Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Larkspur, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Larkspur runs $9,000 – $28,000 for a full rebuild and typically takes three to five weeks from demo to final inspection, depending on whether plumbing moves and how much of the surround is tiled. A straight shower replacement with no layout change can land closer to $4,500 – $12,000, while a curbless, frameless wet-room build on a hillside home here pushes toward the top of the range. Call (866) 320-2646 for a free on-site estimate with a written, line-item quote.
How a Walk-In Shower Rebuild Actually Runs, Stage by Stage
Most contractors hand you an optimistic number and disappear. Here’s the real sequence, with what you decide and when, so nothing gets improvised three weeks in.
Stage 1: Estimate and layout decision (1 – 2 hours on site)
We measure the existing pan, check the drain location, and confirm what’s behind the wall. This is where you pick the footprint: a like-for-like replacement, a wider walk-in that borrows a few inches from a closet, or a full redesign that moves the drain. Moving the drain is the single biggest cost fork, so we settle it before any paper gets signed.
Stage 2: Demo and substrate (2 – 3 days)
Out comes the old tile, pan, and often decades-old drywall. On Larkspur homes built in the 1920s through the 1960s, we regularly find rot at the curb and failed vapor barriers behind the tile, which has to be cut back and replaced before anything new goes in. This is the stage that surprises people on cheap bids: we price the repair as a line item, not a change order later.
Stage 3: Rough-in, plumbing, and inspection (2 – 4 days)
New drain, valve, and waterproofing membrane go in. If the valve moves or a bench or niche goes in, the wall framing gets reconfigured. A pressure test on the pan confirms the liner holds water before a single tile is set. This is where a permit inspection happens in most cases, and we don’t tile over anything that hasn’t passed.
Stage 4: Tile, glass, and fixtures (5 – 8 days)
Waterproofing cures, then tile goes up, walls and floor. Grout cures for a full day before the glass template gets measured. Frameless enclosures are fabricated to the opening, so that measurement has to be exact, and the fabricator’s turnaround adds a few days. Fixtures, niche shelves, and the shower head go in last.
Stage 5: Final inspection and walkthrough (1 day)
Inspection, a water test, and a walkthrough where you check the slope, the door swing, and the caulk lines yourself. Any punch item gets fixed before we close the job, and everything is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the budget swings happen at these decisions. Here’s the honest trade-off on each:
- Curbless vs. low-threshold pan: Curbless is the cleanest look and better for aging in place, but it needs a recessed floor and a re-engineered drain, which adds labor. A low-threshold pan is quicker and cheaper but shows a lip.
- Large-format porcelain vs. smaller ceramic: Large-format (24″ x 48″ or bigger) means fewer grout lines and easier cleaning but demands a dead-flat substrate and careful cuts, so install cost rises. Smaller tile hides a slightly imperfect wall and costs less to set.
- Frameless glass vs. framed: Frameless glass (often Kohler) is the showroom look and keeps a small shower feeling open. It costs more and needs exact measuring. Framed enclosures are cheaper and more forgiving on an out-of-square opening.
- Solid-surface pan vs. tiled pan: A molded acrylic or solid-surface pan is fast, leak-resistant, and the safest bet. A tiled pan lets you match the walls but depends entirely on membrane quality.
- Tile-in niche and bench: A bench is a real comfort upgrade but adds framing, waterproofing, and tile. A prefab niche is cheap and quick; a tiled one takes more labor.
- Waterproofing system: A bonded sheet membrane or a liquid-applied system are both valid; the key is that the whole assembly is one continuous, tested system, not patched together.
What Walk-In Showers & Shower Remodeling Costs in Larkspur, CA
Plan on $9,000 – $28,000 for a full walk-in rebuild in Larkspur. A straight replacement sits at $3,000 – $8,500, and a dedicated walk-in install lands at $4,500 – $12,000. Here’s what moves the number:
| Line item | Typical range |
|---|---|
| Shower replacement (no layout change) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Full walk-in rebuild with tile and glass | $9,000 – $28,000 |
The variables that push a job toward the low or high end:
- Footprint and layout: a like-for-like rebuild is the cheapest path. Moving the drain or expanding into a closet adds framing, plumbing, and sometimes structural work.
- Existing condition: rot, failed membranes, or old galvanized plumbing found behind the tile means repair before rebuild.
- Material grade: large-format porcelain and frameless glass cost more than ceramic and a framed enclosure.
- Permit scope: plumbing and structural changes require permits and inspections; a cosmetic swap may not.
- Glass and fixture choices: custom-cut glass and premium fixtures add real dollars.
A written estimate from us spells out demo, substrate repair allowance, waterproofing, tile, glass, fixtures, permit, and cleanup. What it typically doesn’t include: hidden rot beyond the allowance, and structural surprises only found after opening the wall. We flag both upfront so the number you see is the number you pay on the scope we quoted. Call (866) 320-2646 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Larkspur Homes Specifically Do to This Job
Larkspur is a small, largely built-out Marin town, which means almost every shower job here is a remodel inside an existing footprint, not new construction. Much of the housing stock is early-1900s Victorians and bungalows along Magnolia Avenue and mid-century hillside homes, so we routinely find original plumbing, out-of-square walls, and failed vapor barriers behind older tile. The town’s Design Review process scrutinizes exterior changes visible from the street more than neighboring Corte Madera or San Anselmo does, so any window or vent change tied to the shower gets planned early. Larkspur also prizes its small-town character, and contractors here work tight, tree-canopied lots where staging and debris hauling need a plan. Wet winters squeeze the schedule, so we build in weather buffers rather than promise dates that slip. Hillside homes in the canyon areas often need drainage attention alongside the shower work. If your project grows into a wider scope, our Bathroom Remodeling in Larkspur page covers the full picture, and homeowners across Larkspur pair shower work with exterior upgrades like Roof Replacement & Installation in Larkspur and, on fire-hardening projects, Metal Roofing in Larkspur.
Serving Larkspur, CA – Our Local Coverage Area
We serve Larkspur and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Larkspur
Most jobs take three to five weeks from demo to final inspection. The timeline stretches if plumbing or framing moves and shortens on a straight replacement. Call (866) 320-2646 for a schedule tied to your actual layout.
You need a permit when plumbing, structural, or electrical work changes; a cosmetic tile-and-fixture swap often doesn’t. We pull the permit and pass the inspection as part of the job. Call (866) 320-2646 to confirm what your project needs.
Yes. A like-for-like rebuild that keeps the drain in place is the most common path and the most affordable. Call (866) 320-2646 and we’ll tell you on site whether your layout allows it.
Most full rebuilds run $9,000 – $28,000, with walk-in installs at $4,500 – $12,000 and straight replacements at $3,000 – $8,500. Call (866) 320-2646 for an exact written quote; estimates are free.
Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not right, we make it right. Call (866) 320-2646 to schedule.
Get a Free Estimate on Walk-In Showers & Shower Remodeling in Larkspur
Call (866) 320-2646 to schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Larkspur. We’ll measure the shower, check the drain and substrate, talk through layout and material options, and hand you a written line-item quote with upfront pricing. A live person answers around the clock, and there’s no cost or obligation to get the number.
Written by the team at Groundwork Construction Co.