Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Tiburon: What It Costs and How the Job Runs
An aluminum fence in Tiburon typically runs $3,500 to $9,000 for a standard residential run, and most installs finish in two to four working days once the layout is set. The wide swing comes down to linear footage, grade changes on the slope, and whether your property line sits on a hillside lot where the panels have to be walked in from the street. Call (866) 320-2646 and we’ll walk your property, confirm the run, and hand you a written number before anyone orders a single panel.
How an Aluminum Fence Gets Built Here, Stage by Stage
Aluminum fence is a light, corrosion-resistant product, but on a Tiburon hillside it’s still a site job. Here’s the sequence we follow, and what you’ll need to decide at each point.
- Day 1 – walk and layout (about an hour). We mark the fence line, confirm property boundaries, set post spacing, and check for buried irrigation, low-voltage lighting, or anything else in the trench path. This is where you decide the height, rail style, and whether the run closes with a gate. Nothing gets dug until this is signed off.
- Day 1 – demo and clearing. If there’s an old fence, it comes out now and goes to disposal. On tight lots above Main Street, that often means carrying sections down to the street by hand or planning a dumpster drop where a truck can actually park.
- Day 1 to 2 – setting posts. Posts go into concrete footings set below frost and movement depth. On slopes, we step the panels rather than racking them, which keeps the fence level and the gaps even. Footings cure before anything hangs on them.
- Day 2 to 3 – panels, rails, and gates. Panels mount to the posts, gates get hung and adjusted, and we check every latch, hinge, and swing direction. This is your last easy moment to change gate placement.
- Final day – punch and walkthrough. We check alignment post to post, confirm hardware is tight, touch up any finish scuffs, and walk the finished fence with you. Coverage falls under our 730-Day Done Right Promise, so if something works loose or a section isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter on an Aluminum Fence
Most of the decisions happen before we break ground. These are the ones buyers weigh most.
- Residential vs. heavy-duty gauge: standard residential aluminum handles a typical yard run and costs less; heavier-gauge panels cost more upfront and hold up better along a street or driveway edge where something might lean on it.
- Powder-coat finish: black is the default and reads clean against hillside foliage; bronze and earth tones blend into the slope. All of them resist salt air better than bare or painted steel, which matters this close to the bay.
- Panel style and picket spacing: flatter-top, spear-top, and ornamental panels all install the same way but hit different price points, and tighter spacing is a heavier panel with more metal in it.
- Gates: a walk gate, a double drive gate, or a self-closing latch all add cost and hardware. Decide gate count and swing direction during layout, not after the posts are set.
- Slope handling: stepped panels cost more in fabrication and labor than a flat run and are the honest answer on a hillside lot.
We work with a curated set of material partners across every trade, and we’ll tell you plainly where a premium panel earns its price and where it doesn’t. That’s the same approach we take on a Fence Installation of any style.
What Aluminum Fence Costs in Tiburon, CA
Here’s the honest range for a residential aluminum fence in Tiburon:
| Scope | Typical price |
|---|---|
| Aluminum fence, standard residential run | $3,500 – $9,000 |
| Gate (walk or drive), installed | $600 – $1,800 |
| Old fence removal and disposal | $300 – $900 |
| Added footing or shoring on a steep lot | $500 – $2,500 |
What pushes a job toward the low end: a short run, a flat lot, easy street access, and a standard black residential panel. What pushes it to the high end: long footage, a hillside grade that needs stepped panels and deeper footings, a property line that requires material to be walked in from the street, or two or more gates. Written estimates cover materials, labor, footings, gate hardware, disposal, and the workmanship guarantee. If you want a full Fence Installation in Tiburon that integrates with an existing structure, that scope gets itemized line by line before contract. That’s our upfront pricing, no surprises, and what you see is what you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Tiburon Homes Specifically Do to This Job
Tiburon is a steep-hillside peninsula town, and nearly every fence project here is really a site-engineering project. On the narrow winding streets above Main Street and around Belvedere, a panel truck often can’t get within reach of the property line, so panels get walked or craned in – the same access reality that shapes every trade here and separates Tiburon from flatter places like Corte Madera. Our technicians size footing depth and post spacing around the actual grade, not a drawing. Salt air off Richardson Bay and the fog belt’s constant moisture cycling work on metal fasteners and powder-coat alike over the years, so we spec corrosion-resistant hardware from the start. Much of the housing stock is older, built into slopes, so we’re often working around an existing retaining wall or a cantilevered deck on one side of the run. All of this is covered under Tiburon service.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Tiburon
Most aluminum fence installs in Tiburon run two to four working days, with hillside access adding a day of handling on some lots. Call (866) 320-2646 for a free on-site walk and a firm schedule.
It depends on height, location, and whether your property is in an HOA or coastal zone, and we confirm that during the estimate rather than guess. Call (866) 320-2646 and we’ll tell you what your specific run requires.
Powder-coated aluminum resists salt corrosion far better than steel, and we spec corrosion-resistant fasteners so the finish holds up in waterfront air. Call (866) 320-2646 to talk through finish options for your exposure.
Residential aluminum fence typically runs $3,500 to $9,000, with gates and hillside footing work adding to the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every aluminum fence install is covered by our 730-Day Done Right Promise, from footing to gate. Call (866) 320-2646 with questions about what’s covered.
Get a Free Aluminum Fence Estimate in Tiburon
We’ll walk your property, confirm the run and gates, and give you a written line-item estimate at no charge. Calls are answered by a live person 24/7, and our technicians have up to 12 years of experience. Most Tiburon homeowners pair the fence with Driveway Repair & Replacement in Tiburon or Patios, Walkways & Pool Decks in Tiburon to finish the yard in one pass. Call (866) 320-2646 today.
Written by the team at Groundwork Construction Co.