Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in San Anselmo, CA: What It Costs and What’s Involved
An aluminum fence in San Anselmo typically runs $4,000 – $10,000 installed, with most residential jobs landing near the middle of that range. The work is usually a two-to-three-day install once panels and posts are on site, though ordering and permitting add one to three weeks of lead time before anyone digs. Call (866) 320-2646 and we’ll price your specific run of fence, gate locations and all, with a written estimate that doesn’t move after the fact.
How an Aluminum Fence Goes In, Step by Step
Aluminum doesn’t go in the ground the way wood or vinyl does, and the sequence matters. Here’s the real order of events, and where you make decisions.
Stage 1: On-site measure and layout (day 1, about an hour)
We walk the property line, confirm where the fence actually goes, and mark post locations. On San Anselmo’s tight downtown lots, this is where we sort out shared property lines, creek-side setbacks and where a gate can swing without hitting a stair or a parked car. You decide gate placement and swing direction here, because moving a gate later means resetting posts.
Stage 2: Permit and utility check (one to three weeks)
Most San Anselmo fence work under six feet doesn’t need a building permit, but anything taller, any work in a floodplain or creek-adjacent zone, and any fence serving as a pool barrier does. We pull what’s required and call for utility locates before digging. You’ll need to confirm your property line if it isn’t marked; on hillside lots toward Sleepy Hollow, a survey is sometimes the only way to settle it.
Stage 3: Digging and setting posts (day 1 of install, four to six hours)
Aluminum posts get set in concrete footings, typically 24 to 36 inches deep depending on soil and fence height. On the flats east of Sir Francis Drake Boulevard, high water tables show up more often than people expect, and a footing that keeps filling with groundwater needs a different approach. Our technicians have up to 12 years of experience with exactly this kind of ground.
Stage 4: Panel and gate install (day 2, four to six hours)
Rails and pickets go up once the footings have set, followed by gates and hardware. You’ll want to decide on locks and self-closing hardware before this day, since gate hardware is a separate line item and a code-required piece if the fence surrounds a pool.
Stage 5: Walkthrough and touch-up (a half hour)
We check gate alignment, tighten hardware, touch up any powder-coat scratches and hand over the workmanship warranty. Aluminum doesn’t need staining or annual sealing, so that’s the end of it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Aluminum fencing is not one product. Here’s what actually changes between a $4,000 run and a $10,000 one.
- Residential vs. commercial grade. Residential aluminum uses thinner pickets and rails. Commercial grade is heavier, holds up to dogs leaning on it and costs roughly 25 to 40 percent more. Most San Anselmo homeowners are fine with residential unless a big dog or heavy foot traffic is involved.
- Picket style and spacing. Three-rail, two-rail and “no-climb” configurations all price differently. Tighter picket spacing costs more per foot but matters if the fence is keeping small pets in or children out.
- Finish. Powder-coated black is the standard and the most durable. Bronze and bronze-veined finishes cost more and can chip on impact. Cheap painted aluminum from a big-box store will flake within a few Marin winters.
- Gate type. A standard walk gate is the least expensive. Double drive gates, self-closing pool gates and gates with keypad latches all add cost and hardware.
- Height. Four-foot is the most common residential height. Five-foot and six-foot runs cost more per foot and are more likely to trigger a permit.
What Aluminum Fence Costs in San Anselmo, CA
Here’s the honest breakdown for a typical San Anselmo residential install, and what moves the number.
- Standard 4-foot residential aluminum, 100 linear feet: $4,000 – $6,500
- 5- to 6-foot height with commercial-grade pickets: $6,500 – $10,000
- Walk gate with hardware: $400 – $900 per gate
- Drive gate or double gate: $900 – $2,200
- Hillside post and footing work (steeper lots): adds 15 – 30 percent
- Permit and utility locate: $150 – $600 depending on scope
The variables that push a job toward the high end: linear footage, hillside terrain requiring deeper or braced footings, a pool barrier that needs self-closing hardware, and commercial-grade material. Toward the low end: flat ground, a simple straight run, standard four-foot height and no gates. Our written estimates list every line item, and the number you see is the number you pay. No change orders for work we should have quoted the first time.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo Homes Do to This Job
San Anselmo’s terrain changes fence work more than most people realize. The downtown corridor along Sir Francis Drake Boulevard sits on a flood-prone alluvial flat, and lots east of the boulevard frequently hit high water tables when you dig. Post footings that would set in a day on dry ground can need a different pour or extra cure time near the creek. Because San Anselmo Creek runs under and beside downtown, any fence work in the floodplain or near the creek triggers county floodplain and creek-permitting review before we can dig, and that review adds time most contractors don’t plan for. Hillside lots climbing toward Sleepy Hollow and the Ross border present the opposite problem: sloped ground, pier-and-post foundations and post spacing that has to step with the grade. We also see the early-1900s to 1950s Craftsman and bungalow stock on the flats, where fence lines often follow old property markers and a survey is sometimes the fastest way to settle a boundary question. When we cover San Anselmo, we plan for all of it up front so the install day isn’t a surprise.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in San Anselmo
The install itself is usually two to three days, but the full timeline from signed estimate to finished fence is typically three to four weeks once you factor in lead time and any permitting. Call (866) 320-2646 for a more precise timeline once we’ve seen the property.
Fences under six feet usually don’t need a building permit, but taller fences, pool barriers and any work in the creek-adjacent floodplain generally do. We pull what your specific property requires, and we’ll tell you before you sign anything whether a permit is likely.
Yes, in most cases. We call for utility locates before digging, and post footings are small enough that they rarely disturb landscaping or irrigation. If a sprinkler line or buried conduit is in the way, we route around it or adjust post spacing.
Most San Anselmo jobs land between $4,000 and $10,000 depending on linear footage, height, gate count and grade. A flat 100-foot run with no gates sits near $4,000 – $6,500; hillside work with a pool gate pushes toward the top of the range. Call (866) 320-2646 for an exact quote, and estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise: if something installed isn’t right, we make it right. The aluminum itself carries a manufacturer finish warranty, which varies by product. This is often paired with Driveway Repair & Replacement in San Anselmo or Patios, Walkways & Pool Decks in San Anselmo when a homeowner is reworking an entire yard at once.
Ready for a Real Number on Your Aluminum Fence?
Call (866) 320-2646 and we’ll set up a free on-site estimate for your aluminum fence in San Anselmo. You’ll get a written, line-item quote with no surprises, plus 0% financing for 18 months and $1,000 off projects over $10,000 if your yard work grows into something larger, like a full Fence Installation in San Anselmo or our wider Fence Installation service. Calls are answered by a live person around the clock. Estimates are free.
Written by the team at Groundwork Construction Co.