Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in San Rafael, CA: What It Takes and What It Costs
Concrete driveway installation in San Rafael runs $4,500 – $12,000 for a standard residential drive, and most jobs take 5 to 10 working days from demo to final cure. The work itself is sequenced around one unbreakable fact: concrete has to cure, so the schedule is set by the pour, not by how many people we can put on it. For an exact number on your slope, your width, and your drainage, call (866) 320-2646 and we’ll walk the property with you.
How Groundwork Runs a Concrete Job in San Rafael, Start to Finish
Concrete work on a San Rafael lot is mostly preparation. The visible pour is one day. Everything before it decides whether the slab is still flat and crack-free five winters from now.
Stage 1: Site walk and layout (day 1). We measure the existing drive, check the slope from the street to the garage apron, and look at where water currently goes when it rains. On hillside lots above downtown and Dominican, this is where we find the old retaining wall or the failed French drain that has to be dealt with before anything else. You decide the driveway width and whether we’re matching or replacing the existing apron.
Stage 2: Demolition and haul-off (days 1 – 2). Old concrete breaks out and leaves in a dumpster on-site. If the existing slab sits over tree roots or a buried utility, we find it here. A demolition permit is not usually required for a like-for-like residential driveway, but the dumpster placement and street access need planning on narrow San Rafael streets where a truck can’t sit for long.
Stage 3: Grading, base, and drainage (days 2 – 4). This is the stage people skip and regret. We excavate to depth, compact a crushed aggregate base, and set the slope so water runs to the street or a drain rather than toward the garage. You decide here whether you want a trench drain, a channel along the low edge, or a simple slope-only approach. On steep lots we may need a retaining or crib wall detail; that gets priced and engineered before the pour, not after.
Stage 4: Forms, rebar, and inspection (day 4 – 5). Forms set the shape. Rebar or mesh goes in at the spacing your slab needs, and we call for any inspection before concrete goes down. This is your final chance to decide on finish, joint layout, and whether you want a widened apron or a turnaround area.
Stage 5: Pour, finish, and cure (day 5, plus 5 – 7 days). The pour itself is a single day. Finishing sets the surface texture and cut joints control where cracks land. Then it cures. You’ll keep vehicles off it for roughly 5 to 7 days, and full strength takes about 28 days. We walk the finished slab with you before we call it done, and it’s covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Actually Choose Between
- Standard broom-finish concrete: the most common choice for San Rafael driveways and the baseline cost. Textured enough for wet-weather traction, easy to maintain, and it takes a repair cleanly later.
- Exposed aggregate: a rougher, pebbled surface that grips better on sloped drives. Costs more per square foot and is harder to patch invisibly if it ever chips.
- Stamped concrete: pressed to mimic pavers or stone. Adds cost and needs resealing every few years, but it’s a real option if you want a decorative look without paver maintenance. We treat decorative stamped work as its own scope with its own pricing.
- Thickness and reinforcement: a standard residential drive is typically 4 inches with reinforcement; a drive that takes a heavy truck or sits on softer fill may go to 5 or 6 inches with a heavier rebar grid. Thicker slab costs more material and more base prep.
- Joint layout and control cuts: cuts placed on a real plan keep cracking predictable instead of random. Cheap jobs skip this; it’s the single biggest reason slabs look bad after two seasons.
- Drainage extras: trench drains, channel drains, and apron transitions. On San Rafael’s sloped lots these are frequently necessary, not decorative.
What Concrete Driveways & Concrete Work Costs in San Rafael, CA
Residential concrete driveway installation in San Rafael falls in the $4,500 – $12,000 range. A full driveway replacement typically lands between $5,000 and $14,000 once demolition and haul-off are counted. Expect the low end of those ranges for a short, flat, narrow drive with straightforward access, and the high end for wide drives, steep grades, or drainage and retaining work.
What pushes a job toward the top of the range:
- Size and width: square footage is the base multiplier. A two-car drive costs meaningfully more than a single-width one.
- Slope and drainage: hillside lots need grading, base work, and often a drain or wall detail that flat-lot jobs never touch.
- Existing condition: old slab thickness, buried debris, or failing subbase adds excavation time.
- Access: narrow streets and tight driveways mean smaller equipment and slower haul-off, which adds labor.
- Material and finish grade: broom finish is the baseline; exposed aggregate or stamped work adds a real premium.
- Permit scope: anything beyond a like-for-like replacement, especially retaining structures, means review and additional documentation.
A written estimate from us is line-item: demolition, haul-off, base, rebar, forms, pour, finish, and any drainage. Upfront pricing is our standard; the number you see is the number you pay, and change orders only happen if you change the scope. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the seat of Marin County, and the permitting reality here reflects that. The older settled neighborhoods – the West End, Gerard, Dominican, and the downtown grid – were built under layered city review, and projects in certain zones see added scrutiny that makes documentation slower than in a neighboring inland town. That matters for concrete work when your project touches a retaining wall, a slope, or drainage, because those items often pull in engineering review before the city will sign off. We pull the permits, walk the inspections, and keep the paperwork in our court.
The housing stock shapes the work too. West End and downtown bungalows and craftsman homes sit on lots where the drive is narrow and the garage apron is tight. In the hillside neighborhoods above downtown and Dominican, homes are built into steep lots behind older retaining walls and cribbing, and we routinely find drainage and slope issues that flat-lot jobs never run into. San Rafael’s warm central Marin microclimate means less coastal fog than points west, but winter rain still concentrates runoff down those hills, so getting water off the drive is the part that determines whether the concrete lasts. The Canal district’s older housing and the Terra Linda tract homes bring their own access and condition quirks. If your project grows into a bigger scope, it’s often part of a full Driveway & Pavers in San Rafael plan, and homeowners frequently pair it with a Garage Conversion ADU in San Rafael or a New Detached ADU in San Rafael where the new drive has to serve a new structure.
We work across all four San Rafael ZIP codes – 94901, 94903, 94913, and 94915 – and the surrounding communities of San Anselmo, Larkspur, Corte Madera, and Mill Valley. You can see the full scope of our Driveway & Pavers work or read more about how we cover San Rafael.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in San Rafael
Most concrete driveway jobs in San Rafael take 5 to 10 working days from demolition to final cure, with the pour itself on a single day. The base prep and cure time set the schedule, not the crew size. Call (866) 320-2646 for a realistic timeline on your lot.
A like-for-like driveway replacement usually does not require a permit, but anything involving retaining walls, slope work, or drainage that alters the grade often does, and the city of San Rafael’s layered review adds time to those projects. We handle the permit pull and inspections. Call (866) 320-2646 and we’ll tell you what your specific job needs.
In most cases yes. A driveway replaces a slab and does not touch plumbing or framing unless we uncover a buried utility or a failing retaining structure during excavation. When that happens we stop, price it, and get your approval before proceeding. Estimates are free, so call (866) 320-2646 to walk your property first.
Expect $4,500 – $12,000 for a new concrete driveway and $5,000 – $14,000 for a full replacement, with slope, drainage, and access driving the number up or down. Call (866) 320-2646 for an exact line-item quote – estimates are free.
Every concrete job we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (866) 320-2646 to go over the details before you commit.
Get a Free Concrete Estimate in San Rafael
If your San Rafael driveway is cracking, settling, or just overdue, the next step is a walk of the property and a written line-item estimate. Call (866) 320-2646 and a live person answers, day or night. We’ll ask about the slope, access, and what you want the drive to do, then set a time to measure it in person. The estimate and design consult are free, and there’s no pressure to book on the spot.
Written by the team at Groundwork Construction Co.