Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in San Francisco: How to Decide Before You Spend
Choose refacing unless your cabinet boxes are out of square, water-damaged near the sink, or built from a mix of old remodels that won’t hold a veneer. In most San Francisco kitchens, the deciding factor isn’t the doors or the finish. It’s the box underneath. Refacing makes financial sense when those boxes are worth keeping. In a 1911 San Francisco kitchen, the boxes might be old-growth fir that outlasts anything on the market today, or they might be a patchwork of three different prior remodels held together by wood filler and wishful thinking. The only way to know is an honest assessment. Call (866) 320-2646 to schedule one.
Why San Francisco Cabinets Don’t Behave Like Suburban Cabinets
Most cabinet advice you’ll read online was written for 1990s tract homes with plywood boxes and consistent factory dimensions. San Francisco housing stock is a different animal. Kitchens built between the 1880s and 1920s in Victorian and Edwardian row houses were often site-built by finish carpenters, not delivered in boxes from a factory. That means no two kitchens are identical, and no two cabinet runs within the same kitchen are guaranteed to match either.
Add the local climate into the picture. Marine fog and salt air from the Pacific and Bay drive moisture into lower cabinets, particularly ones near the sink and dishwasher. West-side homes sitting in the fog belt see it worse. Corroded hinges, swollen toe kicks, and failed paint on door edges are common, even when the face frames look fine from across the room. A refacing job on top of soft, damp boxes is a waste of money that will show its seams within a few years.
That’s why an assessment comes first. Our technicians have up to 12 years of experience in kitchens across this city, and they know what to check before anyone quotes a reface. For the bigger picture on how cabinets fit into a full renovation, see our guide to Kitchen Remodeling in San Francisco.
The Four Checks That Decide Refacing vs. Replacement
Whether your cabinets can take a veneer comes down to four measurable conditions. The technician walks in with a level, a straight edge, and a moisture meter. Not a catalog.
- Box squareness. The cabinet frame needs to be within roughly 1/8 inch per 24 inches of true. Modern refacing veneers are manufactured to tight tolerances. Original San Francisco boxes, particularly ones nailed rather than glued, frequently drift out of square as the wood moves over decades.
- Drawer slide condition and replaceability. Old wood-on-wood slides can be replaced with modern ball-bearing slides. But the drawer box itself has to be sound. If the drawer bottoms are splitting or the joinery has failed, slides won’t fix it.
- Hinge bore pattern compatibility. European concealed hinges need a specific 35mm bore and matching door thickness. Original SF cabinet doors are often 3/4-inch or thicker with unusual bore placements. Refacing replaces the doors anyway, but the frame needs to accept the new hinge plates without filling and re-boring the whole run.
- Moisture damage near the sink and dishwasher. This is the check that flips the decision fastest. Soft toe kicks, delamination on the interior panels, and rusted fasteners around the sink cabinet usually mean the box has to go. Refacing a swollen cabinet is a short-term cosmetic fix with a long-term bill attached.
If you’re considering a larger change to the room, our Kitchen Remodeling page covers layouts, countertops, and islands in detail. Cabinet work is one piece of a bigger decision, and it helps to see them together.
The Honest Cost Comparison for San Francisco
Refacing a full San Francisco kitchen typically runs $4,500 to $10,000. Full replacement with KraftMaid semi-custom cabinetry runs $15,000 to $35,000 installed. That $10,000 to $25,000 gap is real. It also narrows faster than the sticker price suggests once old boxes need prep work: patching, re-squaring, hinge re-boring, and replacing failed drawer boxes can push refacing toward the top of its range.
For context on total kitchen budgets in the city, a full kitchen remodel runs $16,520 to $53,100, and cabinet installation alone runs $4,720 to $15,340. Countertop installation adds $2,360 to $7,670, and a backsplash runs $945 to $2,950 if you’re doing the whole scope.
| Option | Typical SF Cost | Best Fit |
|---|---|---|
| Refacing (veneer + new doors) | $4,500-$10,000 | Boxes square, dry, and sound |
| KraftMaid semi-custom replacement | $15,000-$35,000 | Boxes failing, layout changing, or long-term durability matters |
| Full kitchen remodel (as budget anchor) | $16,520-$53,100 | Kitchen layout, appliances, and finishes all changing |
Beyond cost, sheet goods matter. KraftMaid’s dovetail drawer box construction, full-access hinge system, and factory-applied finish hold up better in San Francisco’s damp kitchens than builder-grade replacements with MDF boxes. When replacement is warranted, it’s not a splurge. It’s an investment in something that won’t fail again after the fog rolls in.
Does the Permit Question Change the Math?
Sort of, and it’s worth factoring in honestly. Cabinet refacing in San Francisco, when it stays on the same footprint and doesn’t touch structure, needs no permit. Cabinet replacement that moves the layout, adds a new run, or touches a bearing wall does, and this city’s planning and discretionary review process can add time and cost that isn’t in the cabinet quote. If your replacement plan is a like-for-like swap in the same footprint, the permit piece is much smaller. If it’s a layout change, build the permit time and cost into your schedule before you compare the two paths. A contractor who guides you through this without pressure is the one worth hiring.
How Groundwork Handles the Ambiguous Middle
Most San Francisco kitchens don’t land cleanly on one side or the other. Some boxes are perfect, some are shot, and the room needs a mixed approach. Our process is straightforward: an assessment on the front end determines which boxes are refaceable and which should be replaced, and both options get priced transparently before you commit a dollar to demo. You see the numbers, you pick. No upsell on day one, no discovery fees that appear after the doors come off.
The work is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Every job is done by background-checked, uniformed technicians or vetted brand partners, and we answer the phone with a live person 24/7. No voicemail black holes. Right now we’re offering 0% financing for 18 months, $1,000 off projects over $10,000, and a free project estimate and design consult. Every proposal comes with upfront pricing: the number you see is the number you pay.
If you’re thinking about other parts of the home while you’re at it, we handle related work across the property. You can start from our home page to see the full scope, or read up on our approach to bathroom remodeling if the vanity and fixtures are next on the list.
FAQs
Cabinet refacing in San Francisco typically runs $4,500 to $10,000 for a full kitchen, assuming the existing boxes pass the squareness, moisture, and hinge checks. Anything above that range means either premium finishes or serious prep work on old cabinets. Call (866) 320-2646 for an exact quote on your kitchen. Estimates are free.
It’s worth it when the boxes are old-growth fir, dry, and roughly square, which describes more pre-1930 San Francisco kitchens than you’d expect. It’s not worth it when the boxes are water-damaged near the sink or built from multiple mismatched remodels. The refacing veneer will fail on a bad box within a few years. An honest assessment on the front end keeps you from throwing money at the wrong fix.
You need a permit when the replacement changes the layout, adds a new cabinet run, or touches a bearing wall. A straight swap in the same footprint generally doesn’t trigger one. Refacing never does. This matters because San Francisco permits can take months to clear, which is a real cost in the financial comparison. Call (866) 320-2646 and we’ll tell you which category your project falls into.
Yes, and it’s often the smartest move in a mixed-condition San Francisco kitchen. We replace the failed boxes (usually the sink base and any cabinet with soft toe kicks) and reface the sound ones. The room reads as a single new kitchen when it’s done, and you avoid paying to replace boxes that still have thirty years of life in them. Call for an assessment and we’ll show you exactly which ones fall into each group.
Get a No-Pressure Assessment
If you’d rather have it looked at in person than guess from a blog post, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco, and we’ll price both refacing and replacement so you can see the real numbers side by side. Call (866) 320-2646 for a free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.