A Groundwork company - serving San Francisco, CA
Groundwork Construction Co. of San Francisco construction team

New Window Installation Cost in San Francisco - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does New Window Installation Cost in San Francisco?

New window installation in San Francisco typically costs $5,310 – $17,700 for a full replacement project, with most single-family homes landing near $11,200 for a mid-grade whole-house job. Single-window replacements run $520 – $1,450 installed, while impact-rated units for homes near the coast climb to $9,440 – $29,500. The biggest cost swing isn’t the glass itself: it’s the age of your building, whether you’re in a pre-1940 Victorian or a 1990s Mission District infill, and whether the facade falls under historic review.

Key Takeaways

  • Typical San Francisco window replacement runs $5,310 – $17,700, with single units at $520 – $1,450.
  • Historic and pre-1940 buildings add labor time for structural reframing and permit review.
  • Impact-rated windows cost $9,440 – $29,500 here because of wind-driven rain and coastal salt exposure.
  • 0% financing for 18 months and $1,000 off projects over $10,000 are standing offers, not limited promotions.
  • Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise.

New Window Installation Cost Breakdown (2026)

Here’s a line-item view of what homeowners actually pay for new window installation in San Francisco. These are installed prices, meaning the window, labor, disposal of the old unit, and standard trim are included. They don’t include structural reframing, which we quote separately after a walkthrough.

Item Typical Cost Range
Single window, standard vinyl, installed $520 – $1,450
Single window, wood-clad or fiberglass, installed $1,180 – $2,950
Whole-home window replacement (10 – 15 units) $5,310 – $17,700
Impact-rated window installation $9,440 – $29,500
Bay window installation (per unit) $3,240 – $7,850
Window trim and casing replacement $340 – $1,180 per window
Structural reframing for non-standard openings $620 – $2,360 per opening
Historic facade compliance and permit review $470 – $2,125

What pushes a project toward the top of these ranges? Old openings that aren’t square. San Francisco has thousands of homes built before 1940 where wall framing has shifted, settled, or been patched repeatedly. When we pull a window and find rot or a bowed header, the reframing line gets real. On the other hand, a straightforward swap in a 1980s building with standard rough openings stays near the low end. Bay windows sit higher because they’re three-face units with a projection that has to be flashed and sealed carefully. For a broader look at how window and door work fits into a larger renovation budget, our home page lays out our full service scope.

What Affects New Window Installation Pricing in San Francisco

Pricing here doesn’t work like pricing in Sacramento or San Jose. The housing stock, coastal weather, and city permitting make window work in San Francisco its own thing. These are the factors that move the number most.

  • Building age and wall construction. A pre-1940 Victorian or Edwardian often has lath-and-plaster walls and non-standard rough openings. We frequently find a window that was resized decades ago, which means we’re reframing before we install. Expect a $620 – $2,360 bump per opening on those jobs.
  • Historic and facade review. Homes in the Northeast San Francisco Historic District, the Liberty Hill district, and near Alamo Square can fall under planning review for exterior changes. That adds time and a permit step. We handle the paperwork, but it’s real cost and it’s baked into our quote, not surprised onto it later.
  • Coastal wind and salt exposure. Fog and driving rain off the Pacific beat up windows in the Sunset, the Richmond, and along the Outer Sunset. That’s exactly why impact-rated glazing runs $9,440 – $29,500 here. Salt air corrodes cheap hardware fast, so we spec hardware that holds up rather than the cheapest hinge on the shelf.
  • Material choice. Vinyl is the budget anchor. Fiberglass and wood-clad units roughly double the per-window cost but hold up better against marine air. We work with Andersen and Marvin for homeowners who want a premium unit, and we’ll walk you through the tradeoffs honestly rather than upselling you into glass you don’t need.
  • Access and staging. A Russian Hill home on a steep lot with no driveway means staging on the street, sometimes with traffic control. Multi-story exteriors need ladders or a lift. Narrow lots off Lombard or in Telegraph Hill add handling time to every unit.
  • Seismic and code considerations. San Francisco requires anchoring upgrades in some cases, and any window work that touches the building envelope may trigger a Title 24 energy compliance check. Title 24 in Climate Zone 3 pushes toward higher-performance glazing, which is a cost and a benefit.

You’ll see the same pattern with any exterior envelope work. Roofing in this city carries similar coastal and seismic add-ons, which is why our San Francisco service area page groups the trades that share these conditions.

How to Save on New Window Installation

There’s real money to save here if you plan the work rather than replace one window at a time as each fails. Here’s what actually moves the number down in San Francisco.

  • Bundle the whole facade. Replacing ten windows in one mobilization costs meaningfully less per unit than ten separate service calls. Staging, permitting, and disposal are shared across the job. A whole-home project lands in the $5,310 – $17,700 band for that reason.
  • Pick vinyl where it’s hidden, premium where it shows. Street-facing windows get the fiberglass or wood-clad unit that neighbors and buyers see. Rear and side windows on a Victorian can use vinyl without anyone noticing, and the savings are real.
  • Use the standing offers. $1,000 off projects over $10,000 applies to most whole-home jobs. 0% financing for 18 months spreads the rest without interest if you pay it down on schedule. Neither one expires or requires a code.
  • Get a free design consult first. A free project estimate and design consult means you see the actual number before you commit, with no-hassle upfront pricing. The number you see is the number you pay.
  • Address failed seal units early. A fogged double-pane unit is a cheap fix now and a rotten frame later. Catching it before the wood behind the glass goes soft keeps you out of the reframing line item entirely.

Few trades reward planning as well as windows. The same is true for roofing, where catching a small leak early avoids a full replacement. If you’re already thinking about the envelope, our roof replacement guide for San Francisco covers how those costs line up.

Repair or Replace: Which Makes Sense in San Francisco?

Repair usually wins if the frame is sound and only the glass or hardware has failed. Replace when the frame is soft, when several units have failed at once, or when you’re chasing energy performance in an older building. A single failed seal unit might cost a few hundred dollars to swap. Replacing the whole window runs $520 – $1,450 installed for vinyl, which is often the smarter buy if the frame is already showing its age. If you’re facing a home where the windows, the roof, and the doors are all at end of life, it’s worth looking at how those projects stack. Our window replacement page for San Francisco walks through when a full replacement beats a repair, and our roof repair guide covers the same logic on the roof.

Which Windows Hold Up Best Against San Francisco Weather?

Fiberglass and wood-clad units hold up best along the coast, while vinyl is fine inland and on rear facades. The deciding factor isn’t brand; it’s exposure. Homes in the Outer Sunset and the Richmond face salt air and wind-driven rain that eat cheap hardware and stress the seals. In those conditions, we lean toward fiberglass frames and marine-grade hardware, and we spec Andersen or Marvin when the budget allows. Inland neighborhoods like Noe Valley and Bernal Heights see less salt and less wind, so vinyl performs well and saves money. Impact glazing only makes sense when the exposure or the noise justifies it, and we’ll tell you plainly when it doesn’t.

Door replacements follow the same logic. A failed patio door lets in the same weather as a failed window, and the decision matrix is nearly identical. Our door replacement guide for San Francisco covers it.

How Long Does New Window Installation Take in San Francisco?

Most single-window replacements finish in 2 to 4 hours, and a full-home job of 10 to 15 units typically takes 2 to 4 days. The variable is the building, not the window. A 1920s Edwardian with settled framing takes longer per opening than a 1990s building with clean rough openings. Permit review for historic facades can add days to the front end before anyone touches a window. When we schedule, we tell you the realistic window, not the optimistic one. Most jobs are completed in a single visit per phase, and our technicians are background-checked and arrive in uniform, so you know who’s on your property.

Windows and doors aren’t the only place a San Francisco homeowner runs into envelope and framing decisions. If your project grows into something larger, our home addition guide and ADU construction guide break down the costs of larger structural work. Bathroom and kitchen projects also carry window and door replacement inside them, and our bathroom remodeling guide and kitchen remodeling guide show where those pieces fit in the budget.

Frequently Asked Questions

How much does a single window installation cost in San Francisco?

A single window costs $520 – $1,450 installed for standard vinyl, and $1,180 – $2,950 for wood-clad or fiberglass. Bay windows run $3,240 – $7,850 per unit. Call (866) 320-2646 for an exact quote on your opening; estimates are free.

Is it cheaper to repair or replace a window in San Francisco?

Repair is cheaper when only the glass or hardware has failed, often a few hundred dollars. Replacement makes more sense once the frame is soft or several units fail together, at $520 – $1,450 per unit. A free estimate tells you which side you’re on. Call (866) 320-2646 to schedule one.

Do I need a permit for window replacement in San Francisco?

Yes, most window replacements require a permit, and homes in a historic district may need facade review that adds $470 – $2,125 to the project. We handle the permit step for you and price it upfront. Call (866) 320-2646 to find out what your building needs.

How much does impact window installation cost in San Francisco?

Impact-rated window installation runs $9,440 – $29,500 for a full project, which reflects the coastal wind and salt exposure in neighborhoods like the Sunset and the Richmond. It’s not right for every home, and we’ll tell you when it isn’t. Call (866) 320-2646 for a straight answer.

Can you install new windows in a pre-1940 San Francisco home?

Yes, and it’s most of what we do here. Older Victorians and Edwardians often need reframing, which adds $620 – $2,360 per opening, but the work is routine for us. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise. Call (866) 320-2646 to book a walkthrough.

Why Homeowners Choose Groundwork Construction Co. of San Francisco

Window work is one of our seven core service lines, and it’s held to the same standard as everything else we do. Every project is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail loop waiting for Monday. We work with a curated set of brand partners, including Andersen and Marvin for windows, so you’re choosing quality rather than whatever’s available that week. Our technicians are background-checked, arrive in uniform, and our most senior hands carry up to 12 years of experience. Pricing is upfront, no surprises. And with 0% financing for 18 months and $1,000 off projects over $10,000, a whole-home window job is within reach without knocking your budget sideways.

The best next step is a free project estimate and design consult. We’ll walk the openings, measure, check for rot and framing issues, explain the permit picture for your building, and hand you a number you can plan around. From foundation to finish line, that’s how we work.

Call (866) 320-2646 today for a free estimate on new window installation in San Francisco. We’ll give you the real number, in writing, with no surprises.

Pricing reflects the San Francisco market as of 2026. Groundwork Construction Co. of San Francisco offers free estimates – call (866) 320-2646.

Written by the team at Groundwork Construction Co.

What Our Customers Say

★★★★★ 5.0 from 5+ reviews

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

- Marco Castillo

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan
Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646

Request a Free Estimate

Tell us what's going on in San Francisco. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch