Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Novato: What to Expect
Custom & geometric windows in Novato typically run $6,000 to $22,000 for a typical residential project, with most jobs wrapped in two to four weeks from template to final inspection. The number depends on how many units you’re doing, the shapes involved (arches, trapezoids, circles, angled gables), and the frame material. Call (866) 320-2646 for a free on-site estimate, and we’ll put a written, line-item number in front of you before any deposit changes hands.
How We Run a Custom & Geometric Job, Start to Finish
Custom and geometric windows aren’t a swap. You’re cutting new openings or reframing existing ones, matching angles to a roof pitch or a stair run, and building assemblies that have to shed wind-driven rain for decades. Here’s the real sequence, with the same timeline we’d give you if you called today.
Stage 1: On-Site Template and Scope (Day 1, about 2 hours)
We measure every rough opening, photograph the existing wall assembly, and check whether the framing behind the stucco or siding is straight and plumb. On Novato’s Hamilton-era duplexes, we frequently find framing that’s out of square by half an inch or more, which changes the window spec. You decide the priority: best fit and finish, or best value per unit. Most homeowners land on a mix.
Stage 2: Shop Drawings and Sign-Off (Days 2 – 7)
Arched and trapezoidal units need shop drawings before anything gets ordered, because the manufacturer builds to the drawing, not to the tape measure. You review elevation drawings for each opening and approve frame color, glass package, and grille pattern. This is the stage where homeowners change their minds most often, and it’s the cheapest stage to do it. Once drawings are signed, lead time is committed.
Stage 3: Fabrication (Weeks 2 – 4, typically)
Custom geometry takes longer than stock. Circles, half-rounds, and angled units often run three to five weeks, occasionally six if the glass is a specialty low-E or laminated assembly. We give you a firm delivery date in writing and don’t start demo until the units are on hand.
Stage 4: Demo, Framing and Installation (2 – 4 days per opening cluster)
Walls come open, existing frames come out, and any rot or soft sheathing gets replaced before the new window goes in. This is the day the job can grow: on older Novato homes we regularly find compromised sheathing behind window trim, and that gets fixed before we close the wall. Flashing, sill pans, and air sealing go in before trim. Each unit is set, shimmed, and checked for square.
Stage 5: Trim, Finish and Final Walkthrough (Days 4 – 5 per cluster)
Interior casing, exterior trim, caulk, and paint-ready surfaces are finished before we call the job done. We walk every opening with you, check operation, and leave the paperwork you need: manufacturer warranty registration, our own written workmanship commitment, and the inspection sign-off where it applies. Our technicians have up to 12 years of experience on this kind of work, and it shows up at this stage.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Frame material: vinyl vs. fiberglass vs. wood-clad. Vinyl is the value option and holds up well inland; it can be limited on large arched units because it doesn’t bend the way wood or fiberglass does. Fiberglass handles geometry better and resists heat, at a higher cost per unit. Wood-clad aluminum (Marvin, Andersen) is the top choice for historic and custom homes where the finish has to read as traditional.
- Glass package. Standard dual-pane low-E is fine for most openings. On the windward walls facing the Petaluma Gap, laminated or triple-pane glazing earns its cost with quieter interiors and better wind resistance.
- Geometry and grille patterns. A simple half-round transom costs far less than a true eyebrow arch over a curved opening. Simpler geometry with a strong grille pattern often reads better than the complex shape and costs less to build.
- Operating vs. fixed. Fixed units cost less, seal better, and are the right call for most transoms and circles. Operable units where you actually want airflow.
- Finish and hardware. Factory-applied finish holds up longer than field-painted trim. Exterior hardware in coastal-grade stainless costs more and lasts substantially longer.
What Custom & Geometric Windows Costs in Novato, CA
For reference, standard window replacement in Novato runs $4,500 to $15,000, and impact-rated installation $8,000 to $25,000. Custom and geometric units sit above the stock range because every opening is a one-off build. Typical custom geometry pricing in Novato:
- Single custom-shaped unit (arch, circle, trapezoid, installed): $1,800 – $5,500
- Cluster of 3 – 5 geometric units, one wall or gable: $6,000 – $14,000
- Full custom run across a home’s front elevation: $14,000 – $22,000+
- Framing changes, structural header work, or wall relocation: add $1,500 – $6,000
- Permit fees and inspection: varies by scope, disclosed in your written estimate
What pushes a job to the high end: complex geometry requiring engineered shop drawings, wood-clad or fiberglass frames, operating units in unusual shapes, and any wall opening that’s new construction rather than replacement. What keeps it low: fixed units, simpler shapes, vinyl frames, and reusing existing openings. A written estimate from us includes materials, labor, framing allowance, flashing and sealing, trim, debris haul-off, and permit coordination where required. It does not include finish painting or any rot found behind the wall beyond the written allowance, and we call that out before you sign.
See the difference
Before
After
Before
After
Before
AfterWhat Novato Homes Specifically Do to This Job
Novato sits right at the Marin/Sonoma line, and that matters more for window work than most people expect. Down the 101 corridor toward Ignacio and Hamilton, marine air drives corrosion detailing on hardware, flashing, and fasteners. Up toward the hills above downtown and the wildland-urban interface edges near Petaluma Hill, wildfire-hardened assemblies come into play. We’re regularly building the same elevation with coastal-grade fasteners on one side and noncombustible detailing on the other.
Hamilton Field’s converted military stock is the other factor. Those 1940s-50s duplexes were built before modern shear and fire hardening, so a “simple” window project there often uncovers framing that needs attention before the new unit goes in. In the 1960s-70s tract ranches in San Marin and Ignacio, the original aluminum frames have held up poorly, and the openings are typically standard enough to keep geometry simpler. Permitting runs through the City of Novato, and any change to opening size or wall structure triggers a plan review. On homes with a recorded wildfire hazard designation, window assembly spec may need to meet specific requirements, and we confirm that before ordering. We cover Novato and the surrounding area; if you’re near the edges of town, check the Novato service-area page for coverage details. Homeowners often pair this with Concrete Driveways & Concrete Work in Novato when a front elevation refresh is underway, or with Asphalt Driveways & Resurfacing in Novato when the exterior work runs long.
Serving Novato, CA – Our Local Coverage Area
We serve Novato and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Novato
Most jobs run two to four weeks from signed drawings to final walkthrough, with fabrication accounting for the largest chunk. Simple clusters can go faster; complex geometry with specialty glass can run five to six weeks. Call (866) 320-2646 for a timeline specific to your openings.
Yes, if the opening size changes or any structural framing is modified, the City of Novato requires a permit and inspection. Straight replacement in the same opening typically does not, but the specifics depend on your scope. We confirm permit requirements before any work begins, and estimates are free.
Usually yes, but it depends on the wall. If the new unit fits the existing opening, no structural change is needed. New openings, or any change in size, may require a header or framing adjustment, and we spell that out in the estimate rather than discovering it mid-job. Call (866) 320-2646 to walk through your layout.
Most projects land between $6,000 and $22,000, with single geometric units around $1,800 to $5,500 installed. Frame material, geometry complexity, and whether new framing is involved are the biggest drivers. Call (866) 320-2646 for an exact quote; estimates are free and itemized.
Every project we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. Manufacturer warranties on the units themselves are registered in your name at completion. Call (866) 320-2646 with any warranty question, big or small.
Not on our side. We give upfront pricing and the number you see is the number you pay. The only variable is rot or framing hidden behind the wall, and we have an allowance for that in the written estimate, so you know the ceiling before work begins. Call (866) 320-2646 to schedule a free estimate.
Get a Free Custom & Geometric Windows Estimate in Novato
If you’re weighing custom & geometric windows for a Novato home, the fastest way forward is a free on-site estimate. When you call (866) 320-2646, a live person answers, day or night, and we’ll set a time to walk your openings, talk through shapes and materials, and put a written line-item price in your hands. No pressure, no vague numbers. We’ll also talk through brands like Sterling and GAF where they fit your job, and whether a broader Windows & Doors plan makes more sense for your home. For a whole-home view, our Windows & Doors in Novato page covers the full scope, and every project is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.