Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in San Anselmo, CA: What to Expect on Cost and Timeline
An iron fence for a typical San Anselmo lot runs $3,500 to $9,000 installed, and most residential jobs take two to four working days once the permit clears. Iron is the frontier answer for narrow lots, alley-load access and street-facing frontages where you want security and clear sightlines rather than a solid privacy wall. Call (866) 320-2646 to schedule a free on-site estimate.
How Our Iron Fence Process Works, Stage by Stage
We handle this as a systems job, not a “build a fence” job. Here’s the actual sequence we run on an Iron Fence project in San Anselmo, and what you decide at each point.
- 1
Stage 1: Site walk and layout (day 1, 1 – 2 hours). We measure the run, mark the property line against your plat, and check grades and access. On the flats east of Sir Francis Drake, you decide here whether the fence is a boundary line or a set-back screen, and we flag any stretch that needs a site-specific footing detail. You approve the layout on paper before we move a shovel.
- 2
Stage 2: Permitting and decisions (typically 1 – 3 weeks, mostly waiting). You pick panel style, height, finish and gate layout. We pull the fence permit and attach the site plan. San Anselmo permits go through the town’s building department, and any run near the creek gets extra review, so this stage is where a tight timeline lives or dies. You sign off on the final drawing and pay the permit fee.
- 3
Stage 3: Demo, marking and staking (day 2, half a day). We take out any existing fence, clear roots and debris, and call in the utility locate before we touch a post hole. You confirm gate locations and swing direction in the ground, not just on paper. This is the last low-cost chance to move a panel.
- 4
Stage 4: Posts and panels (days 3 – 4, the bulk of the work). We set posts, check plumb and line, and hang panels and gates. On tight San Anselmo lots, that means planning the crane-free carry path and where the material stack lands before we start, because a truck parked wrong on a narrow street stalls the whole day.
- 5
Stage 5: Punch, touch-up and walkthrough (same day as finish). We touch up welds and fasteners, check gate hardware and latch preload, and walk the run with you. Any defect we find or you flag gets fixed on the spot. Final payment is due after that walkthrough, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Two systems dominate what we install in this area, and the honest trade-off mostly comes down to rust, weight and budget.
- Wrought-iron style (mild steel, painted): the classic San Anselmo look for street-facing frontages. Heavier and more repairable than aluminum, and it takes paint well. It will rust at chips and welds over time, so budget for a touch-up coat every few years.
- Aluminum ornamental: lighter, powder-coated and rust-resistant, which matters in wet Marin winters. It’s the lower-maintenance pick and often the cheaper one. The trade-off is weight; it dents rather than bends, and repair is more a replacement than a weld. For real panels, an A-grade aluminum system from Sterling holds up well and keeps its finish longer than budget imports.
- Finish and color: black remains the default, but bronze and forest green are common asks on Craftsman homes. Powder coat beats field paint on durability.
- Height and picket spacing: 4 ft is the common residential choice; 5 to 6 ft is a security decision. Tight picket spacing costs more per foot but matters if the goal is keeping something out.
- Gates and hardware: a pedestrian gate is often the add-on that makes or breaks the project. Decide swing, latch and self-closing early, because hardware lead time is real.
What Iron Fence Costs in San Anselmo, CA
Most residential Iron Fence work lands between $3,500 and $9,000, all-in with permit and installation. Here’s what moves the number within that range.
| Line item | Typical range |
|---|---|
| Basic aluminum ornamental, 4 ft, residential run | $3,500 – $6,000 |
| Wrought-iron style, 5 ft, street frontage | $5,500 – $9,000 |
| Pedestrian gate, installed | $600 – $1,500 |
| Fence permit and site plan | $150 – $500 |
| Site-specific footing in tight or creek-adjacent ground | $250 – $900 |
The four variables that push a job to the high end: linear feet (the biggest lever), grade and access on a sloped lot, material grade (import versus an established line like Sterling), and permit scope if the run abuts the creek or a shared boundary. A written estimate lists panels, posts, hardware, gate, permit and disposal separately. What’s typically not included: survey work if the property line is disputed, and mature tree removal that roots run into.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo Homes Specifically Do to This Job
San Anselmo is built into the San Anselmo Creek watershed at the foot of Mount Tamalpais, and the core of town sits on a flood-prone alluvial flat. That shapes fence work here in ways it doesn’t in San Rafael or Larkspur. The downtown corridor along Sir Francis Drake Boulevard has flooded repeatedly, most notably in the 1982 and 2005 storms, so any run near the creek is subject to county floodplain and creek-setback review before a single post goes in. The housing stock is early-1900s to 1950s Craftsman and bungalows in the flats, with steeper hillside homes climbing toward Sleepy Hollow and the Ross border. That means tight clearances, narrow side yards and pier-and-post ground where a post-hole auger hits rock and roots rather than soil. We regularly see two failure modes: rusted panels and gate sag on older fences, and fences set too close to a creek bank that are already leaning. Homes in 94960 near the flats are the ones that most often need a site-specific footing rather than a stock one. If your fence project is part of a full Fence Installation in San Anselmo plan, we scope it together; see the wider Fence Installation work we do. We cover San Anselmo in full, and homeowners often pair this with Patios, Walkways & Pool Decks in San Anselmo when the frontage is being redone, or with ADU Design & Permitting in San Anselmo when a new structure needs a fenced entry. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in San Anselmo
Plan on two to four working days of installation, plus one to three weeks for the permit to clear. The install itself is the short part; permit review on any creek-adjacent or shared-boundary run is where the calendar gets eaten. Call (866) 320-2646 for a schedule estimate based on your lot.
Usually yes, and near the creek almost always, because you’re inside the floodplain where the county gets a say. Height limits also apply. We pull the permit and attach the site plan, so you’re not the one chasing it. Call (866) 320-2646 and we’ll tell you what your specific run needs.
In the vast majority of cases, yes. We call the utility locate before we dig and design around roots and existing structures. Only an in-ground post conflicts with a known line, and we set the plan around it. Call (866) 320-2646 to book the site walk.
Most jobs run $3,500 to $9,000 installed, with linear feet as the biggest driver. Grade, material grade and permit scope move it. Call (866) 320-2646 for an exact quote – estimates are free.
Every project carries our 730-Day Done Right Promise: if it’s not right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. The number you see on the estimate is the number you pay, with no change orders after the fact. Call (866) 320-2646 to talk it through.
Get Your Free Iron Fence Estimate
Tell us the run, the look you want and where the gates go, and we’ll walk the property, check the creek and grade issues, and hand you a line-item written estimate. No-pressure, fixed pricing. One call gets it started: (866) 320-2646, answered by a live person around the clock. We’ll confirm a site visit and have your number in hand.
Written by the team at Groundwork Construction Co.