Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in San Rafael: What Storm-Ready Really Means
Custom & Geometric Windows in San Rafael run roughly $4,500 to $15,000, with impact-rated configurations climbing toward the $25,000 line when the whole envelope is being hardened. Most angled, arched, and trapezoidal units take three to six weeks from template to installation, because every one is built to a field measurement of your opening. If you’re pricing this before the next wind event, call (866) 320-2646 and we’ll walk the openings with you.
How We Build and Install This Job, Stage by Stage
Geometric and custom windows aren’t bought off a shelf. The order of operations matters more than the catalog does, and here is how it actually runs.
Stage 1 – Field measure and template (day 1, two to three hours)
Every angle, radius, and out-of-square opening gets measured and, where needed, templated. On the older San Rafael homes we work in, walls are rarely plumb, so the measurement is the whole ballgame. You decide the performance target here: standard double-pane, or wind-rated and impact-rated glass that satisfies the local requirements for your elevation.
Stage 2 – Final drawing approval (day 2 to 5)
You sign off on the shop drawing: the actual shape, the mullion layout, the operating style, and the finish. This is where a change of mind is nearly free. Once the drawing is signed, the unit goes into fabrication and becomes difficult to alter.
Stage 3 – Permit and fabrication (six to twelve working days, depending on city review)
We pull the permit and the unit is built to the signed drawing. Custom shapes don’t move fast in a factory the way standard sizes do, so this window is real time, not a fill-in.
Stage 4 – Prepped demolition and framing (day 3 of the install, one to two days)
The old unit comes out, the rough opening gets trued up, and any framing, flashing, or shear connection the new window needs goes in before the new unit does. On hillside homes above downtown San Rafael, this is also where we find the soft framing, old galvanized connections, or failed flashing that nobody could see from inside.
Stage 5 – Set, seal, trim, and final walkthrough (day 4, one to two days)
The new unit is set level and plumb, sealed, trimmed out, and checked at the final walkthrough. We leave you a clear record of what was installed and what the warranty covers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Geometric Window
The shape is fixed by your wall. Everything else is your call, and each choice has an honest trade-off.
- Glass performance: standard double-pane costs less up front but won’t shed wind-borne debris. Wind-rated and impact-rated laminated glass is the right call for hillside and exposed elevations in San Rafael, and it’s the higher line on the estimate.
- Frame material: vinyl is the value option and the most limited in custom shapes. Aluminum handles tight radii and large spans cleanly. Wood and wood-clad units give the best fit and finish on a craftsman or bungalow facade, and they carry a premium.
- Shape and mullion layout: a simple arch or trapezoid is straightforward. A triangular gable cluster or a multi-unit mullion assembly adds fabrication time and a higher framing load on the wall.
- Operating style: awning, casement, fixed, or a combination. Fixed units in a geometric assembly save cost; operable units in the same assembly add hardware and complexity.
- Finish: factory-finish versus field-painted trim. Factory finish is more durable on a San Rafael hillside; field paint allows a closer match to an existing palette.
What Custom & Geometric Windows Costs in San Rafael, CA
Custom & Geometric Windows in San Rafael land between $4,500 and $15,000 for a typical project, and impact-rated configurations push toward $8,000 to $25,000 when the whole envelope is being hardened. The number you get should be line-item, in writing, and should hold.
The variables that move it:
- Shape complexity: a single arch is one fabrication path; a triangular cluster with three mullions is another entire week of factory time.
- Size and span: large geometric units need heavier framing and hardware and drive the upper end of the range.
- Existing condition: rotted framing, failed flashing, or out-of-square walls discovered at demolition add rough-opening repair before the new unit goes in.
- Glass performance grade: wind-rated and impact-rated laminated glass is a real cost step over standard double-pane, and it’s often required, not optional.
- Permit scope: if the window is part of a larger structural change, the review is deeper and the timeline longer.
Included in a written estimate: the field measure and template, the shop drawing, fabrication, the permit, prep and framing, set and seal, trim, and cleanup. Not included: corrective framing or flashing repair discovered after demolition (we quote it before we proceed, never after), and painting or finish touch-up outside the factory finish, which is handled separately and disclosed up front.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the seat of Marin County and sits where the 101 corridor meets older, settled neighborhoods. The housing stock ranges from early-1900s craftsman and bungalow homes in the West End and the downtown grid to mid-century ranch and split-level houses on the hillsides and in Terra Linda. Much of it predates the 1970s, so old wiring, older plumbing, and soft-story or foundation conditions recur. That matters for a geometric window because the wall behind it is usually as old as the house. In the hillside neighborhoods above downtown and Dominican, homes sit on steep lots behind retaining walls and cribbing, and we routinely find drainage and slope-stability issues that a flat-lot job never sees. Because San Rafael permits through the city, with added scrutiny in coastal-zone areas and older overlays, window work on a pre-war bungalow is documentation-heavy. That is the work we do here. It’s also why we pair a window job with a full Windows & Doors in San Rafael scope when the envelope is being hardened, and why homeowners often pair a hillside window job with Concrete Driveways & Concrete Work in San Rafael or Asphalt Driveways & Resurfacing in San Rafael while the equipment is already on the property.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in San Rafael
Plan on three to six weeks from signed drawing to installed unit, with the installation itself typically one to two days. Fabrication is the long pole, and city review can add a week. Call (866) 320-2646 for a schedule based on your actual openings.
Yes. Window replacement and any alteration to a rough opening require a permit in San Rafael, and the review here is more documentation-heavy than in a neighboring inland town. We pull the permit and pass the inspection as standard, and it’s on a written estimate.
Usually yes. A geometric window replaces an existing opening in most jobs, and no plumbing or structural work happens unless the new unit is larger or the framing is found rotten at demolition. We quote that repair before we proceed, never after.
Expect $4,500 to $15,000 for a typical project, and $8,000 to $25,000 for a fully impact-rated envelope. The shape, span, glass grade, and any hidden framing repair set where your job lands in that range. Call (866) 320-2646 for a line-item quote – the estimate is free.
Every window we install is covered by our 730-Day Done Right Promise, backed in writing, plus the manufacturer’s warranty on the unit itself. If the installation isn’t right, we make it right. It’s straight stated and it holds.
Get a Free Custom & Geometric Window Estimate in San Rafael
If you’re weighing a custom or geometric window now, before the next wind event, call (866) 320-2646 to schedule a free on-site estimate. A live person answers, 24/7, and a background-checked technician walks the opening with you, measures it, and leaves a written line-item quote with no surprises. Our technicians bring up to 12 years of experience to the job. No-hassle upfront pricing, and 0% financing for 18 months is available on qualifying projects.
Written by the team at Groundwork Construction Co.