk-In Showers & Shower Remodeling Costs in San Rafael, CA
The full rebuild range is $9,000 – $28,000. A walk-in shower installation alone is $4,500 – $12,000, a shower replacement is $3,000 – $8,500, and a tub-to-shower conversion runs $3,500 – $10,000. What pushes a job from the bottom of the range to the top:
| Variable | Lower end | Upper end |
|---|---|---|
| Footprint | Standard 3×5 alcove | Oversized or curbless custom pan |
| Existing plumbing | Reuse drain and valve location | Relocate drain, new valve, new supply lines |
| Wall material | Ceramic tile | Large-format porcelain slab or natural stone |
| Glass | Semi-frameless with header | Custom frameless with door |
| Framing and structure | Level, sound subfloor | Rot repair, joist notching, new subfloor |
A written estimate from us includes demo, disposal, substrate repair within reason, waterproofing, tile labor, glass, and fixtures if you buy through us. It typically excludes permit fees (billed at cost) and structural or plumbing surprises found after demo, which we price separately in writing before proceeding. The number you see is the number you pay for the scope listed. Call (866) 320-2646 for an exact quote on your San Rafael shower.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to a Shower Job
San Rafael is the seat of Marin County, and the housing stock here runs from early-1900s craftsman and bungalows in the West End and downtown grid to mid-century ranch and split-levels in Terra Linda and up the hillsides above Dominican. Much of it predates 1970. That matters for a shower: we routinely open a wall and find galvanized supply lines or a cast-iron trap that needs replacing before we can set a new pan, and the electrical for a heated floor or a fan often needs a dedicated circuit where the old house only has one. Hillside lots above downtown bring their own wrinkle, where uneven framing and settled foundations mean we’re correcting the wall before we waterproof it. Permitting here runs through the city and takes longer than in many inland towns; we pull it, schedule the inspections, and handle the paperwork as part of any Bathroom Remodeling in San Rafael project. The same pre-war plumbing and structural surprises show up across San Rafael, and homeowners on sloped lots sometimes pair shower work with Roof Replacement & Installation in San Rafael or Metal Roofing in San Rafael to handle drainage and weatherproofing in one pass. For the broader scope our Bathroom Remodeling service covers, we can fold the shower into a larger plan.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in San Rafael
Most walk-in showers take two to four weeks of working time, and the glass templating adds one to two weeks of lead time before the final install. Add a week or more if we’re relocating the drain or correcting framing in an older house. Call (866) 320-2646 and we’ll give you a realistic calendar for your specific job.
Yes, if you’re moving the drain, changing the valve, or relocating any plumbing, a permit and inspection are typically required. A straight tile and fixture refresh in the same footprint sometimes doesn’t. We pull the permit and meet the inspector as part of the job. Call (866) 320-2646 to talk through your scope.
Often, yes. If the existing drain and valve can stay put and the subfloor is sound, we can convert the footprint to a curbless entry with minimal structural work. The biggest cost driver is a curbless pan where the joists need notching. We’ll tell you honestly at the estimate which side of that line you’re on. Call (866) 320-2646 to schedule a free on-site look.
A full walk-in shower rebuild runs $9,000 – $28,000, and a standalone installation is $4,500 – $12,000 depending on footprint, glass, and finish. Relocating plumbing, correcting framing, or upgrading to slab walls pushes you toward the top. Call (866) 320-2646 for an exact quote, and we’ll put it in writing line by line.
Every walk-in shower we build is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Tile, waterproofing, and fixtures are all covered, and the guarantee runs 730 days from final walkthrough. Call (866) 320-2646 to get the details in writing.
Get a Free Estimate for Your San Rafael Walk-In Shower
Call (866) 320-2646 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in San Rafael. We’ll measure the space, check the drain and subfloor, and hand you a written line-item quote with no-hassle upfront pricing, plus our 730-Day Done Right Promise. Expect a live person on the call, 24/7, and a real number in writing before you commit. Questions before you call are welcome too.
Written by the team at Groundwork Construction Co.