Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence in San Francisco, CA
An aluminum fence in San Francisco typically runs $3,400 to $9,800 for a standard residential run, installed, with most single-yard jobs landing between $4,500 and $7,000 depending on height, style, and how much site work the hillside demands. Aluminum is the lightest, most rust-resistant option we install, and it holds up better than steel or wood against the fog, salt air, and constant moisture that come with living in this city. If you’re weighing materials, our Fence Installation in San Francisco page lays out how aluminum compares to wood, vinyl, and wrought iron side by side.
Groundwork Construction Co. of San Francisco installs aluminum fencing as part of our full-scope Fence Installation work, and we treat it the way we treat every trade we touch: upfront pricing, background-checked technicians in uniform, and the 730-Day Done Right Promise standing behind the finished fence. Our technicians have up to 12 years of experience, and every job is backed in writing. Call (866) 320-2646 and a live person picks up, day or night.
Key Takeaways
- Aluminum fencing in San Francisco usually costs $3,400 to $9,800 installed, with most jobs between $4,500 and $7,000.
- Powder-coated aluminum resists rust, salt fog, and termites better than wood or steel in this climate.
- Most residential aluminum fence installs finish in one to two days once permits and layout are set.
- We answer the phone 24/7 with a real person, and estimates are free.
- Every fence is covered by our 730-Day Done Right Promise.
When You Need Aluminum Fence
Homeowners call us about aluminum fencing in San Francisco for a handful of recurring reasons. Here’s what we hear most, and what usually triggers the call:
- The wood fence finally gave out on a foggy slope. In Sunset District and Richmond District yards, the marine layer keeps wood damp for months, and a 15-year-old redwood run starts to rot at the posts and rails before the pickets ever fail. Aluminum doesn’t absorb water, so it ends the cycle.
- You need a boundary that won’t rust near the water. Salt air eats steel and chips at thin coatings. Along the Marina, in Bernal Heights, and anywhere within a few blocks of the bay, powder-coated aluminum outlasts a comparable steel fence by a wide margin.
- You’re fencing a steep or terraced lot. Aluminum panels are light enough for one crew to rack and stair-step down a sloped yard on Telegraph Hill or in Noe Valley without heavy equipment tearing up the landscaping.
- You want the wrought-iron look without the maintenance. Many homeowners in Pacific Heights and Presidio Heights want a decorative, vertical-picket look to match the neighborhood’s traditional architecture, but they don’t want the rust and repainting that come with real iron.
- You’re adding a pool or need a code-compliant barrier. A pool safety fence or a property-line fence that has to meet local height and setback rules on a tight urban lot is a common reason to call. Aluminum gives you a clean, consistent barrier that passes inspection.
- A neighboring development or a landlord pushed the issue. When a new ADU goes in next door or a property changes hands, we get called to establish a clear, durable, low-maintenance boundary line, often on lots in the Excelsior and Outer Mission.
Our Aluminum Fence Process
Every aluminum fence we install follows the same disciplined sequence. It’s the same approach we bring from foundation to finish line on every project, scaled to a fence job.
- Free estimate and design consult. We walk the property line with you, measure the run, note slopes, gates, and any plantings or utilities in the way, and talk through style and height options. You get a written, upfront price before anything else happens. No surprises.
- Layout and property-line verification. On a San Francisco lot, knowing exactly where your line sits matters, especially in densely packed blocks like the Mission or Glen Park where lots sit close together. We confirm setbacks against the local rules and flag any permit the job needs before we order materials.
- Permit handling where required. Fences above a certain height, corner-lot sight-line fences, and pool barriers can require a permit or trigger neighborhood design review. We tell you what applies to your block and handle the paperwork.
- Site prep and post setting. We dig posts to depth, account for the slope with stepped or racked panels, and set them so they stay plumb and tight through wet winters. On clay-heavy hillside soil, that means getting the footing right the first time.
- Panel and gate installation. Panels, pickets, and gates go in square and level. We check every gate swing and latch, set the hardware, and make sure the finished run is straight before we leave.
- Final walkthrough. We walk the fence with you, point out gates and any maintenance notes, and hand over the job covered by our 730-Day Done Right Promise. If something isn’t right, we make it right.
Aluminum Fence Pricing in San Francisco
Here’s what aluminum fencing costs in San Francisco, broken out by the line items that actually drive the number. These are honest installed ranges, not a teaser price that grows once the crew arrives.
| Line item | Typical range |
|---|---|
| Standard 4-ft decorative aluminum fence | $35 – $55 per linear foot |
| Taller 5 – 6 ft privacy or security aluminum | $48 – $80 per linear foot |
| Gates (walk gate, installed) | $350 – $900 each |
| Driveway or double gate | $1,200 – $2,800 |
| Removal and haul-away of old fence | $400 – $1,200 |
| Steep or terraced lot site work | $500 – $1,800 |
| Permit fees (when required) | $150 – $600 |
A typical 60-foot run at 4 feet tall with one walk gate usually lands around $3,000 to $4,500. Larger properties, pool barriers, and complex gate configurations push the total toward the upper end. A handful of factors move the price more than anything else:
- Height and style. Decorative 4-foot fencing is the base price; 6-foot privacy or security panels cost more per foot and use heavier posts.
- Slope and access. San Francisco lots aren’t flat. Stair-stepping panels down a hill or racking them along a slope takes more labor, and tight side-yard access on an urban block slows the crew down.
- Gates. Every self-closing, self-latching gate adds hardware and machine time. Pool gates have stricter requirements.
- Old fence removal. Tearing out and hauling away a rotten wood fence is real work and real disposal cost.
- Coat finish and color. Standard powder-coat colors (black, bronze, white) cost less than custom color matching, which matters where HOA or neighborhood design rules apply.
We pair upfront pricing with 0% financing for 18 months and $1,000 off projects over $10,000, so a bigger property or a full boundary replacement is more accessible than you might expect. Every estimate is free, and the number you see is the number you pay.
Why Aluminum Is the Right Material for San Francisco Yards
San Francisco throws a specific set of conditions at a fence. Fog rolls in through the Avenues for weeks at a time. Salt air comes off the Pacific and the bay. The ground under many neighborhoods is clay that swells and shifts with the winter rains. Aluminum handles all of it better than most alternatives.
Powder-coated aluminum doesn’t rust. It doesn’t absorb water the way wood does, so it won’t rot, warp, or feed termites. It doesn’t need repainting every few years like iron or annual staining like cedar. For a homeowner in the Inner Sunset or out in the Parkside who’s tired of a maintenance cycle every few seasons, that’s the whole argument. Aluminum is also lighter than steel, which keeps installation cleaner and puts less stress on footings.
If your home’s exterior leans toward traditional craft, the same eye for materials we bring to other trades applies here. We work with a curated set of trusted brands across every category, the same way we’d reach for James Hardie siding or brand-name fixtures on a renovation. You get fencing that matches the quality of the rest of the property, not whatever size happened to be on the shelf. Built to last, backed in writing.
Aluminum Fencing for Pools, ADUs, and Neighborhood Rules
A lot of our aluminum fence work in San Francisco ties into bigger projects. When a homeowner adds an ADU in the backyard, the pool or spa they put in afterward usually needs a code-compliant safety barrier, and a self-latching, self-closing aluminum gate with the right height and picket spacing is the common solution. If you’re planning that kind of backyard change, our team can fold the fencing into the larger scope so you’re dealing with one contractor from foundation to finish line, not three.
Neighborhood rules matter here too. Corner lots in Noe Valley, the Castro, and elsewhere run into sight-line and height restrictions that limit how tall and open a fence can be near the intersection. Some blocks have design review or HOA guidelines on color and style. We’ll tell you what applies to your street before you commit to a design, not after the fence is in the ground.
Common Aluminum Fence Problems We Solve
When a homeowner calls about an aluminum fence that’s already up, it’s usually one of these:
- Sagging or misaligned gates. A gate that drags or won’t latch is almost always a hinge or post problem, not the panel. We diagnose and correct the root cause rather than papering over it.
- Loose posts from soil movement. Our clay and hillside soils shift, and a post set too shallow will work its way loose over a wet winter. We reset posts to proper depth.
- Chipped or faded powder coat. Coastal sun and salt can dull a cheap coating. We match and correct finishes, or replace panels where the coating has failed.
- Fence leaning on a sloped yard. Panels that weren’t properly stepped or racked look crooked from day one. We re-set the run to follow the grade cleanly.
- A fence that never met code. Pool barriers, corner-lot runs, and height violations from a prior install often get flagged on inspection. We bring them into compliance.
What to Check Before Your San Francisco Aluminum Fence Install
A few things save headaches later. Know where your property line actually sits, since San Francisco lots can be tight, and a survey or the recorded plat is worth checking before anyone sets a post. Confirm whether your block has design review or HOA rules on fence height, style, and color. Note any plantings, irrigation, or utility lines along the run. And decide up front whether you need a pool barrier or gate with specific safety hardware, because that changes the spec. Cover those four points and the install goes smoothly. Our free estimate includes a walkthrough that catches these details.
FAQs – Aluminum Fence
How much does an aluminum fence cost in San Francisco?
An aluminum fence in San Francisco typically costs $3,400 to $9,800 installed, with most standard residential runs landing between $4,500 and $7,000. Price per foot runs about $35 – $55 for 4-foot decorative fencing and $48 – $80 for taller 5 – 6 foot privacy or security panels, plus gates and any site work. Call (866) 320-2646 for an exact quote. Estimates are free and the price you see is the price you pay.
Is aluminum or wrought iron better for a San Francisco yard?
For most San Francisco yards, aluminum is the better choice because it doesn’t rust in the salt air and needs no repainting. Wrought iron gives you the same traditional vertical-picket look and is heavier and stronger, but it corrodes near the coast and requires periodic maintenance. If you want the iron look without the upkeep, powder-coated aluminum is the practical answer. Call us and we’ll walk through both options for your specific property.
How long does aluminum fence installation take?
Most residential aluminum fence installs finish in one to two days once permits and layout are set. A straightforward 60-foot run with a walk gate is often a single-day job. Steep or terraced lots, large properties, multiple gates, and permit timelines add days. We give you a realistic timeline at the free estimate, not a surprise. Call (866) 320-2646 and a live person will help you schedule.
Does an aluminum fence need a permit in San Francisco?
It depends on height, location, and use. Fences above a certain height, corner-lot sight-line fences, and pool safety barriers can require a permit or trigger design review, while a standard low boundary fence on an interior lot often doesn’t. The rules vary by block and property type. We’ll tell you exactly what applies to your fence during the free estimate and handle the paperwork where it’s needed. Call us to get started.
Is it cheaper to repair or replace an aluminum fence?
Repair is usually cheaper when the damage is isolated to a gate, a hinge, a loose post, or a few panels, and we fix those routinely. Replace the whole run when posts are failing across the board, the powder coat has broadly failed, or the fence doesn’t meet current code. We’ll give you an honest repair-versus-replace call at the free estimate. Reach us at (866) 320-2646.
Can you come today?
For estimates and urgent fence issues, call us and a live person will tell you the soonest we can get out. We answer the phone 24 hours a day, 7 days a week, with no voicemail black holes. Same-day availability depends on schedule and the job. Call (866) 320-2646 for the fastest answer.
Related Fence and Home Services in San Francisco
Aluminum fencing is one piece of a bigger picture. If you’re planning work across the property, we can coordinate it under one contractor, from foundation to finish line. Explore the services and neighborhoods that come up most alongside this work:
- Home – our full-scope construction services for San Francisco homeowners.
- Fence Installation in other Bay Area cities and neighboring markets.
- Fence Installation in Oakland for East Bay projects across the bridge.
- Fence Installation in Daly City for fog-belt yards just south of the city.
- Fence Installation in San Mateo for Peninsula homeowners.
- Fence Installation in Berkeley for hillside and flatland lots alike.
- Fence Installation in Sausalito where salt air drives the material choice.
- Fence Repair in San Francisco for gates, posts, and panels that need correcting.
- Home Additions & ADU in San Francisco when a backyard build needs a matching pool or boundary fence.
- Roofing in San Francisco since exterior projects often get bundled.
- Windows & Doors in San Francisco for homeowners updating the whole exterior.
- Driveway & Pavers in San Francisco to tie a new gate into a new driveway.
Whether you’re replacing a rotted wood fence in the Sunset, adding a pool barrier after an ADU build, or establishing a clean boundary on a terraced lot in Noe Valley, aluminum is a durable, low-maintenance choice that suits this city’s climate. Our technicians have up to 12 years of experience, every job is background-checked and done in uniform, and the 730-Day Done Right Promise covers the work. Call (866) 320-2646 today for a free estimate. A live person answers, 24/7, and the price you see is the price you pay.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.